Synthetic Utilization of α-Phosphonovinyl Anions

The α-phosphonovinyl anions, generated in situ from treatment of β-hetero-substituted vinyl-phosphonates 1a-c with LDA (or LTMP), were trapped with various electrophiles such as chlorotriorganosilanes, chlorotrimethylgermane, chlorotriorganotins, dimethyl disulfide, and halogen to afford the corresponding β-hetero-substituted α-functionalized vinylphosphonates 2–14 in good to excellent yields. The Friedel-Crafts reaction of α-(silyl) or α-(germyl)phosphonoketene dithioacetals 2, 9 or 4 with acid chlorides gave α-acylated phosphonoketene dithioacetals 15–19 in 53–91 % yields. The palladium-catalyzed cross-coupling reaction of β-ethoxy-α-(tributylstannyl)vinylphosphonate 13 with a variety of organic halides (R = acyl, allyl, aryl etc.) provided β-ethoxy-α-substituted vinylphosphonates 20–25 in good to moderate yields. The palladium-mediated cross-coupling reaction of α-(iodo)-vinyl-phosphonates 7, 14 with terminal acetylenes afforded α-alkynylated vinylphosphonates 26–29 in 69–83 % yields.     

Cross‐Coupling of Organolithium with Ethers or Aryl Ammonium Salts by C−O or C−N Bond Cleavage

Various aryl‐, alkenyl‐, and/or alkyllithium species reacted smoothly with aryl and/or benzyl ethers with cleavage of the inert C?O bond to afford cross‐coupled products, catalyzed by commercially available [Ni(cod)₂] (cod=1,5‐cyclooctadiene) catalysts with N‐heterocyclic carbene (NHC) ligands. Furthermore, the coupling reaction between the aryllithium compounds and aryl ammonium salts proceeded under mild conditions with C?N bond cleavage in the presence of a [Pd(PPh₃)₂Cl₂] catalyst. These methods enable selective sequential functionalizations of arenes having both C?N and C?O bonds in one pot.     

Structure Revision of Caesalpinistas A and B and Isolation of a New Furanoditerpenoid from the Cotyledons of Caesalpinia decapetala var. japonica

A known cassane‐type furanoditerpenoid, caesalpinista B ( 1 ), and a new diterpenoid, deoxycaesaljaponin A ( 2 ), were isolated from the cotyledons of Caesalpinia decapetala var. japonica. The previously reported configurational assignments of 1 and the related diterpenoid caesalpinista A ( 3 ) were revised on the basis of X‐ray crystallography and chemical conversion. The structure of 2 was elucidated by spectroscopic data and chemical conversion into 3 .     

Syntheses, characterization, and dioxygen reactivities of Cu(I) complexes with cis,cis-1,3,5-triaminocyclohexane derivatives: a Cu(III)2O2 intermediate exhibiting higher C-H activation

Six Cu(I) complexes with cis,cis-1,3,5-triaminocyclohexane derivatives (R3CY, R = Et, iBu, and Bn), [Cu(MeCN)(Et3CY)]SbF6 (1), [Cu(MeCN)(iBu3CY)]SbF6 (2), [Cu(MeCN)(Bn3CY)]SbF6 (3), [Cu(CO)(Et3CY)]SbF6 (4), [Cu(CO)(iBu3CY)]SbF6 (5), and [Cu(CO)(Bn3CY)]SbF6 (6), were prepared to probe the ability of copper complexes to effectively catalyze oxygenation reactions. The complexes were characterized by elemental analysis, electrochemical and X-ray structure analyses, electronic absorption spectroscopy, IR spectroscopy, 1H NMR spectroscopy, and ESI mass spectrometry. The crystal structures of 1-3 and 6 and the CO stretching vibrations (nuCO) of 4-6 demonstrate that the ability of R3CY to donate electron density to the Cu(I) atom is stronger than that of the previously reported ligands, 1,4,7-triazacyclononane (R3TACN) and 1,4,7-triazacyclodecane (R3TACD). Reactions of complexes 1-3 with dioxygen in THF or CH2Cl2 at -105 to -80 degrees C yield bis(mu-oxo)dicopper(III) complexes 7-9 as intermediates as confirmed by electronic absorption spectroscopy and resonance Raman spectroscopy. The Cu-O stretching vibrations, nu(Cu-O) for 7 (16O2: 553, 581 cm-1and 18O2: 547 cm-1) and 8 (16O2: 571 cm-1 and 18O2: 544 cm-1), are observed in a lower energy region than previously reported for bis(micro-oxo) complexes. The decomposition rates of complexes 7-9 in THF at -90 degrees C are 2.78 x 10-4 for 7, 8.04 x 10-4 for 8, and 3.80 x 10-4 s-1 for 9. The decomposition rates of 7 and 8 in CH2Cl2 were 5.62 x 10-4 and 1.62 x 10-3 s-1, respectively, and the thermal stabilities of 7-9 in CH2Cl2 are lower than the values measured for the complexes in THF. The decomposition reactions obeyed first-order kinetics, and the H/D isotope experiments for 8 and 9 indicate that the N-dealkylation reaction is the rate-determining step in the decomposition processes. On the other hand, the decomposition reaction of 7 in THF results in the oxidation of THF (acting as an exogenous substrate) to give 2-hydroxy tetrahydrofuran and gamma-butyrolactone as oxidation products. Detailed investigation of the N-dealkylation reaction for 8 by kinetic experiments using N-H/D at -90 degrees C showed a kinetic isotope effect of 1.25, indicating that a weak electrostatic interaction between the N-H hydrogen and mu-oxo oxygen contributes to the major effect on the rate-determining step of N-dealkylation. X-ray crystal structures of the bis(micro-hydroxo)dicopper(II) complexes, [Cu2(OH)2(Et3CY)2](CF3SO3)2 (10), [Cu2(OH)2(iBu3CY)2](CF3SO3)2 (11), and [Cu2(OH)2(Bn3CY)2](ClO4)2 (12), which have independently been prepared as the final products of bis(micro-oxo)dicopper(III) intermediates, suggest that an effective interaction between N-H and mu-oxo in the Cu(III)2(micro-O)2 core may enhance the oxidation ability of the metal-oxo species.     

