Amidines derived from Pt(IV)-mediated nitrile-amino alcohol coupling and their Zn(II)-catalyzed conversion into oxazolines

The reaction between the platinum(IV) complex trans-[PtCl(4)(EtCN)(2)] and the amino alcohols NH(2)CH(2)CH(2)OH, NH(2)CH(2)CH(Me)OH-(R)-(-), NH(2)CH(Ph)CH(2)OH-(R)-(-), NH(2)CH(Et)CH(2)OH-(R)-(-), NH(2)CH(Et)CH(2)OH-(S)-(+), and NH(2)CH(Pr(n)())CH(2)OH proceeds rapidly at room temperature in CH(2)Cl(2) to furnish the amidine complexes [PtCl(4)(HN=C(Et)NH(arcraise;)OH)(2)] (1-6) in good yield (70-80%). The related reaction between the platinum(II) complex trans-[PtCl(2)(EtCN)(2)] and monoethanolamine in a molar ratio of 1:2 in CH(2)Cl(2) results in the addition of 4 equiv of NH(2)CH(2)CH(2)OH per mole of complex to give [Pt(HN=C(Et)NHCH(2)CH(2)OH)(2)(NH(2)CH(2)CH(2)OH)(2)](2+) (7). Formulation of 1-6 is based upon satisfactory C, H, N elemental analyses, electrospray mass spectrometry, IR spectroscopy, and (1)H, (13)C((1)H), (15)N, and (195)Pt NMR spectroscopies, while the structures of trans-[PtCl(4)((Z)-NH=C(Et)NHCH(2)CH(2)OH)(2)] (1), trans-[PtCl(4)((Z)-NH=C(Et)NHCH(2)CH(Me)OH-(R)-(-))(2)] (2), and trans-[PtCl(4)((Z)-NH=C(Et)NHCH(Et)CH(2)OH-(R)-(-))(2)] (4) were determined by X-ray single-crystal diffraction. The Z-amidine configuration of the ligands is preserved in CDCl(3) solutions as confirmed by gradient-enhanced (15)N,(1)H-HMQC spectroscopy and NOE experiments. The amidines, formed upon Pt(IV)-mediated nitrile-amino alcohol coupling, were liberated from their platinum(IV) complexes 1, 3, and 4 by reaction with Ph(2)PCH(2)CH(2)PPh(2) (dppe) giving free NH=C(Et)NHCHRCH(2)OH (R = H 8, Et 9, Ph 10), with the substituents R of different types, and dppe oxides; the P-containing species were identified by (31)P((1)H) NMR spectroscopy. NOESY spectroscopy indicates that the liberated amidines retained the same configuration relative to the C=N double bond, i.e., syn-(H,Et)-NH=C(Et)NHCHRCH(2)OH. The liberated hydroxo-functionalized amidines 8-10 were converted into oxazolines (11-13) in the presence of a catalytic amount of ZnCl(2). A similar catalytic effect has also been reached using anhydrous MSO(4) (M = Cu, Co, Cd), CdCl(2), and AlCl(3).     

Gamma radiation effects on physical properties of parchment documents: Assessment of Dmax

Parchments are important documents that give testimony for History; therefore these materials should be respected and preserved. Considering incremental biodeterioration problems that have to be faced daily, the Archive of the University of Coimbra (AUC) is involved in different scientific projects in order to evaluate and determine new methods for document decontamination and preservation.The aim of this study was to evaluate gamma radiation effects on the colour and texture of the AUC parchment documents. The assessment of these effects was used to estimate the maximum gamma radiation dose (D_max) that could guarantee parchment documents′ decontamination treatment, without significant alteration of their physical properties. Parchment samples were exposed to gamma radiation doses ranging from 10 to 30 kGy. The texture and colour of samples were assessed before and after the irradiation procedure, using a texture analyser and an electronic colorimeter. Hardness and springiness were determined based on texture spectra. Lightness (L?), Chroma (C), greenness vs. redness (a*) and yellowness vs. blueness (b*) values were obtained from colorimetric measures. Results indicate no significant effects of gamma radiation on the texture and colour of parchment for the studied doses.     

