Thermal studies for preparation of Nb10Hf1Ti Alloy

The aim of this work is to evaluate the feasibility of preparation of Nb10Hf1Ti alloy by magnesiothermic reduction of its oxides. DTA studies were conducted to identify the reduction temperature for co reduction of the mixed oxides of Nb₂O₅, HfO₂, and TiO₂ by magnesium under reducing atmosphere. Based on DTA analysis, experiments were carried out to prepare Nb10Hf1Ti alloy by magnesiothermic reduction of their oxides at 750 °C. The reduced product was analyzed for its phases by X-ray diffraction. The excess Mg was leached out, the alloy mixture was vacuum dried, pelletized, sintered, and electron beam melted to get a consolidated alloy of the required composition. The alloy was characterized using different techniques such as optical microscopy, scanning electron microscopy, and chemical analysis. Microstructural observations revealed the formation of coarse grain structure in the consolidated alloy. The alloy product was also evaluated for its micro hardness.     

A Resin‐Linker‐Vector Approach to Radiopharmaceuticals Containing 18F: Application in the Synthesis of O‐(2‐[18F]‐Fluoroethyl)‐L‐tyrosine

A Resin‐linker‐vector (RLV) strategy is described for the radiosynthesis of tracer molecules containing the radionuclide ¹⁸F, which releases the labelled vector into solution upon nucleophilic substitution of a polystyrene‐bound arylsulfonate linker with [¹⁸F]‐fluoride ion. Three model linker‐vector molecules 7 a – c containing different alkyl spacer groups were assembled in solution from (4‐chlorosulfonylphenyl)alkanoate esters, exploiting a lipase‐catalysed chemoselective carboxylic ester hydrolysis in the presence of the sulfonate ester as a key step. The linker‐vector systems were attached to aminomethyl polystyrene resin through amide bond formation to give RLVs 8 a – c with acetate, butyrate and hexanoate spacers, which were characterised by using magic‐angle spinning (MAS) NMR spectroscopy. On fluoridolysis, the RLVs 8 a , b containing the longer spacers were shown to be more effective in the release of the fluorinated model vector (4‐fluorobutyl)phenylcarbamic acid tert‐butyl ester ( 9 ) in NMR kinetic studies and gave superior radiochemical yields (RCY≈60 %) of the ¹⁸F‐labelled vector. The approach was applied to the synthesis of the radiopharmaceutical O‐(2‐[¹⁸F]‐fluoroethyl)‐L ‐tyrosine ([¹⁸F]‐FET), delivering protected [¹⁸F]‐FET in >90 % RCY. Acid deprotection gave [¹⁸F]‐FET in an overall RCY of 41 % from the RLV.     

Non-Direct Sequence Ions in the Tandem Mass Spectrometry of Protonated Peptide Amides—an Energy-Resolved Study

The fragmentation reactions of the MH⁺ ions of Leu-enkephalin amide and a variety of heptapeptide amides have been studied in detail as a function of collision energy using a QqToF beam type mass spectrometer. The initial fragmentation of the protonated amides involves primarily formation of b_n ions, including significant loss of NH₃ from the MH⁺ ions. Further fragmentation of these b_n ions occurs following macrocyclization/ring opening leading in many cases to b_n ions with permuted sequences and, thus, to formation of non-direct sequence ions. The importance of these non-direct sequence ions increases markedly with increasing collision energy, making peptide sequence determination difficult, if not impossible, at higher collision energies.

Improving human health through understanding the complex structure of glucose polymers

Two highly branched glucose polymers with similar structures—starch and glycogen—have important relations to human health. Slowly digestible and resistant starches have desirable health benefits, including the prevention and alleviation of metabolic diseases and prevention of colon cancer. Glycogen is important in regulating the use of glucose in the body, and diabetic subjects have an anomaly in their glycogen structure compared with that in healthy subjects. This paper reviews the biosynthesis–structure–property relations of these polymers, showing that polymer characterization produces knowledge which can be useful in producing healthier foods and new drug targets aimed at improving glucose storage in diabetic patients. Examples include mathematical modeling to design starch with better nutritional values, the effects of amylose fine structures on starch digestibility, the structure of slowly digested starch collected from in vitro and in vivo digestion, and the mechanism of the formation of glycogen α particles from β particles in healthy subjects. A new method to overcome a current problem in the structural characterization of these polymers using field-flow fractionation is also given, through a technique to calibrate evaporative light scattering detection with starch.

Dimerisation of Dipiperidinoacetylene: Convenient Access to Tetraamino-1,3-Cyclobutadiene and Tetraamino-1,2-Cyclobutadiene Metal Complexes

The reaction of 1,2-dipiperidinoacetylene ( 1 ) with 0.5 equivalents of SnCl₂ or GeCl₂⋅dioxane afforded the 1,2,3,4-tetrapiperidino-1,3-cyclobutadiene tin and germanium dichloride complexes 2 a and 2 b , respectively. A competing redox reaction was observed with excess amounts of SnCl₂, which produced a tetrapiperidinocyclobutadiene dication with two trichlorostannate(II) counterions. Heating neat 1 to 110 °C for 16 h cleanly produced the dimer 1,3,4,4-tetrapiperidino-3-buten-1-yne ( 3 ); its reaction with stoichiometric amounts of SnCl₂ or GeCl₂⋅dioxane furnished the 1,3,4,4-tetrapiperidino-1,2-cyclobutadiene tin and germanium dichloride complexes 4 a and 4 b , respectively. Transition-metal complexes containing this novel four-membered cyclic bent allene (CBA) ligand were prepared by reaction of 3 with [(tht)AuCl], [RhCl(CO)₂]₂, and [(Me₃N)W(CO)₅] to form [(CBA)AuCl] ( 5 ), [(CBA)RhCl(CO)₂] ( 6 ), and [(CBA)W(CO)₅] ( 7 ). The molecular structures of all compounds 2 – 7 were determined by X-ray diffraction analyses, and density functional theory (DFT) calculations were carried out to rationalise the formation of 3 and 4 a .     

