Synthesis and characterization of a π-conjugate, covalent layered network derived from condensation polymerization of the 4,4′-bipyridine-cyanuric chloride couple

Nucleophilic substitutions of the reactive chlorine atoms in cyanuric chloride by the bridging 4,4′-bipyridine in refluxing toluene lead to quaternarization of the latter and the subsequent formation of a π-conjugate, covalent layered network. The network is composed of central 1,3,5-triazine units with 4,4′-bipyridinium rings covalently attached and balanced by the released chloride ions. Due to the extremely high electron deficiency of the triazine rings, the material undergoes partial reduction by its compensated chloride ions resulting in a radical concentration of 1 × 10²⁰ spin g⁻¹, according to EPR quantitative analysis. In this instance, the radicals provide stability to the organic network by minimizing its electron deficiency. The material exhibits thermal and electrochemical stability, as evidenced by thermal gravimetric analysis (TGA) and cyclic voltammetry techniques. As such, the π-conjugate organic material displays low band gaps and electrical conductivity in the range of 10⁻⁴-10⁻⁵ S cm⁻¹ at room temperature.     

Sintering of hydroxyapatite lath-like powders

Hydroxyapatite powders, which consisted of lath-like single-crystalline particles, were calcined at two different temperatures. Green and calcined powders were used for sintering HAp ceramic samples under uniaxial pressing. Powders and sintered samples were studied using various analytical techniques in order to determine how calcination affects the particle properties and the sintering behavior of HAp powders. It was found that calcination decreases the particles length and changes the particles morphology from lath-like to spherical shape. The relative density increases with increasing calcination temperature and aging time. It was found that long aging time favor the formation of thermally stable HAp particles, whereas a shorter one results in the formation of β-calcium phosphate during thermal treatment. Sintering of compacted powders begins at temperatures greater than 900°C, with a trend to increase the onset temperature as the calcination temperature is increased.     

Spectroscopic and catalytic studies of lipases in ternary hexane-1-propanol-water surfactantless microemulsion systems

A series of water-in-oil microemulsion systems formulated without surfactant were used to solubilize lipases from Rhizomucor miehei and Candida antarctica B. The effect of the system's composition on the velocity of enzymic reactions was investigated following a model esterification reaction. The interaction between enzymes and the microemulsion environment was studied by steady state fluorescence spectroscopy. The site of localization of the enzyme within the different microdomains of the dispersed phase was investigated by applying the fluorescence energy transfer technique. To determine the properties of the interface between water and organic solvent of the surfactantless microemulsion systems the Electron Paramagnetic Resonance (EPR) spectroscopic technique was applied. The results indicated that even at low water content, water-rich structures are formed. This was confirmed by conductivity measurements. By the addition of enzyme it was observed that when the aqueous phase of the surfactantless microemulsion systems exceeds 2% (v/v) the enzyme retains its catalytic activity, as it is located within the water pools that protect it from the organic solvent. These confined water phases show a propanol rich interface with hexane and their structure depends on the system's composition.     

Ultra high performance liquid chromatography tandem mass spectrometric detection of glucuronides resistant to enzymatic hydrolysis: Implications to doping control analysis

Controversial results have been reported in the literature regarding the behavior of two testosterone (T) metabolites (3α-glucuronide-6β-hydroxyandrosterone and 3α-glucuronide-6β-hydroxyetiocholanolone) excreted after T administration. Due to their potential as biomarkers of T misuse, a UHPLC–MS/MS method for the direct quantification of these glucuronides was developed and validated. In addition, the main phase II metabolites of T that compose the steroid profile used for doping control purposes (glucuronides of T, epitestosterone, androsterone and etiocholanolone) were included. The method was found to be linear and with suitable LODs and LOQs for all metabolites. The average accuracies were between 86% and 120%, the RSDs for the intra- and inter-day precision were below 15% and 25% respectively. The method showed low matrix effect. Samples obtained before and after the administration of T were analyzed by both the developed UHPLC–MS/MS method and the GC–MS/MS method currently used by anti-doping laboratories. Relevant disagreements between the results obtained for 3α-glucuronide-6β-hydroxyandrosterone and 3α-glucuronide-6β-hydroxyetiocholanolone quantitation were observed. These markers seemed to be more suitable for the screening of T misuse when detected by UHPLC–MS/MS. These discrepancies were further investigated in 50 urine samples from healthy volunteers. The two methods gave highly correlated results for all metabolites that are currently included in the athlete's steroid profile confirming the reliability of the UHPLC–MS/MS method. However, the quantification of 3α-glucuronide-6β-hydroxyandrosterone and 3α-glucuronide-6β-hydroxyetiocholanolone, was only possible by using the UHPLC–MS/MS method since three interfering compounds were observed when performing the GC–MS/MS analysis with the most intense ion transitions. These results confirm the potential of the resistant glucuronides as biomarkers of T misuse. Additionally, they suggest that previously reported reference ranges for these metabolites should be reevaluated.     

