Trapping Nanostructures on Surfaces through Weak Interactions

The assembly of imidazole‐functionalized phenanthroline‐strapped zinc porphyrins (ZnPorphen) with alkyl or polyethylene glycol (PEG) side chains was studied in solution and by AFM after casting on highly oriented pyrolytic graphite (HOPG) or mica. The nature of the solvent and its evaporation time influenced the morphology of the objects observed. On HOPG, short rods of about 100 nm were observed after fast evaporation of solutions of the alkyl derivatives in CHCl₃, THF, or pyridine, whereas islands of aligned rows of longer wires were obtained from methylcyclohexane (MCH). Slow evaporation of MCH led to a three‐dimensional assembly. The PEG porphyrin assembled into short wires on HOPG or fibers on mica after slow evaporation of solutions in THF. This study shows the role of surface–molecule interactions in the interfacial assembly of ZnPorphen derivatives and contributes to understanding the parameters that control their noncovalent assembly into molecular wires on a surface.     

UV-induced bursting of cell-sized multicomponent lipid vesicles in a photosensitive surfactant solution

We study the behavior of multicomponent giant unilamellar vesicles (GUVs) in the presence of AzoTAB, a photosensitive surfactant. GUVs are made of an equimolar ratio of dioleoylphosphatidylcholine (DOPC) and dipalmitoylphosphatidylcholine (DPPC) and various amounts of cholesterol (Chol), where the lipid membrane shows a phase separation into a DPPC-rich liquid-ordered (L(o)) phase and a DOPC-rich liquid-disordered (L(d)) phase. We find that UV illumination at 365 nm for 1 s induces the bursting of a significant fraction of the GUV population. The percentage of UV-induced disrupted vesicles, called bursting rate (Y(burst)), increases with an increase in [AzoTAB] and depends on [Chol] in a non-monotonous manner. Y(burst) decreases when [Chol] increases from 0 to 10 mol % and then increases with a further increase in [Chol], which can be correlated with the phase composition of the membrane. We show that Y(burst) increases with the appearance of solid domains ([Chol] = 0) or with an increase in area fraction of L(o) phase (with increasing [Chol] ≥ 10 mol %). Under our conditions (UV illumination at 365 nm for 1 s), maximal bursting efficiency (Y(burst) = 53%) is obtained for [AzoTAB] = 1 mM and [Chol] = 40 mol %. Finally, by restricting the illumination area, we demonstrate the first selective UV-induced bursting of individual target GUVs. These results show a new method to probe biomembrane mechanical properties using light as well as pave the way for novel strategies of light-induced drug delivery.     

Heterometallic coordination polymers incorporating dipyrrin based heteroleptic copper and cobalt complexes: to Ag-π or not?

Using ligands based on either an acetylacetonate or a dipyrrin moiety appended with pyridyl groups, a series of novel heteroleptic copper(II) and cobalt(III) complexes combining both chelate units such as (acacpy(2))Cu(dpm-py) and (acacpy(2))Co(dpm-py)(2) (acacpy(2) = 1,3-bis(4-pyridyl)-1,3-propanedionate; dpm-py = 5-(4-pyridyl)dipyrrin) have been prepared and fully characterized. These two complexes were obtained upon reaction of dpm-py with the (acacpy(2))M homoleptic species (M = Cu(II), Co(II)). In the solid state, the (acacpy(2))Cu(dpm-py) complex behaves as a self-complementary metallatecton and leads to the formation of a 1D coordination polymer (CP) through the coordination of a peripheral pyridyl group to the copper centre. Contrastingly, the octahedral (acacpy(2))Co(dpm-py)(2) complex featuring a coordinatively saturated Co(III) centre crystallizes as an isolated mononuclear species. In order to generate heterometallic CPs, both complexes have been used as metallatectons upon their combination with different silver(I) salts. Upon reaction of (acacpy(2))Cu(dpm-py) with Ag(BF(4)) or Ag(TfO), 2- and 3-D heterometallic networks were obtained, respectively. In both cases, sheet type arrangements resulting from the binding of Ag(+) cations by three peripheral pyridyl groups were observed. These 2D sheets are further interconnected through Ag-π interactions with the pyrrolic rings. Under the same conditions, the combination of (acacpy(2))Co(dpm-py)(2) with Ag(TfO) leads to two networks differing by their connectivity patterns and dimensionality. Interestingly, whereas no Ag-π interactions were observed for the 2D network, a combination of coordination bonding with the pyridyl moieties and Ag-π interactions was detected for the 1D architecture.     

