Bundled Slash: A Potential New Biomass Resource for Fuels and Chemicals

Postharvest residues for southern pine species have not previously been quantified to compare volumes produced from both thinnings and clearcut volumes. A John Deere 1490 Slash Bundler bundled postharvest residues following a first thinning of a 14-year-old stand, a second thinning of a 25-year-old stand, and a clearcut of a naturally regenerated mature stand of 54 years of age. Regardless of stand type, nearly one-fifth of merchantable volume harvested was collected as postharvest residue. Initial bundle moisture contents were 127.3, 81.1, and 49.4% dry basis (db) for the first and second thinnings and mature stands, respectively. Bundle needles content was found to significantly influence the relative moisture contents of the bundles by stand type due to the high moisture content of needles compared to other bundle components. Bundles were stored outside and exposed to very hot and dry conditions and dried very rapidly to lowest moisture contents of 22.8, 14.5, and 13.5% (db) for first and second thinnings and mature stands, respectively. Response to moderating temperatures and higher precipitation resulted in rapid moisture content increase to 69.9, 46.2, and 38.1% (db) for the first and second thinnings and mature stand bundles by the end of the study. Temperature and precipitation and bundle percentage needles content all significantly influenced the rapid moisture content variations observed over the study periods.     

Effect of pyrolysis temperature and operating temperature on the performance of nanoporous carbon membranes

Technology designed to capture and store carbon dioxide (CO₂) will play a significant role in the near-term reduction of CO₂ emissions and is considered necessary to slow global warming. Nanoporous carbon (NPC) membranes show promise as a new generation of gas separation membranes suitable for CO₂ capture.We have made supported NPC membranes from polyfurfuryl alcohol (PFA) at various pyrolysis temperatures. Positron annihilation lifetime spectrometry (PALS) and wide angle X-ray diffraction (WAXD) results indicate that the pore size decreases whilst the porosity increases with increasing pyrolysis temperature. The membrane performance results support these findings with a significant increase in permeance being seen with increasing pyrolysis temperature, which relates to the increase in porosity.Mixed gas performance measurements also show an increase in CH₄ permeance as the operating temperature is increased from 35 to 200 °C, which can be related to an increase in the rate of diffusion. However, the selectivity decreases with increasing operating temperature due to the smaller changes in the CO₂ permeance. These smaller changes in CO₂ permeance can be related to the stronger adsorption of this gas on the carbon surface at lower operating temperatures. Interestingly, regardless of the original pyrolysis temperature, the selectivity at higher operating temperatures is similar, whereas the permeance remains related to this pyrolysis temperature.     

Reproducible cavitation activity in water-particle suspensions

The study of cavitation inception in liquids rarely yields reproducible data, unless special control is taken on the cleanliness of the experimental environment. In this paper, an experimental technique is demonstrated which allows repeatable measurements of cavitation activity in liquid-particle suspensions. In addition, the method is noninvasive: cavitation bubbles are generated using a shock-wave generator, and they are photographed using a digital camera. The cavitation activity is obtained after suitable image processing steps. From these measurements, the importance of the particle's surface structure and its chemical composition is revealed, with polystyrene and polyamide particles generating the highest yields. Further findings are that cavitation nuclei become depleted with an increasing number of experiments, and the existence of nuclei with varying negative pressure thresholds. Finally, a decrease of the cavitation yield is achieved by prepressurization of the suspension-indicating that the cavitation nuclei are gaseous.     

Catalytic effect of bases in impregnation of guanidine nitrate on Poplar (<Emphasis Type="Italic">Populus</Emphasis>) wood

Wood, one of the flammable material, was treated with aqueous solution of guanidine nitrate (GUN) and also with small amount of bases like N,N-dimethylformamide, 4-dimethylaminopyridine, pyridine, and triethylamine in the treating solution. These bases catalyze the impregnation of GUN as indicated by increase in mass gain percentage, elemental analysis, and scanning electron microscopy. To study their thermal behavior, dynamic thermogravimetry (TG) and derivative thermogravimetry (DTG) analysis under nitrogen atmosphere have been applied from ambient temperature to 973 K on all samples, at multiple linear heating rates 2.5, 5, 10, and 20 K min⁻¹. Non-isothermal, “model free” iso-conversional multiple heating rate methods, Ozawa–Flynn–Wall (O–F–W) and modified Coats–Redfern are used to calculate activation energy of samples. The activation energy of samples is found in the range 109–208 kJ mol⁻¹. Thermal parameters like overall pyrolysis duration, maximum mass loss rate, corresponding to DTG peak maximum and percentage char yield calculated at 873 K from TG curves are used to appraise the flammability of samples. Also, flammability of samples is determined by reliable methods namely limiting oxygen index and underwriters laboratories 94 (UL 94) test. The aforesaid study indicates that base catalyzed impregnated samples are less flammable than those impregnated with only GUN and untreated ones.     