Thermal change of Alq3, tris(8-hydroxyquinolinato) aluminum(III) studied by TG and XRD-DSC

The thermal change of the tris(8-hydroxyquinolinato)aluminum (Alq₃) is currently investigated by XRD-DSC and TG. The phase transition of Alq₃ from α-phase to γ-phase takes place at 643–669 K. A very sharp peak with the peak temperature at approx. 709 K is ascribed to the melting of the Alq₃. The decomposition of the Alq₃ was observed accompanied with the melting and evaporation at >703K. The effect of the atmospheres on the mass loss procedure was studied by TG. It was found that thermal process of Alq₃ was strongly influenced by the partial pressure of water vapor in the atmosphere instead of oxygen.     

Two-directional elaboration of hydroxyacetone under thermodynamically controlled conditions: allylation or 2-propynylation and aldol reaction

Enolate generated from O-(tetrahydropyran-2-yl)hydroxyacetone under thermodynamically controlled conditions (1.3 equiv of NaH, THF, 0 degrees C to rt) was allylated at the carbon bearing the protected hydroxy group with very high regioselectively. When tert-BuOH, equivalent to the excessive portion of initially added NaH, was introduced into the mixture followed by addition of aldehyde, aldol reaction took place on the methyl group to give 1-substituted 4-hydroxy-(1E),6-heptadien-3-one in acceptable yields after acidic treatment of the mixture for dehydration and deprotection. Introducing a chiral auxiliary protecting group into hydroxyacetone led to asymmetric allylation though stereoselectivity was around 50% ee. Thus, the hidden aspect of the chemoselective nature of protected hydroxyacetone-derived enolate generated under thermodynamically controlled conditions has opened a new avenue for two-directional elaboration of hydroxyacetone that should be potentially useful in organic synthesis.     

Solid-phase extraction system for Pb (II) ions enrichment based on multiwall carbon nanotubes coupled on-line to flame atomic absorption spectrometry

The present paper proposes the application of multiwall carbon nanotubes (MWCNTs) as a solid sorbent for lead preconcentration using a flow system coupled to flame atomic absorption spectrometry. The method comprises the preconcentration of Pb (II) ions at a buffered solution (pH 4.7) onto 30 mg of MWCNTs previously oxidized with concentrated HNO₃. The elution step is carried out with 1.0 mol L⁻¹ HNO₃. The effect of the experimental parameters, including sample pH, sampling flow rate, buffer and eluent concentrations were investigated by means of a 2⁴ full factorial design, while for the final optimization a Doehlert design was employed. Under the best experimental conditions the preconcentration system provided detection and quantification limits of 2.6 and 8.6 μg L⁻¹, respectively. A wide linear range varying from 8.6 up to 775 μg L⁻¹ (r > 0.999) and the respective precision (relative standard deviation) of 7.7 and 1.4% for the 15 and 200 μg L⁻¹ levels were obtained. The characteristics obtained for the performance of the flow preconcentration system were a preconcentration factor of 44.2, preconcentration efficiency of 11 min⁻¹, consumptive index of 0.45 mL and sampling frequency estimated as 14 h⁻¹. Preconcentration studies of Pb (II) ions in the presence of the majority foreign ions tested did not show interference, attesting the good performance of MWCNTs. The accuracy of the method was assessed from analysis of water samples (tap, mineral, physiological serum and synthetic seawater) and common medicinal herbs submitted to the acid decomposition (garlic and Ginkgo Biloba). The satisfactory recovery values obtained without using analyte addition method confirms the feasibility of this method for Pb (II) ions determination in different type of samples.     

