FT-IR and Raman spectroscopic study of hydrated rubidium (cesium) borates and alkali double borates

FT-IR and Raman spectra of five hydrated alkali borates and five hydrated alkali double borates have been recorded at room temperature in the range 400 to 4000 cm⁻¹, and analyzed. Fundamental vibrational modes have been identified and assignments tentatively made in comparison with the work of Janda and Heller, and Li Jun. The text was submitted by the authors in English.     

Preparation of solutions of amidomagnesium chlorides in poly(ethylene oxide) and their characterization by conductivity measurements

Polymer electrolyte systems were prepared for the first time by dissolution of amidomagnesium chlorides in poly(ethylene oxide), (PEO). For the preparation, solutions of (hexamethyldisilylamido)magnesium chloride, (dimethylpyrrolyl)magnesium chloride, (diisopropylamido)magnesium chloride, piperidinomagnesium chloride and morpholinomagnesium chloride were chosen. The composition of these polymer electrolyte systems corresponds to the general formula R₂NMgCl·P(EO)_n·THF. Most work has been done with the system (hexamethyldisilylamido)magnesium chloride in PEO, (Me₃Si)₂NMgCl·P(EO)_n·THF, with n= 3, 4, 5, or 7. The electrolytes have a soft rubber-like consistency. At 30 °C, electrical conductivities of 10⁻⁶–10⁻⁵ S/cm were found. The conductivities were measured in the temperature range 20–60 °C. Within this temperature range a linear dependence of the logarithms of the conductivity on the inverse temperature was found and activation energies for the conducting process of 30–60 kJ/mol were calculated. Using those polymer electrolytes with a high content of the amidomagnesium compound, a reversible magnesium deposition takes place by cathodic reduction at potentials below −1.9 V vs. a Ag/AgCl reference electrode. These polymer electrolytes were found to be stable against oxidation up to about −0.3 V vs. Ag/AgCl. Electronic Publication     

Mixed micellization of an anionic gemini surfactant (GA) with conventional polyethoxylated nonionic surfactants in brine solution at pH 5 and 298 K

The micellization behavior of an anionic gemini surfactant, GA with nonionic surfactants C₁₂E₈ and C₁₂E₅ in presence of 0.1 M NaCl at 298 K temperature, has been studied tensiometrically in pure and mixed states, and the related physicochemical parameters (cmc, γ _cmc, pC ₂₀, Γ _max, and A _min) have been evaluated. Tensiometric profile (γ vs log [surfactant]), for conventional surfactants, generally consists of a single point of intersection; a gradually decreasing line (normally linear, or with slight curvature) ultimately saturates in γ at a particular [surfactant], corresponding to complete monolayer saturation. The gemini, in this report, led to two unequivocal breaks in the tensiometric isotherm. An attempt to the interpretation of the two breaks from molecular point of view is provided, depending solely on the chemical structure of the surfactant. The gemini, even in mixed state with the conventional nonionic surfactants C₁₂E₅ and C₁₂E₈, manifested the dual breaks; of course, the dominance of the feature decreases with increasing mole fraction of the nonionics in the mixture. Theories of Clint, Rosen, Rubingh, Motomura, Georgiev, Maeda, and Nagarajan have been used to determine the interaction between surfactants at the interface and micellar state of aggregation, the composition of the aggregates, the theoretical cmc in pure and mixed states, and the structural parameters according to Tanford and Israelachvili. Several thermodynamic parameters have also been predicted from those theories.     

Surface Modification of Fine Particles with a SnO<Subscript>2</Subscript> Film by Using a Polyhedral-Barrel Sputtering System

Fine particles were modified with a thin film of SnO₂ by using a barrel sputtering system that is a dry process. The conditions for the preparation of SnO₂ were studied by reactive sputtering onto a glass plate substrate. The optimal conditions for the preparation of tetragonal SnO₂ were identified as 60% partial oxygen pressure and 1.0 Pa total gas pressure with the substrate at room temperature. Under the optimized conditions, the surfaces of Al flake particles were modified with a thin film of SnO₂. XRD and SEM/EDS analysis of the prepared samples showed that the Al particle surfaces were uniformly modified by a thin film of SnO₂ in all cases. The film thicknesses were 80, 130, and 180 nm at RF outputs of 195, 350, and 490 W. These measured thicknesses coincided with the values estimated from the interference colors of the samples.     