Characterization of cephalexin loaded nonionic microemulsions

Water/propylene glycol/sucrose laurate/ethoxylated mono-di-glyceride/isopropyl myristate/peppermint oil U-type microemulsions were used to solubilize cephalexin. Microemulsion dilution and interfacial factors contributing to the cephalexin solubilization were evaluated. Cephalexin solubilization capacity increases with the increase in the aqueous phase volume fraction (φ) up to 0.4 then decreases. Electrical conductivity of drug loaded and drug free microemulsions increases with φ. The hydrodynamic radius measured by dynamic light scattering of the oil-in-water loaded microemulsions decreases with temperature. The microemulsions were characterized by the volumetric parameters, density, excess volume, ultrasonic velocity and isentropic compressibility. The microemulsion densities increase with φ up to 0.8 then decrease. The excess volume decreases with φ up to 0.8 then stabilizes. Ultrasonic velocities increase with the increase in φ while isentropic compressibility decreases. Analysis of the volumetric parameters enabled the characterization of structural transition along the microemulsion phase region. The presence of water-in-oil, bicontinuous and oil-in-water microemulsions, at aqueous phase volume fractions below 0.2, between 0.3 and 0.7 and above 0.8, respectively were found. Interfacial properties and dynamic structure of the monolayer for drug loaded and drug free microemulsions, were studied by electron paramagnetic resonance spectroscopy employing the nitroxide spin probe 5-doxylstearic acid. The rigidity of the interface was affected by the water content and also the presence of cephalexin.     

Impedance spectroscopy study on the ionic conductivity processes of the novel LiFeVO<Subscript>4</Subscript> phase

The recently discovered compound LiFeVO₄ was prepared by solid-state reaction at 570 °C during a 7-h period. The X-ray diffraction pattern revealed an orthorhombic crystal structure. Thermogravimetric measurements revealed a reversible mechanism which was attributed to absorption–desorption of humidity. Impedance spectroscopy measurements were carried out at 25 °C steps in the temperature range from 25 to 500 °C and equivalent circuits were drawn to fit the impedance measurement results at each temperature level. The elements of the equivalent circuits were assigned to bulk, grain boundary, and along grain boundary conductivity. All three conduction mechanisms were found to be humidity sensitive. Arrhenius plots were plotted for the bulk and grain boundary conductivity processes. The activation energy for the bulk conductivity process was calculated to be 0.25 eV over the temperature range from 175 to 500 °C and the activation energy for the grain boundary conductivity process was calculated to be 0.41 eV from 300 to 500 °C and 0.20 eV from 175 to 275 °C. An explanation for the existence of these two grain boundary activation energies is attempted. The dependence of the material conductivity mechanisms on humidity suggests that LiFeVO4 could be used as a humidity sensor.     

Three-dimensional unsaturated flow in heterogeneous systems and implications on groundwater contamination: A stochastic approach

A stochastic approach for modeling transient unsaturated flow in large-scale spatially variable soils is developed in order to overcome the problem of limited information about the local details of spatial soil variability. It is assumed that local soil properties are realizations of three-dimensional stationary random fields, and a large-scale model representation is derived by averaging the local governing flow equation over the ensemble of realizations of the underlying soil property random fields. The three-dimensionality of the local flow equations and the nonlinear dependence of the local flow output on the local soil properties are considered. The resulting mean representation (structure) is in the form of a partial differential equation in which averaged or effective model parameters occur. These effective model parameters are evalutated using a quasi-linearized fluctuation equation and a spectral representation of stationary processes. The large-scale model structure considers the large-scale effects of soil variability and have relatively few parameters which should be identifiable from a realistic data set. The general stochastic theory is then applied to the case of flow in stratified soil formations, which is of practical importance in applications such as waste disposal control. An important finding of this study is that spatial variability of the hydraulic soil properties produces significant large-scale effects, such as large-scale hysteresis and anisotropy of the effective parameters. These large-scale effects should be considered in field applications such as for predicting the movement of liquid wastes in the unsaturated zone.     

Fourier Transform and Multi Dimensional EPR Spectroscopy for the Characterization of Hydroxyapatite Gels

Calcium hydroxyapatite powder was prepared by the sol-gel method, using calcium acetate and PO(OC₂H₅)₃ as initialcompounds, and alcohol(methyl, ethyl, and propyl-alcohol) as solvent. Homogenous solutions andgels were prepared, using a molar ratio of Ca / P = 1.67. Theevolution of the structure was followed by XRD (X-ray diffraction), IR(Infrared), and FT-n(= 1, 2, 3)D-EPR (Fourier transform Electron Paramagnetic Resonance) spectroscopy. The dried gel exhibits a signalcharacterized by a central line and two satellites. The 2D spectrum(Electron Spin Echo Envelop Modulation ESEEM vs. field sweep) showed thesame modulation for the central line. The FT-EPR spectrum vs. field sweep2D-spectrum indicated that the satellites are due to an hfs splitting withwater. The central region of this 2D spectrum is influenced by P and H in a concentration ratio of[H] / [P] = 2.5. TheESEEM spectrum was simulated, assuming the equation for two spin systems S = 1/2 andI = 1/2. This simulation gave, for m and n, the values of 2 and5, respectively. This finding suggests a–P–O–P–O–P– linear evolution of thestructure. It appears that one ethyl group does not hydrolyze in thegelation process. This result was confirmed by IRspectroscopy.