Viscosimetric Study of Some Cyclic Ethers with Benzene, Toluene, or Halobenzene

Experimental viscosities and the corresponding viscosity deviations for the binary mixtures of a cyclic ether (tetrahydrofuran, tetrahydropyran, 2-methyltetrahydrofuran, or 2,5-dimethyltetrahydrofuran) with benzene, toluene, fluorobenzene, or chlorobenzene are given at 25°C. The kinematic viscosities and the corresponding densities were measured with an uncertainty of ±10^{– 4} mm²-s^{– 1} and ±(5×10^{– 3}) kg-m^{– 3}, respectively. The viscosity data were correlated by the equations of Grunberg–Nissan, McAllister, and Heric. On the other hand, the results have been compared to the predictions, by the method proposed by Asfour.     

Effects of Alkylamines on the Percolation Phenomena in Water/AOT/Isooctane Microemulsions

We carried out an investigation on the influence of several alkylamines, frequently present in reactions carried out in microemulsions, on the properties of the water/AOT/isooctane system. The presence of alkylamines has an important effect on the electrical percolation phenomena. This effect of amines on the electrical percolation of microemulsions of AOT/isooctane/water can be explained by taking into account the ability of these substrates to associate with the AOT film in the microemulsion, the basicity of the amine, and the different solubility of the amine in the three pseudophases of the system. Copyright 2000 Academic Press.     

Total synthesis of everninomicin 13,384-1--Part 1: retrosynthetic analysis and synthesis of the A1B(A)C fragment

In this first of a series of four articles we introduce everninomicin 13,384-1 (1), a powerful antibiotic effective against drug resistant bacteria, as a target for total synthesis and discuss its retrosynthetic analysis. From the three defined fragments required for the synthesis (2: A1B(A)C fragment; 4: DE fragment; 5: FGHA2 fragment), we describe herein two approaches to the A1B(A)C block. The first strategy relied on an olefin metathesis reaction to construct a common intermediate for rings B and C, but was faced with final protecting group problems. The second, and successful approach, involved a 1,2-phenylsulfeno migration and a sulfur directed glycosidation procedure to link rings B and C, as well as an acyl fluoride intermediate to install the sterically hindered aryl ester moiety (ring A1). The final stages of the synthesis of the required 2-phenylseleno glycosyl fluoride 2 required introduction of a phenylseleno group at C-1 of ring C followed by a novel, DAST-promoted 1,2-migration to produce the desired 2-beta-phenylseleno glycosyl fluoride moiety.     

Biocatalytic removal of nickel and vanadium from petroporphyrins and asphaltenes

Asphaltenes from a crude oil rich in heavy metals (Castilla crude oil) were fractionated and partially characterized. Biocatalytic modifications of these fractionated asphaltenes by three different hemoproteins: chloro-peroxidase (CPO), cytochrome C peroxidase (Cit-C), and lignin peroxi-dase (LPO) were evaluated in both aqueous buffer and organic solvents. The reactions were carried out in aqueous buffers, ternary systems of toluene: isopropanol: water, and aqueous-miscible organic solvent solutions with petroporphyrins as substrate. The petroporphyrins were more soluble in the ternary systems and aqueous miscible-organic solvent systems than in the aqueous buffer systems. However, only the CPO-mediated reactions were effective in eliminating the Soret peak in both aqueous and organic solvent systems. The effects of CPO-mediated reactions on the release of the metals complexed with the porphyrins and asphaltenes were also determined. Chloroperoxidase was able to alter components in the heavy fractions of petroleum and remove 53 and 27% of total heavy metals (Ni and V, respectively) from petroporphyrin-rich fractions and asphaltenes     

Fractal Characterization of Silica Sol Prepared by the Sol-Gel Method: From the Sol Formation to the Flocculation Process

The fractal characterization of silica particles prepared by the sol-gel method was obtained; from the beginning of the sol-gel synthesis to the aggregation process of these particles by adding metal ions in solution, the fractal dimension was determined. At the beginning of the sol-gel process, unstable structures were formed due, essentially, to the auto-catalytic nature of the sol-gel condensation reactions; these particles are fractal structures with a fractal exponent corresponding to a reaction limited aggregation regime. As the time proceeds, the reactants are consumed approaching the system to equilibrium, stabilizing the size of the silica particles. The silica sol can be flocculated by adding metal ions in solution. The fractal exponent for the aggregation process was determined, obtaining a value corresponding to a diffusion limited aggregation regime.     

