Reactivity studies,structural characterization,and thermolysis of cubic titanosiloxanes: precursors to titanosilicate materials which catalyze olefin epoxidation

The cubic titanosiloxane [RSiO(3)Ti(OPr(i))](4) (R = 2,6-Pr(2)(i)C(6)H(3)NSiMe(3)) (1) is found to be relatively inert in its attempted reactions with alcohols and other acidic hydrogen containing compounds. The reaction of 1 with silanol (Bu(t)O)(3)SiOH however proceeds over a period of approximately 3 months to result in the hydrolysis of (Bu(t)O)(3)SiOH and yield the transesterification product [RSiO(3)Ti(OBu(t))](4) (2) rather than the expected [RSiO(3)Ti(OSi(OBu(t))(3))](4). Products 1 and 2 have been characterized by elemental analysis, thermal analysis, and spectroscopic techniques (IR, EI-MS, and NMR). The solid-state structures of both 1 and 2 have been determined by single-crystal X-ray diffraction studies. Compounds 1 and 2 are isomorphous and crystallize in a cubic space group with a central cubic Ti(4)Si(4)O(12) core. Solid state thermolysis of 1 was carried at 450, 600, 800, 900, 1000, and 1200 degrees C in air, and the resulting titanosilicate materials 1a-f were characterized by spectroscopic (IR and DR UV), powder XRD, and electron microscopic methods. While, the presence of Ti-O-Si linkages appears to be dominant in the samples prepared at lower temperatures (450-800 degrees C), phase separation of anatase and rutile forms of TiO(2) occurs at temperatures above 900 degrees C as revealed by IR spectral and PXRD studies. The presence of octahedral titanium centers was observed by DR UV spectroscopy for the samples heated at higher temperatures. The use of new titanosilicate materials as catalysts for olefin epoxidation has been investigated. The titanosilicate materials produced at temperatures below 800 degrees C with a large number of Ti-O-Si linkages (or tetrahedral titanium centers) were found to be more active catalysts compared to the materials produced above 900 degrees C. The observed conversion in the epoxidation reactions was found to be somewhat low although the selectivity of the epoxide formation over the other possible oxidized products was found to be very good.     

Acoustic wave detection of chemical species electrokinetically transported within a capillary tube

For the first time, we report the acoustic wave detection of chemical species being transported in a capillary tube to a region where acoustic coupling occurs. The measured parameter was a change in phase, which was originally only attributed to a change in solution density as the analyte passed by the detection region. Accordingly, we report the detection of change in phase as various chemical species (e.g. Cy5 dye, Cy5-derivatized glycine and underivatized glycine) were introduced into and migrated along a capillary tube through electrokinetic processes. To improve detection sensitivity, we modified various experimental parameters, such as run buffer concentration, capillary wall thickness and transducer frequency. Although acoustic wave detection was feasible, the peak width and detection limit were inadequate as compared to conventional detection methods for HPLC or CE. Nevertheless, the effects of various physical and chemical relaxation processes on acoustic wave absorption were discussed, and this has shed some light on explaining some observations, which cannot be explained by density differences alone. Accordingly, the acoustic wave method is suggested to investigate these processes, as studied in ultrasonic relaxation spectroscopy, in a flow system.     

CCR5 antagonists: 3-(pyrrolidin-1-yl)propionic acid analogues with potent anti-HIV activity

[reaction: see text] A novel approach to alpha,alpha-disubstituted-beta-amino acids (beta(2,2)-amino acids) was employed in the synthesis of a series of 3-(pyrrolidin-1-yl)propionic acids possessing high affinity for the CCR5 receptor and potent anti-HIV activity. The rat pharmacokinetics for these new analogues featured higher bioavailabilities and lower rates of clearance as compared to cyclopentane 1.     

Molecular recognition for stable organic radicals--2-(6-uradinyl)-4,4,5,5-tetramethyl-4,5-dihydro-1H-imidazole-1-oxyl

Stable radical 2-(6-uradinyl)-4,4,5,5-tetramethyl-4,5-dihydro-1H-imidazole-1-oxyl shows antiferromagnetic spin pairing with 2J/k= -14 K, attributable to a close contact between unpaired spin density on the imidazole-type nitrogen atoms; hydrogen bonds aid dimer formation, but do not appear to play an eletronic role in the magnetic behaviour.     

