Mo (CO)6‐assisted Pd‐supported magnetic graphene oxide‐catalyzed carbonylation‐cyclization as an efficient way for the synthesis of 4(3H)‐quinazolinones

In this paper, a novel catalyst is introduced based on the immobilization of palladium on modified magnetic graphene oxide nanoparticles. The catalyst is characterized by several methods, including transmission electron microscopy, scanning electron microscopy, X‐ray fluorescence, vibrating‐sample magnetometer, Fourier transform‐infrared and dynamic light scattering (DLS) analysis. The activity of the catalyst was investigated in the synthesis of 4(3H)‐quinazolinones via Pd‐catalyzed carbonylation‐cyclization of N‐(2‐bromoaryl) benzimidamides by Mo (CO)₆. The Mo (CO)₆ is used as a carbon monoxide source for performing the reaction under mild conditions. The catalyst showed good reusability, and no change in activity was observed after 10 cycles of recovery.     

Intense Upconversion Luminescence of Yb<Superscript>3+</Superscript>-Er<Superscript>3+</Superscript> in Li<Subscript>2</Subscript>O Content Tungsten-tellurite Glasses

The Er³⁺ -Yb³⁺ codoped in Li₂O content tungsten -tellurite (TWL) transparent glasses are synthesized and measured the absorption, Raman and upconversion luminescence (UPL) spectra. At room temperature intense green emission peak at 560 nm ( ⁴S_3/2→⁴I_15/2) and red emission peak at 670 nm ( ⁴F_9/2→⁴I_15/2) of Er³⁺ observed even at minimum 86 mW pumping power of infrared 980 nm excitation. For structure of the TWL glass, Raman spectrum result revealed that an important role of WO₃ in the formation of glass network linkage with Li₂O. Under this influence estimated lifetime of the ⁴I_11/2 of Er³⁺ was 1.89 μs and due to lower phonon energy of the glass produce strong upconversion signal. The effect of Er₂O₃ concentration on emission intensity result indicated that green emission intensity initially increase in compare to red emission. Under the 980 nm pump power variation measured the relatively increases the red emission to the green emission intensity and analyze the possible upconversion mechanism and process.     

A theorem on asymptotic behaviour of functional equations and its applications

A method for the determination of rate of decay of a solution of a stable functional equation is discussed. A method for establishing a bound on an unstable, but bounded, solution is also discussed. Some applications are considered as examples.     

Optical absorption and NMR spectroscopic studies on paramagnetic trivalent lanthanide complexes with 2,2'-bipyridine.; The solvent effect on 4f-4f hypersensitive transitions

The optical absorption and NMR studies of trivalent lanthanide chloride complexes with 2,2'-bipyridine (bpy) are presented and discussed. The NMR spectra of paramagnetic complexes exhibit lower as well as higher field shifts of bpy resonances that reflect change in geometry and reveals importance of the factor (3 cos2 theta - 1 ) in changing sign of the shift. The paramagnetic shifts recorded have been analyzed and the intramolecular shift ratios suggest that the paramagnetic shift is predominantly dipolar in origin. Electronic spectral studies of the Pr, Nd, Ho, Er and Dy complexes in different solvents (viz. methanol, pyridine, DMSO and DMF), which differ with respect to donor atoms, reveal that the chemical environment around the lanthanide ion has great impact on f-f transitions and any change in the environment results in modifications of the spectra. The oscillator strength for the hypersensitive and non-hypersensitive transitions have been determined and changes in the oscillator strength and band shape with respect to solvent type is rationalized in terms of ligand (solvent) structure and coordination properties.     

A comparative study of first-derivative spectrophotometry and high-performance liquid chromatography applied to the determination of losartan potassium in tablets

Losartan, a highly effective blood pressure-lowering agent, has been widely used for the treatment of hypertension. A fast and reliable method for the determination of losartan was highly desirable to support formulation screening and quality control. A first-derivative UV spectroscopic method and HPLC were developed for the determination of losartan in the tablet dosage form. The first-derivative spectrum recorded between 220 and 320 nm and a zero-crossing technique for first-derivative measurement at 232.5 nm were selected. The selectivity and sensitivity of the method was in desirable range. In comparison with the direct UV method, first-derivative UV spectroscopy has a definite trough without any interference from UV absorbing-excipients. This method is also fast and economical in comparison with the more time-consuming HPLC method regularly used for formulation screening and quality control and can be used routinely by any laboratory possessing a spectrophotometer with a derivative accessory. The linear concentration ranges were 2-50 microg ml(-1), (D(1)=-0.0159C-0.0056, r=0.9994, n=6). Between-days CV of < or =2.9%, within-day CV of < or =2.1%, and analytical recovery close to 98.1% show the suitability of the method for determination in quality control.     

