Determination of the addendum modification at helical gears,at the points where the meshing starts and ends,based on the relative velocity equalization criterion

The paper gives a new method for the determination of the specific addendum modifications at helical gears. The method is based on the equalization of the relative velocities at the points where the meshing of the teeth begins and ends. The numerical values were obtained for some given gears using MathCAD. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Compressibility effects on the dynamic characteristics of gas lubricated mechanical components

The present Note deals with the effects of compressibility on the linearized dynamic characteristics of gas lubricated mechanical components (journal and thrust bearings). Although the effect of compressibility on the static characteristics is well known, its influence on the dynamic characteristics is still not clearly understood. The present Note uses Lubrication's simplest model problems (the 1D slider) to qualitatively describe this effect. An analytic solution obtained for the parallel 1D slider depicts the variation of stiffness and damping with the excitation frequency and shows that this nonlinearity must be taken into account for squeeze number larger than 1. A convenient way of handling this nonlinearity in a dynamic system is described for an aerodynamic thrust bearing. To cite this article: M. Arghir, P. Matta, C. R. Mecanique 337 (2009).     

Study of the Human Body Vibrations for the Seated Vehicle Driver

The paper presents some aspects about the dynamic response of the human body subjected to the vertical vibration in the travel inside the auto vehicle. There is a model presented in the specialized literature. This is transformed for the given study because was necessary to realize the vertical vibration along the human body. There are two different studies: using a linear lumped parameter systems seat - human body model; using a nonlinear lumped parameter systems seat-human body model. (© 2006 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Regularity of Coupled Two-Dimensional Nonlinear Fokker-Planck and Navier-Stokes Systems

We consider systems of particles coupled with fluids. The particles are described by the evolution of their density, and the fluid is described by the Navier-Stokes equations. The particles add stress to the fluid and the fluid carries and deforms the particles. Because the particles perform rapid random motion, we assume that the density of particles is carried by a time average of the fluid velocity. The resulting coupled system is shown to have smooth solutions at all values of parameters, in two spatial dimensions.     

Development of a biomechanical model to study the horizontal vibration transmitted from shoulder to head

On daily activity a human operator is exposed to vibration in working environment. So, the human body will react in different way. The problem is how much from the initial signal will be sent to the other parts of the body and how much that motion will be damped along the studied parts. The vibrations in horizontal plane are some unexpected, so the human operator will not take any position to prevent them. In this condition the horizontal vibrations will have the higher effect possible. In this paper, the shoulder, neck and the head are modeled together like a mechanical system with four degree of freedom. (© 2011 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Hand Vibrations of the Human Operator in the Working Space

The paper contains the identification and the taking into account the vibrations produced by the machines, the lathe with different number of rotation, and them action over the human bodies inside the working space. For the identification of vibrations is applied a new method, the Moiré projection method, that did not used until this moment regarding the vibrations action over the human body. Our research was to apply the Moiré projection method to the human hand. They were compared with the measured vibrations using a classic vibrometer with three-axial accelerometer. The results in the booth situation were in the same order of the unit scale, and the optical method named Moiré projection method can be considered a valid method for the human vibrations measurements without touch of the surface. (© 2011 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

The Study of Psychoacoustic Effects of Noise Emitted by the Machine Tools Structure

The main sources of noise at work, in industrial environments, are machine tools: namely, mechanical transmission structure composed of gears, bearings, electric motors drive and the cutting process. Generated vibrations are transmitted through structures, carcasses or directly to environment, developing a complex acoustic field around machine tools. In terms of occupational medicine, the noise is generated by a combination of vibrations producing sounds with different characteristics and that are produced in the workplace [2]. It is important to identify the dominant noise source, the cause of exceeding the admissible limits (87dB) and noise transmission mode to make an objective correlation with effects on humans [1]. Hearing loss can occur immediately at extreme sound levels, but, in general, the problem is noise exposure over time. (© 2012 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Vibrations Action of the Trilling Machine MA750 on the Human Operator Hand

The Work includes identifying and analyzing vibrations produced by a trilling machine MA750 within space work. To identify vibration is used a special method, which has not been used so far in identifying vibrations, with the action on the human body. For obtaining a very good identification of the human body vibrations has been used the Moiré projection method. General conditions were applied to human hand operator during working hours on a trilling machine, with different speeds of main shaft. In the paper are presented successively two methods of measuring the vibrations: the Moiré projection method and conventional method of measuring the vibrometer. The results in the booth situation (classical measurements and Moiré projection method) were in the same order of the unit scale, and the optical method named Moiré projection method can be considered a valid method for the human vibrations measurements without touch of the surface. (© 2012 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)