Minimizing Carry-Over in an Online Pepsin Digestion System used for the H/D Exchange Mass Spectrometric Analysis of an IgG1 Monoclonal Antibody

Chromatographic carry-over can severely distort measurements of amide H/D exchange in proteins analyzed by LC/MS. In this work, we explored the origin of carry-over in the online digestion of an IgG1 monoclonal antibody using an immobilized pepsin column under quenched H/D exchange conditions (pH 2.5, 0?°C). From a consensus list of 169 different peptides consistently detected during digestion of this large, ~150?kDa protein, approximately 30?% of the peptic peptides exhibited carry-over. The majority of carry-over originates from the online digestion. Carry-over can be substantially decreased by washing the online digestion flow-path and pepsin column with two wash cocktails: [acetonitrile (5?%)/ isopropanol (5?%)/ acetic acid (20?%) in water] and [2?M guanidine hydrochloride in 100?mM phosphate buffer pH 2.5]. Extended use of this two-step washing procedure does not adversely affect the specificity or activity of the immobilized pepsin column. The results suggest that although the mechanism of carry-over appears to be chemical in nature, and not hydrodynamic, carry-over cannot be attributed to a single factor such as mass, abundance, pI, or hydrophobicity of the peptides.     

Unraveling the role of membrane proteins Notch, Pvr, and EGFR in altering integrin diffusion and clustering

The role of three membrane proteins in altering the diffusion and clustering of integrin receptors has been measured. Integrins are membrane proteins responsible for integrating intracellular and extracellular signaling events and anchoring cells to the extracellular matrix. The methodology used to elucidate the role of other membrane proteins in altering integrin diffusion and clustering combines fluorescence microscopy with RNA interference (RNAi), which is a technique to reduce the expression of a target protein. The three RNAi-targeted membrane proteins were epidermal growth factor receptor (EGFR), platelet-derived growth factor/vascular endothelial growth factor-related receptor (Pvr), and Notch. Real-time polymerase chain reaction or quantitative immunocytochemistry was used to measure a reduction in mRNA or protein concentration after RNAi treatment, respectively. Fluorescence recovery after photobleaching showed that reducing the concentration of EGFR or Notch results in less constrained integrin diffusion and, in the case of Notch RNAi, 4?% more mobile integrins. Fluorescence resonance energy transfer measurements performed before and after RNAi treatments indicate that clustering decreases for wild-type integrin, but increases for a high-ligand-affinity integrin mutant after reducing the expression of EGFR, Pvr, or Notch. A model to explain the measured changes after reducing the expression of these three membrane proteins involving cholesterol-enriched nanodomains is proposed.

Mass transport of O2 and N2 in nanoporous carbon (C168 schwarzite) using a quantum mechanical force field and molecular dynamics simulations

A hierarchical approach is used to calculate the single-component fluxes of N2 and O2 in nanoporous carbon molecular sieves (represented by C168 schwarzite) over a wide range of pressures and pressure drops. The self- and corrected diffusivities are calculated using equilibrium molecular dynamics simulations with force fields for the gas-carbon interactions obtained from quantum mechanical calculations. These results are combined with previously reported adsorption isotherms of N2 and O2 in C168 to obtain transport diffusivities and, by use of the Fick's equation of mass transport, to obtain single-component fluxes across the membrane. The diffusion coefficients and fluxes are also calculated using an empirical potential, which has been obtained by fitting low coverage adsorption data of N2 and O2 on a planar graphite sheet. By analyzing the diffusivities calculated with the ab initio potential in the limit of infinite dilution over the temperature range from 80 to 450 K, it is observed that the N2/O2 separation is energetically driven and a high selectivity of O2 over N2 can be obtained at low temperatures. However, with the empirical potential both the energetic and entropic contributions to selectivity were found to be close to unity. Similarly, by calculating single-component fluxes and ideal selectivities at 300 K and finite pressures it is found that the ab initio potential better explains the large O2/N2 selectivities of similarly sized molecules that have been observed experimentally. An interesting reversal in ideal selectivity is observed by adjusting the pressure at the two ends of the membrane. As a consequence, we predict that a highly selective kinetic separation in favor of either nitrogen or oxygen could be obtained with the same membrane depending on the operating conditions.     

Controlled multibubble surface cavitation

Heterogeneous bubble nucleation at surfaces has been notorious because of its irreproducibility. Here controlled multibubble surface cavitation is achieved by using a hydrophobic surface patterned with microcavities. The expansion of the nuclei in the microcavities is triggered by a fast lowering of the liquid pressure. The procedure allows us to control and fix the bubble distance within the bubble cluster. We observe a perfect quantitative reproducibility of the cavitation events where the inner bubbles in the two-dimensional cluster are shielded by the outer ones, reflected by their later expansion and their delayed collapse. Apart from the final bubble collapse phase (when jetting flows directed towards the cluster's center develop), the bubble dynamics can be quantitatively described by an extended Rayleigh-Plesset equation, taking pressure modification through the surrounding bubbles into account.     

Randers change of <Emphasis Type="Italic">m</Emphasis><Superscript>th</Superscript> root metric

The present paper deals with a Randers metric that has been derived after a particular β-change in the mth root metric. Various geometers such as [7], [9], [10] etc. have studied the mth root metric and its transformations. We have obtained some tensors and theorems holding the relation between the Finsler space equipped with the mth root metric and the one obtained after its Randers change.