Mixing method influence on compatibility and polymorphism studies by DSC and statistical analysis

Most of the pharmaceutical products are formulated as solid dosage form, which may present drug–excipient interactions that lead to changes in the chemical nature of the drug, such as solubility and bioavailability and may compromise its safety and effectiveness. Differential scanning calorimetry (DSC) is a widely used method for the rapid evaluation of the drug-excipient compatibility and the stability of the mixture formed; however, there is no consensus on the preparation methods of the drug–excipient mixtures. The aim of this study was to investigate the influence of the mixing method on the drug–excipient compatibility studies by means of DSC analysis, using tenofovir disoproxil fumarate as a drug model. Statistical analysis revealed significant differences in the heat of fusion of the drug in the mixtures prepared by several mixing methods. Vortex Mixer with a Pop-Off Cup used for 3 min proved to be very satisfactory for these studies. A polymorphic transition was observed in the mixture prepared with the mortar and pestle. Therefore, this method should be avoided since it may induce errors in the interpretation of DSC results. In this way, the mixing method used to prepare a mixture for studies of interactions between the API and the excipients in a pharmaceutical formulation has a great influence on the results and it must be chosen carefully.     

Microwave-assisted oxidation of silibinin: a simple and preparative method for the synthesis of improved radical scavengers

A new and preparative oxidation of silibinin has been developed to give access to two different silibinin derivatives known for their enhanced antioxidant properties. Conventional heating methods were compared with results obtained from microwave (MW) heating. The base-catalysed oxidation of silibinin under MW heating is a very efficient method for the preparation of 2,3-dehydrosilybin and a related silybin rearrangement product. This latter compound shows enhanced radical scavenging properties. Optimised conditions were used to prepare 2,3-dehydrosilybins A and B from optically pure silybins A and B. An efficient, preparative purification method was also developed to enable isolation of different products in high purity.     

Hydroformylation and hydroalkylcarbonylation of 3,4-dihydro[2H]pyran catalysed by Co2(CO)8 under syngas conditions

In the cobalt-catalysed hydroformylation of 3,4-dihydro[2H]pyran, the influence of different reaction parameters such as time, pressure, triphenylphosphine addition, catalyst and substrate concentration has been investigated. 2-formyl-tetrahydropyran, tetrahydropyran and a hydroalkylcarbonylation product were the main reaction products. The selectivity towards 2-formyl-tetrahydropyran formation is favoured at constant catalyst and substrate concentration. The coordination of the pyran’s oxygen to the cobalt atom seems to be an important intermediate for the formation of 2-formyl-tetrahydropyran. Different substrate or catalyst concentrations promote the formation of other reduced products. The addition of triphenylphosphine to the catalyst leads to a less active species, which decreases the yield and promotes the hydroalkylcarbonylation reaction.     

Conformational Analysis of the Anti‐obesity Drug Lorcaserin in Water: How To Take Advantage of Long‐Range Residual Dipolar Couplings

The conformational state of 8‐chloro‐1‐methyl‐2,3,4,5‐tetrahydro‐1H‐3‐benzazepine hydrochloride (lorcaserin) in water has been determined on the basis of one‐bond and long‐range C? H residual dipolar coupling (RDC) data along with DFT computations and ³J_HH coupling‐constant analysis. According to this analysis, lorcaserin exists as a conformational equilibrium of two crown‐chair forms, of which the preferred conformation has the methyl group in an equatorial orientation.     

The role of nanocellulose fibers, starch and chitosan on multipolysaccharide based films

Thin nanocomposite films of thermoplastic starch, chitosan and cellulose nanofibers (bacterial cellulose or nanofibrillated cellulose) were prepared for the first time by solvent casting of water based suspensions of the three polysaccharides. The role of the different bioploymers on the final properties (thermal stability, transparency, mechanical performance and antimicrobial activity) of the films was related with their intrinsic features, contents and synergic effects resulting from the establishment of interactions between them. Thermoplastic starch displays an important role on the thermal stability of the films because it is the most stable polysaccharide; however it has a negative impact on the mechanical performance and transparency of the films. The addition of chitosan improves considerably the transparency (up to 50 % transmittance for 50 % of chitosan, in respect to the amount of starch), mechanical performance and antimicrobial properties (at least 25 % of chitosan and no more than 10 % of cellulose nanofibers are required to observe bacteriostatic or bactericidal activity) but decrease their thermal stability. The incorporation of cellulose nanofibers had the strongest positive impact on the mechanical properties of the materials (increments of up to 15 and 30 MPa on the Young′s modulus and Tensile strength, respectively, for films with 20 % of BC or NFC). Nonetheless, the impact in thermal stability and mechanical performance of the films, promoted by the addition of chitosan and cellulose nanofibres, respectively, was higher than the expected considering their percentage contents certainly because of the establishment of strong and complex interactions between the three polysaccharides.