Full Dissolution of the Whole Lithium Sulfide Family (Li2S8 to Li2S) in a Safe Eutectic Solvent for Rechargeable Lithium–Sulfur Batteries

The lithium–sulfur battery is an attractive option for next‐generation energy storage owing to its much higher theoretical energy density than state‐of‐the‐art lithium‐ion batteries. However, the massive volume changes of the sulfur cathode and the uncontrollable deposition of Li₂S₂/Li₂S significantly deteriorate cycling life and increase voltage polarization. To address these challenges, we develop an ?‐caprolactam/acetamide based eutectic‐solvent electrolyte, which can dissolve all lithium polysulfides and lithium sulfide (Li₂S₈–Li₂S). With this new electrolyte, high specific capacity (1360 mAh g^?1) and reasonable cycling stability are achieved. Moreover, in contrast to conventional ether electrolyte with a low flash point (ca. 2 °C), such low‐cost eutectic‐solvent‐based electrolyte is difficult to ignite, and thus can dramatically enhance battery safety. This research provides a new approach to improving lithium–sulfur batteries in aspects of both safety and performance.     

Globular Polymer Grafts Require a Critical Size for Efficient Molecular Sieving of Enzyme Substrates

A series of 2,2‐bis(hydroxymethyl)propionic acid dendrons of generation 2 through 8 having a strained cyclooctyne at the core and hydroxy groups at the periphery were prepared by a divergent method and used to functionalize azide‐decorated α‐chymotrypsin. The ability of the appended dendrons to selectively block enzyme activity (through a molecular sieving effect) was investigated using a small molecule substrate (benzoyl‐l ‐tyrosine p‐nitroanilide), as well as two proteins of different size (casein and bovine serum albumin). Additionally, the ability of dendrons to block complexation with a chymotrypsin antagonist, α‐antichymotrypsin, was investigated, and it was found that the dendron coating effectively prevented inhibition by this antagonist. We found that a critical generation is required to achieve efficient sieving with bis‐MPA dendrons, which illustrates the importance of macromolecular architecture and size in the shielding of proteins.     

Effect of the his residue on the cyclization of b ions

The MSⁿ spectra of the [M + H]⁺ and b ₅ peaks derived from the peptides HAAAAA, AHAAAA, AAHAAA, AAAHAA, and AAAAHA have been measured, as have the spectra of the b ₄ ions derived from the first four peptides. The MS² spectra of the [M + H]⁺ ions show a substantial series of b_n ions with enhanced cleavage at the amide bond C-terminal to His and substantial cleavage at the amide bond N-terminal to His (when there are at least two residues N-terminal to the His residue). There is compelling experimental and theoretical evidence for formation of nondirect sequence ions via cyclization/reopening chemistry in the CID spectra of the b tons when the His residue is near the C-terminus. The experimental evidence is less clear for ions when the His residue is near the N-terminus, although this may be due to the use of multiple alanine residues in the peptide making identifying scrambled peaks more difficult. The product ion mass spectra of the b ₄ and b ₅ ions from these isomeric peptides with cyclically permuted amino acid sequences are similar, but also show clear differences. This indicates less active cyclization/reopening followed by fragmentation of common structures for b _n ions containing His than for sequences of solely aliphatic residues. Despite more energetically favorable cyclization barriers for the b ₅ structures, the b ₄ ions experimental data show more clear evidence of cyclization and sequence scrambling before fragmentation. For both b ₄ and b ₅ the energetically most favored structure is a macrocyclic isomer protonated at the His side chain.     

High-throughput purification of combinatorial libraries I: a high-throughput purification system using an accelerated retention window approach

We have developed a high-throughput purification system to purify combinatorial libraries at a 50-100-mg scale with a throughput of 250 samples/instrument/day. We applied an accelerated retention window method to shorten the purification time and targeted one fraction per injection to simplify data tracking, lower QC workload, and simplify the postpurification processing. First, we determined the accurate retention time and peak height for all compounds using an eight-channel parallel LC/UV/MS system, and calculated the specific preparative HPLC conditions for individual compounds. The preparative HPLC conditions include the compound-specific gradient segment for individual compounds with a fixed gradient slope and the compound-specific UV or ELSD threshold for triggering a fraction collection device. A unique solvent composition or solvent strength was programmed for each compound in the preparative HPLC in order to elute all compounds at the same target time. Considering the possible deviation of the predicted retention time, a 1-min window around the target time was set to collect peaks above a threshold based on UV or ELSD detection. Dual column preparative instruments were used to maximize throughput. We have purified more than 500 000 druglike compounds using this system in the past 3 years. We report various components of this high-throughput purification system and some of our purification results.     

Orthogonal separations of nicotine and nicotine-related alkaloids by various capillary electrophoretic modes

The migration behaviour of nicotine and related tobacco alkaloids was investigated using three different capillary electrophoretic (CE) modes. Novel separations were achieved both using microemulsion electrokinetic chromatography (MEEKC) and nonaqueous CE (NACE). Improved resolution compared to previous studies was obtained using free-solution CE (FSCE). Each technique resulted in different, orthogonal separation selectivity. The suitability of each method for application to the analysis of nicotine lozenges is discussed. The FSCE method was applied to the analysis of nicotine lozenges due to its compatibility with an established lozenge extraction solvent. The method used gave good injection precision and linearity. Good agreement of CE and high-performance liquid chromatography (HPLC) results was obtained. The CE method is therefore considered suitable for the quantitative determination of nicotine in nicotine lozenges.