The 'Trinity' helix: synthesis and structural characterisation of a C3-symmetric tris-bidentate ligand and its coordination to Ag(I)

The synthesis and structural characterisation of a novel C3-symmetric tris-bidentate ligand, L, featuring a triphenylamine core appended by pyridylimine coordination sites is reported: 1H NMR compleximetric titration studies with Ag(I) and ESMS indicate the presence of [Ag3L2]3+ species in solution, consistent with the formation of a trinuclear double helicate complex: the Trinity helix.     

Induced fit process in the selective distal binding of imidazoles in zinc(II) porphyrin receptors

The respective affinities of various imidazole derivatives, imidazole (ImH), 2-methylimidazole (2-MeImH), 2-phenylimidazole (2-PhImH), N-methylimidazole (N-MeIm), 2-methylbenzimidazole (2-MeBzImH), and 4,5-dimethylbenzimidazole (4,5-Me(2)BzImH), for two phenanthroline (Phen) strapped zinc(II) porphyrin receptors porphen-Zn 1-Zn and 2-Zn have been studied. The formation of a supplementary H-bond considerably enhances the affinity of the zinc(II)-porphen receptor for imidazoles unsubstituted on the pyrrolic nitrogen (ImH) versus N-substituted imidazoles such as N-MeIm. The ImHs subset porphen-Zn complexes are formed with association constants up to 4 orders of magnitude superior to those measured either for N-MeIm as substrate or TPP-Zn as receptor. Distal or proximal binding of the substrates was determined by (1)H NMR measurements and titration. In two cases, the very high stability of the inclusion complex enabled the use of 2D NMR techniques. Excellent correlation between solution and solid-state structures has been obtained. A total of six X-ray structures are detailed in this article showing that the evolution of the shape of the zinc(II) receptor is mostly dependent on the steric constraints induced by the substitution on the imidazole. Hindered guests also progressively induce considerable mobility restrictions and severe distortions on the receptor, especially in the case of 2-MeBzImH and 2-PhImH.     

Poly(9,9'-spirobifluorene-manganese porphyrin): a new catalytic material for oxidation of alkenes by iodobenzene diacetate and iodosylbenzene

Anodic oxidation of tetraspirobifluorene-manganese porphyrin lead to the coating of the working electrode by insoluble electroactive poly(9,9'-spirobifluorene-manganese porphyrin) films for which electrochemical behaviour and physicochemical properties are described; these polymeric materials are able to catalyze the heterogeneous epoxidation of styrene with iodobenzene diacetate and iodosylbenzene.     

Palladium catalysed cyclisation-carbonylation of enynes to give cyclic gamma,delta-unsaturated acids

In the presence of acetic acid, trifurylphosphine and CO (2 atm), palladium catalyses the conversion of a range of enynes to cyclic delta,gamma-unsaturated carboxylic acids in good yield.     

Measuring intracellular calcium fluxes in high throughput mode

The measurement of intracellular calcium fluxes in real time is widely applied within the pharmaceutical industry to measure the activation of G-protein coupled receptors (GPCRhyp;s), either for pharmacological characterisation or to screen for new surrogate ligands. Initially restricted to G(q) coupled GPCRs, the introduction of promiscuous and chimeric G-proteins has further widened the application of these assays. The development of new calcium sensitive dyes and assays has provided sensitive, homogeneous assays which can be readily applied to high throughput screening (HTS). In this paper we describe the full automation of this assay type using a fluorometric imaging plate reader (FLIPR ) integrated into a Beckman/Sagian system to establish a simple robotic system that is well suited for the current medium throughput screening in this area of lead discovery. Using a recently completed HTS we discuss important determinants for FLIPR based screening, highlight some limitations of the current approach, and look at the requirements for future automated systems capable of keeping up with expanding compound files.     

Chemistry of materials under extreme high pressure-high-temperature conditions

Most of our knowledge of chemistry is derived from experiments carried at the Earth's surface, at pressures near one atmosphere. However, most elements and compounds in the universe exist under conditions of extremely high pressures, often combined with high temperatures, deep within the planets and stars. Under these conditions, new high-density crystal forms occur, species usually known only as molecules become dense covalent or ionic solids, and insulators and semiconductors become metals and even superconductors. Valency states and coordination numbers are changed, and it is expected that chemical bonding and reactivity is modified. Paul McMillan describes how the field of condensed matter chemistry under extreme high pressure conditions now represents a vast new area to be explored.