Protein adsorption characteristics of calcium hydroxyapatites modified with pyrophosphoric acids

Protein adsorption characteristics of calcium hydroxyapatite (Hap) modified with pyrophosphoric acids (PP(a)) were examined. The PP(a) modified Hap particles (abbreviated as PP-Hap) possessed anchored polyphosphate (PP: P-{O-PO(OH)}(n)-OH) branches on their surfaces. The proteins of bovine serum albumin (BSA: isoelectric point (iep)=4.7, molecular mass (M(s))=67,200 Da, acidic protein), myoglobin (MGB: iep=7.0, M(s)=17,800 Da, neutral protein), and lysozyme (LSZ: iep=11.1, M(s)=14,600 Da, basic protein) were examined. The zeta potential (zp) of PP-Hap particles as a function of pH overlapped; zp-pH curves were independent of the concentration of pyrophosphoric acids (abbreviated as [PP(a)]) used for modifying Hap surface. The saturated amounts of adsorbed BSA (Delta n(ads)(BSA)) were increased three-fold by the surface modification with PP(a) though they were independent of the [PP(a)]. Furthermore, the fraction of BSA desorption was independent of the [PP(a)]. This enhancement of BSA adsorption onto the PP-Hap is due to the hydrogen bonding between oxygen and OH groups of the PP-branches and functional groups of BSA molecules. In the case of LSZ, a more higher adsorption enhancement was observed; the saturated amount of adsorbed LSZ (Delta n(ads)(LSZ)) for Hap modified at [PP(a)]=6 mmol/dm(3) was nine-fold than that for Hap unmodified. This remarkable adsorption enhancement was explained by a three-dimensional binding mechanism; LSZ molecules were trapped inside of the PP-branches. Hence, a fraction of LSZ desorption was decreased with an increase in the [PP(a)]; as more PP-branches are presented on the surface the higher retardation of LSZ desorption was induced. It was expected from their small size that MGB adsorb between the PP-branches as well as LSZ. However, the amounts of adsorbed MGB (Delta n(ads)(MGB)) did not vary and were independent of the [PP(a)] due to the small numbers of functional groups of MGB. In addition, no dependence of the fraction of MGB desorption on the [PP(a)] was observed. The results of zp for all the protein systems supported the mode of protein adsorption discussed. The anchored structure of the PP-branches developed on the Hap surface to provide three-dimensional protein adsorption spaces was proved by a comparative experiment that was elucidating the effect of pyrophosphate ions for BSA adsorption onto Hap.     

Effects of amino acids on the formation of hematite particles in a forced hydrolysis reaction

The influence of amino acids on the formation of hematite particles from a forced hydrolysis reaction of acidic FeCl3 solution was examined. The spherical particles were produced on the systems with L-phenylalanine (L-Phe), L-serine (L-Ser) and L-alanine (L-Ala), though L-glutamine (L-Gln) and L-glutamic acid (L-Glu) gave ellipsoidal hematite particles. This morphological change in hematite particles is consistent with the order of stability constant of amino acids against to Fe3+ ions (K). The hematite particles produced with L-Glu, L-Gln and L-Ser were highly porous because they are formed by aggregation of cluster particles. These particles exhibited microporous behavior by outgassing the particles below 200 degrees C while they changed to mesoporous after treating above 300 degrees C by elimination of amino acids molecules remained between the cluster particles within the hematite particles. The hematite particles strongly depended on the nature of amino acids such as alternation of solution pH and adsorption affinity to beta-FeOOH and/or polynuclear primary (PN) particles. The systems on L-Ala and L-Phe, showing very rapid phase transformation from beta-FeOOH to hematite, exhibited the Ostwald ripening. A rotational particle preparation procedure suggested that the morphology of hematite particle is governed by the mode and strength of amino acid adsorption onto beta-FeOOH and/or PN particles.     

The spin mixing process of a radical pair in low magnetic field observed by transient absorption detected nanosecond pulsed magnetic field effect

The spin mixing process of the radical pair in the sodium dodecyl sulfate (SDS) micelle is studied by using a novel technique nanosecond pulsed magnetic field effect on transient absorption. We have developed the equipment for a nanosecond pulsed magnetic field and observed its effect on the radical pair reaction. A decrease of the free radical yield by a reversely directed pulsed magnetic field that cancels static field is observed, and the dependence on its magnitude, which is called pulsed MARY (magnetic field effect on reaction yield) spectra, is studied. The observed spectra reflect the spin mixing in 50-200 ns and show clear time evolution. Theoretical simulation of pulsed MARY spectra based on a single site modified Liouville equation indicates that the fast spin dephasing processes induced by the modulation of electron-electron spin interaction by molecular reencounter affect to the coherent spin mixing by a hyperfine interaction in a low magnetic field.