On the liquid-crystalline properties of methacrylic polymers containing 4′-(4-alkyloxyphenyl)azobenzene mesogens

In this article, we report on the synthesis and thermotropic behaviour of methacrylic polymers containing 4′-(4-alkyloxyphenyl)azobenzene mesogens attached to the backbone through n-alkyloxy spacers of 6 or 10 methylene groups. Polymerisations were carried out via free radicals using azobisisobutyronitrile (AIBN) as initiator. Chemical structures of polymers and their precursors were characterised by ¹H NMR spectroscopy. Thermogravimetric analysis showed that azopolymers are thermally stable up to temperatures around 300°C. The thermotropic liquid-crystalline (LC) behaviour was studied by differential scanning calorimetry (DSC), polarized optical microscopy (POM) and X-ray diffraction (XRD). Results indicate that all synthesised mesogens, monomers and polymers developed two or more orthogonal LC phases in wide temperature ranges. Mesogens and monomers developed nematic and smectic phases, whereas polymers exhibited only smectic phase. In polymers, the arrangement of mesogens depends on the relative length of the spacer and the terminal flexible chain; two distinct structural models were proposed based on chemical interactions and steric constrains. The trans–cis photoisomerisation of monomers and polymers in solution was also studied. High cis-isomer contents (>80%) were reached in relative short irradiation times despite the steric constrains imposed by the polymer backbone.     

Fracture Characterization of Steels by Means of the Small Punch Test

A hot rolled API X-70 steel plate and its heat-affected zone (the region with the maximum hardness and lowest toughness of the welded joint made using this steel) were employed to obtain the material’s room temperature elasto-plastic fracture toughness, J_Ic, by means of small punch tests (SPTs) using both conventional un-notched samples and longitudinally-notched SPT specimens. In the latter case, the notches were manufactured by micromachining different notch depth-to-thickness ratios (a/t?=?0.3 and 0.4). The representative toughness parameter used with the conventional SPT tests was the maximum strain measured directly in the failed region, while in the case of the notched samples, the consumed energy until the initiation of a crack from the tip of the notch was considered the most useful parameter of choice. The onset of crack initiation was determined directly from the load-displacement plot of each test with the aid of scanning electron microscope observations performed on different samples over which interrupted tests had been conducted. These tests were interrupted at different percentages of the maximum registered load. A simple correlation between the energy consumed until the initiation of crack growth in the notched SPT sample and the critical J value obtained using standard tests (J-R curves) was determined, defining an easy and promising way to derive fracture toughness from miniature SPT tests.     

Insight into industrial PLA aging process by complementary use of rheology,HPLC, and MALDI

Nowadays, there is a growing availability of biodegradable industrial materials intended to food contact applications whose service life behavior needs to be further investigated. This article is focused on the degradation of two materials based on polylactic acid. The correlation between the rate of degradation and the amount of trapped degradation products was investigated applying three characterization techniques in parallel, namely rheology, high‐performance liquid chromatography (HPLC), and matrix‐assisted laser desorption/ionization (MALDI). The rate of degradation was studied through the evaluation of their rheological properties and calculation of the number of average molecular weights, and weight‐average molecular weights. Water‐soluble oligomers and lactic acid were quantified by HPLC‐ultraviolet. Changes in cyclic and linear oligomers were monitored by MALDI‐time‐of‐flight mass spectrometry. Specimens of 4‐mm thickness of each biopolymer were subjected to hydrolysis in deionized water up to 6 months at two temperatures, simulating service conditions of food packaging. The diminution in viscosity and consequently in molecular weight distribution (20–60%) showed the degradation of the molecular structure of both polylactic acids. The chain scission was followed through the increasing values of lactic acid and hydrolyzed oligomers (twofold to eightfold), and the predominant signal of the linear oligomers over the cyclic ones with aging. Rheology, HPLC, and MALDI showed to be complementary tools to better understand the changes in the molecular structure. The obtained results showed the necessity of adding suitable stabilizers for each particular food packaging application. Copyright © 2013 John Wiley & Sons, Ltd.