Synthesis and aggregation behavior of <Emphasis Type="Italic">N</Emphasis>-succinyl-o-carboxymethylchitosan in aqueous solutions

A simple and novel method was developed to successfully synthesize N-succinyl-O-carboxymethylchitosan (NSOCMCS) using N-acylation of chitosan with succinic anhydride. The NSOCMCS structure was characterized by Fourier transform infrared and ¹H nuclear magnetic resonance. The aggregation behaviors of NSOCMCS were studied using fluorescence spectroscopy, dynamic light scattering, and atomic force microscopy techniques. The critical aggregation concentration of NSOCMCS in water was determined to be 0.2–0.3 mg/ml. The apparent hydrodynamic radium of an NSOCMCS aggregate was dependent on the concentration. The aggregates demonstrated a much swollen association conformation in aqueous solution. The possible aggregation mechanisms for the NSOCMCS in water are discussed. Moreover, a driving force to form an open aggregation morphology was revealed in this study. Aggregation behaviors are important physicochemical properties of NSOCMCS, which impact the potential application in the biomedical field.     

Development of the FTIR properties of nano-structure silica gel doped with different rare earth elements,prepared by sol-gel route

Structural characteristics of pure silica gel (silica-xerogel, SiO₂) and silica gel doped with some rare earth elements (REEs) such as, praseodymium Pr³⁺, and Europium Eu³⁺, Erbium Er³⁺ and Holmium Ho³⁺ ions, with different concentrations ranging from 1 up to 6%, in the form of monolith materials were prepared by sol-gel technique, Using tetra-ethoxysilane as precursor materials, which are of particular interest for sol-gel integrated optics applications. Some structural features of sol-gel derived monolith are analyzed, namely the structure of nano-particle momolith samples, based on X-ray diffraction (XRD) and Fourier Transform Infrared (FTIR). We show that the XRD spectra of α-crystobalite are obtained for the pure samples at 1100°C and even by doping with the four REEs ions.     

Phase separation in the formation of hollow particles by suspension polymerization for divinylbenzene/toluene droplets dissolving polystyrene

Phase-separation behavior within polymerizing divinylbenzene/toluene droplet dissolving polystyrenes (PS) was investigated to clarify the formation mechanism of the hollow polymer particles by suspension polymerization. No hollow particles were obtained at a low content of low-molecular-weight PS where phase separation occurred at high conversion. On the other hand, hollow particles were obtained at a high content of high-molecular-weight PS where phase separation occurred at low conversion. The phase separation in an early stage of the polymerization, which was promoted by the presence of PS and cross-links of polydivinylbenzene, was a key factor for the formation of the hollow structure.     

Ab initio studies on polymers. VI. Torsional potential in regular polyethylene chains

Ab initio crystal orbital calculations have been performed on regular polyethylene chains applying basis sets of minimal and double-zeta quality. Relative stabilities of periodic all-trans, all-gauche, and alternating trans–gauche conformers have been evaluated, including extensive geometry optimization. Potential curves for a simultaneous rotation around C? C single bonds from the all-trans to the all-gauche conformation have been computed applying the rigid-rotor approximation, the flexible-rotor approximation, and an additional reoptimization of C? C distances. A rigid-rotor potential curve from the all-trans to the alternating trans-gauche conformation has been computed as well. Results obtained are compared with ab initio calculations on butane and pentane and with semiempirical and empirical force-field studies on polyethylene.     

Synthesis and Investigation of Indium Dodecatungstosilicate

Indium dodecatungstosilicate of the composition [In(OH)⋅5H₂O]₂ [SiW₁₂O₄₀]⋅H₂O is synthesized and studied by means of IR spectroscopy, thermogravimetry, and X-ray phase analysis. The crystals of this compound are triclinic, space group P1, a 13.079(3), b 13.795(3), c 13.967(3) Å, α 90.08(3)°, β 103.76(3)°, ψ107.76(3)°, Z 2, and π_calc 4.900 g cm⁻³.__________Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 1, 2005, pp. 21–23.Original Russian Text Copyright © 2005 by Kaziev, Dutov, Quinones, Ita, Sychkin.     

Modeling the reaction mechanisms for redox regulation of protein tyrosine phosphatase 1B activity

Protein tyrosine phosphatase 1B (PTP1B) functions by removing the phosphoryl group from tyrosinephosphorylated proteins in insulin signaling and metabolism. The regeneration of the active site involves a sulphenylamide intermediate derived from the intrastrand cross-linking between the catalytic serine and the neighboring backbone nitrogen. Two mechanisms have been proposed for the formation of the sulphenylamide intermediate and the subsequent reactivation of the catalytic site. In the current work, the proposed mechanisms have been investigated by the use of density functional theory calculations. Our results suggest that these two mechanisms have similar overall energy barriers and that the preferred route will be determined by the availability of hydrogen peroxide or other oxidizing reagents.