Synthesis, ionisation potentials and electron affinities of hexaazatrinaphthylene derivatives

Several hexaazatrinaphthylene derivatives and a tris(thieno)hexaazatriphenylene derivative have been synthesised by reaction of the appropriate diamines with hexaketocyclohexane. The crystal structure of 2,3,8,9,14,15-hexachloro-5,6,11,12,17,18-hexaazatrinaphthylene has been determined by X-ray diffraction; this reveals a molecular structure in good agreement with that predicted by density functional theory (DFT) calculations and pi-stacking with an average spacing between adjacent molecular planes of 3.18 A. Solid-state ionisation potentials have been measured by using UV photoelectron spectroscopy and fall in the range of 5.99 to 7.76 eV, whereas solid-state electron affinities, measured using inverse photoelectron spectroscopy, vary in the range -2.65 to -4.59 eV. The most easily reduced example is a tris(thieno)hexaazatriphenylene substituted with bis(trifluoromethyl)phenyl groups; DFT calculations suggest that the highly exothermic electron affinity is due both to the replacement of the outermost phenylene rings of hexaazatrinaphthylene with thieno groups and to the presence of electron-withdrawing bis(trifluoromethyl)phenyl groups. The rather exothermic electron affinities, the potential for adopting pi-stacked structures and the low intramolecular reorganisation energies obtained by DFT calculations suggest that some of these molecules may be useful electron-transport materials.     

Chemical biology of salinomycin

Cancer stem cells (CSC) have been shown to be refractory to conventional therapeutic agents, can promote metastasis, and have been linked to cancer relapse. The natural product Salinomycin has been identified by means of high throughput phenotypic screening as a selective killer of CSC in vitro and in vivo. In this article we comprehensively review the chemistry of Salinomycin, documenting early total syntheses, along with strategies that have been developed over the years to effectively modify this natural product at key positions with the view to establish a robust structure-activity-relationship and to delineate the complex mechanism of action of this fascinating molecule in the context of cancer research. Then, we document the biology of Salinomycin, putting forward phenotypic alterations that have been observed in the relevant biological models and highlighting how chemistry has been instrumental in discovering unprecedented physiological features of cancer stem cells that can be exploited for therapeutic benefits.     

Reversible Silylene Insertion Reactions into Si−H and P−H σ‐Bonds at Room Temperature

Phosphine‐stabilized silylenes react with silanes and a phosphine by silylene insertion into E?H σ‐bonds (E=Si,P) at room temperature to give the corresponding silanes. Of special interest, the process occurs reversibly at room temperature. These results demonstrate that both the oxidative addition (typical reaction for transient silylenes) and the reductive elimination processes can proceed at the silicon center under mild reaction conditions. DFT calculations provide insight into the importance of the coordination of the silicon center to achieve the reductive elimination step.     

Combining alkali metals and zinc to harness heterometallic cooperativity in cyclic ester ring-opening polymerisation

Heterometallic cooperativity is an emerging strategy to elevate polymerisation catalyst performance. Here, we report the first heterotrimetallic Na/Zn₂ and K/Zn₂ complexes supported by a ProPhenol ligand, which deliver “best of both” in cyclic ester ring-opening polymerisation, combining the outstanding activity (Na/K) and good control (Zn₂) of homometallic analogues. Detailed NMR studies and density-functional theory calculations suggest that the Na/Zn₂ and K/Zn₂ complexes retain their heterometallic structures in the solution-state. To the best of our knowledge, the K/Zn₂ analogue is the most active heterometallic catalyst reported for rac-lactide polymerisation (k_obs = 1.7 × 10⁻² s⁻¹), giving activities five times faster than the Na/Zn₂ complex. These versatile catalysts also display outstanding performance in ε-caprolatone and δ-valerolactone ring-opening polymerisation. These studies provide underpinning methodologies for future heterometallic polymerisation catalyst design, both in cyclic ester polymerisation and other ring-opening (co)polymerisation reactions.

Cooperative heterotrimetallic Na/Zn₂ and K/Zn₂ complexes combine the excellent activities and control of the homometallic analogues, giving “best of both” in cyclic ester ring-opening polymerisation.     

Surface Modification of Smectite Clay Induced by Non-thermal Gliding Arc Plasma at Atmospheric Pressure

Smectite clay from Sabga (west-Cameroon) was treated in aqueous suspension by gliding arc plasma to modify its surface properties. The evolution of the modifications was followed with the exposure time and post-discharge duration using Fourier transformed infra red spectroscopy and scanning electron microscopy. X-ray diffraction and nitrogen physisorption analyses were also performed to evaluate if both crystalline and textural properties of the material are affected by the treatment. The results obtained show that the plasma treatment causes the breakdown of structural bounds at the clay surface and induces the formation of new hydroxyl groups (Si–OH and Al–OH) on the clay edges. Crystallinity, sheet structure and textural properties are not significantly affected by the plasma treatment. However, it should be noted that an intensive treatment of the clay lowers the pH of the suspension, which subsequently induces an acid attack of the clay. In such case, the specific surface area of the clay increases. This study demonstrates that gliding arc plasma treatments can be used to activate clay minerals for environmental application.