A semi-classical approach to two-frequency solitons in a three-level cascade atomic system

A semi-classical theory of two intense optical fields interacting with a third-order non-linear medium composed of a three-level cascade atomic system is presented. It is predicted that non-linear atom-field interactions allow the formation of two-frequency bright, dark and grey spatial solitons. We demonstrate through numerical simulations and analytic stability analysis that the bright and grey solitons are stable.     

Direct analysis of solid samples by GFAAS – determination of trace heavy metals in barytes

Solid sampling graphite furnace atomic absorption spectroscopy (SS-GFAAS) has been used for the determination of traces of heavy metals (Cd, Pb, Cu, Cr, Ni, V and As) in barytes over a wide concentration range, e.g. Cd from 0.023 to 27.0 μg/g and Pb from 1.54 to 3509 μg/g.The necessity of determining heavy metals in commercial barytes (naturally occurring barium sulfate), a mineral important to the oil industry because of its use in drilling muds, is discussed. The problems presented by the analysis of this difficult matrix are elegantly solved by using SS-GFAAS for the direct determination of heavy metals. A high-performance graphite furnace AAS with D₂-background correction system and a transversely heated graphite atomizer was used for the investigations. The spectrometer was combined with a mechanical sampling module and an ultramicrobalance. The transfer of solid samples (sample weights 0.031–0.686 mg) into the atomizer was carried out by using an optimized graphite platform as the sample carrier. Calibration curve techniques and standard addition methods were employed using external standards (CRMs). Problems associated with signal deformations like multiple peaks, tailing or shoulders are also discussed and possibilities to solve the problems are given. The influence of the homogeneity of solid samples on the precision and accuracy are shown in a real example. The results obtained by SS-GFAAS were compared with results by other methods like X-ray fluorescence spectroscopy (XRF) and flame AAS after aqua regia microwave extraction. This study has demonstrated that SS-GFAAS is a very powerful and easy-to-use method for quick and accurate analysis of barytes. Received: 9 November 1998 / Revised: 29 January 1999 / Accepted: 2 February 1999     

Recent strategies in the synthesis of thiophene derivatives: highlights from the 2012–2020 literature

Molecular Diversity - Thiophene-based analogs have been fascinated by a growing number of scientists as a potential class of biologically active compounds. Furthermore, they play a vital role for...     

Comparison of Air-Assisted,Vortex-Assisted and Ultrasound-Assisted Dispersive Liquid–Liquid Microextraction for the Determination of BTEX Compounds in Water Samples Prior to GC-FID Analysis

Three new dispersive liquid–liquid microextraction (DLLME) methods, air-assisted (AA-DLLME), vortex-assisted (VA-DLLME) and ultrasound-assisted (UA-DLLME), were compared from the point of view of their analytical application for preconcentration of trace amounts of benzene, toluene, ethylbenzene and xylene isomers (BTEX) in water samples. In all of these methods, no dispersive solvent is required and dispersion of extractant is carried out by air bubbles, vortex and ultrasound for AA-DLLEM, VA-DLLME, and UA-DLLME, respectively. Advantages and disadvantages of these three liquid phase microextraction methods and their capability in dispersion of a similar extractant phase in sample solutions were comprehensively compared. All other extraction parameters, which have an influence on the microextraction, were also investigated and optimized. Under optimized conditions, analytical figures of merit for the three techniques were determined and compared. It was found that the limit of detection of the three methods is almost the same, while AA-DLLME has a wider linear dynamic range and the shortest analysis time. Enrichment factors of 182, 45 and 245 were achieved for AA-DLLEM, VA-DLLME, and UA-DLLME, respectively.