Über den sterischen Verlauf der Umsetzung von Enaminen aus offenkettigen Aldehyden und Ketonen mit Nitroolefinen zu 2,3-disubstituierten 4-Nitroketonen

On the Steric Course of the Reaction of Enamines Derived from Open-Chain Aldehydes and Ketones with Nitro-olefins Yielding 2,3-Disubstituted 4-Nitroketones The relative configuration of the nitro-ketone 12 obtained by the title reaction has been proved by a Baeyer-Villiger degradation and subsequent reduction to the amino-alcohol (±)-(u)- 20 , the relative configuration of which is identical with a sample prepared from 2-methyl-3-hydroxybutyrate of known configuration (Scheme 1). The stereochemical course of the title reaction is thus as predicted by our topological rule. It is assumed that the other nitro-ketones 13–18 described here are also formed by (lk)-combination of the trigonal centers of the educts (diastereoselectivity > 90%, see Formulae and Fig. 1). It is not possible to reverse this relative topicity by employing (Z)- instead of (E)-components of the starting materials, due to the reversibility of the primary step of these Michael additions (Schemes 2 and 3, and Fig. 2).     

Development of Magnesium Anode-Based Transient Primary Batteries

Biodegradable primary batteries, also known as transient batteries, are essential to realize autonomous biodegradable electronic devices with high performance and advanced functionality. In this work, magnesium, copper, iron, and zinc – metals that exist as trace elements in the human body – were tested as materials for biomedical transient electronic devices. Different full cell combinations of Mg and X (where X = Cu, Fe, and Zn and the anodized form of the metals) with phosphate buffered saline (PBS) as electrolyte were studied. To form the cathodes, metal foils were anodized galvanostatically at a current density of 2.0 mA cm⁻² for 30 mins. Electrochemical measurements were then conducted for each electrode combination to evaluate full cell battery performance. Results showed that the Mg−Cu_anodized chemistry has the highest power density at 0.99 mW/cm². Nominal operating voltages of 1.26 V for the first 0.50 h and 0.63 V for the next 3.7 h were observed for Mg−Cu_anodized which was discharged at a current density of 0.70 mA cm⁻². Among the materials tested, Mg−Cu_anodized exhibited the best discharge performance with an average specific capacity of 2.94 mAh cm⁻², which is comparable to previous reports on transient batteries.     

New Bioactive Peptides Identified from a Tilapia Byproduct Hydrolysate Exerting Effects on DPP-IV Activity and Intestinal Hormones Regulation after Canine Gastrointestinal Simulated Digestion

Like their owners, dogs and cats are more and more affected by overweight and obesity-related problems and interest in functional pet foods is growing sharply. Through numerous studies, fish protein hydrolysates have proved their worth to prevent and manage obesity-related comorbidities like diabetes. In this work, a human in vitro static simulated gastrointestinal digestion model was adapted to the dog which allowed us to demonstrate the promising effects of a tilapia byproduct hydrolysate on the regulation of food intake and glucose metabolism. Promising effects on intestinal hormones secretion and dipeptidyl peptidase IV (DPP-IV) inhibitory activity were evidenced. We identify new bioactive peptides able to stimulate cholecystokinin (CCK) and glucagon-like peptide 1 (GLP-1) secretions, and to inhibit the DPP-IV activity after a transport study through a Caco-2 cell monolayer.     

Determination of Aluminum, Calcium, and Magnesium in Fraser Fir, Balsam Fir, and Red Spruce Foliage and Soil from the Southern and Middle Appalachians

Spruce–fir forests form unique ecosystems in the eastern United States and Canada. These forests are composed of Fraser fir (Abies fraseri) and red spruce (Picea rubens) in the Southern Appalachians, and balsam fir (Abies balsamea) and red spruce in the middle and northern Appalachians. Decline of spruce–fir forests has been observed since the 1960s that has been attributed, at least in part, to acidic deposition. Acidic deposition has been reported to decrease the availability of calcium and increase the availability of aluminum and induce decline of red spruce at high elevation sites above 1800 m. Aluminum, calcium, and magnesium were determined in Fraser fir, balsam fir, and red spruce foliage and soil from sites in the southern and middle Appalachians in order to evaluate whether acidic deposition may play a role in the decline of the conifers. Our nutrient studies did not provide any evidence that acidic deposition was affecting the conifers.     

Ozonation of pyrene and benzo[a]pyrene in silica and soil –14C-mass balances and chemical analysis of oxidation products as a first step to ecotoxicological evaluation

Ozonation of polycyclic aromatic hydrocarbons (PAHs) in soil is a process that can be used for in-situ soil remediation or in combination with bioremediation techniques. First steps to a comprehensive ecotoxicological evaluation of this method is done by ozonation of radioactively labeled (¹⁴C) pyrene and benzo[a]pyrene in a silty soil (LUFA 2.2) under mass-balancing conditions and GC-MS analysis of aromatic ozonation products. ¹⁴C-Mass-balances for pyrene and benzo[a]pyrene (b[a]p) in soil showed that, apart from ¹⁴CO₂ formation, considerable percentages of both PAHs are oxidized to water soluble substances (20–30%) or to non-extractable or bound residues (10% for pyrene, 30% for b[a]p). TLC and GC-MS analysis of ozonation products extractable from artificially contaminated silica and soil by organic solvents revealed a large number of aromatic substances. PAH-quinones and ten ring fission products with formyl- and carboxy-groups of both pyrene and b[a]p could be identified.     

Enantioselective 1,4-Addition of Aliphatic Grignard Reagents to Enones Catalyzed by Readily Available Copper(I) thiolates derived from TADDOL. Preliminary communication

Two simple thiols derived from the parent TADDOL, α,α,α′,α′ tetraphenyl-2,2-dimethyl-1,3-clioxolan-4,5-dimethanol, are used to prepare Cu¹ complexes C and D to catalyze (0.05 equiv.) 1,4-additions of Grignard reagents RMgCl to cyclic enones with enantioselectivities which are comparable to or better than previously reported (enantiomer ratios up to 92:8).     

Synthesis,Characterization and Evaluation of Peptide Nanostructures for Biomedical Applications

There is a challenging need for the development of new alternative nanostructures that can allow the coupling and/or encapsulation of therapeutic/diagnostic molecules while reducing their toxicity and improving their circulation and in-vivo targeting. Among the new materials using natural building blocks, peptides have attracted significant interest because of their simple structure, relative chemical and physical stability, diversity of sequences and forms, their easy functionalization with (bio)molecules and the possibility of synthesizing them in large quantities. A number of them have the ability to self-assemble into nanotubes, -spheres, -vesicles or -rods under mild conditions, which opens up new applications in biology and nanomedicine due to their intrinsic biocompatibility and biodegradability as well as their surface chemical reactivity via amino- and carboxyl groups. In order to obtain nanostructures suitable for biomedical applications, the structure, size, shape and surface chemistry of these nanoplatforms must be optimized. These properties depend directly on the nature and sequence of the amino acids that constitute them. It is therefore essential to control the order in which the amino acids are introduced during the synthesis of short peptide chains and to evaluate their in-vitro and in-vivo physico-chemical properties before testing them for biomedical applications. This review therefore focuses on the synthesis, functionalization and characterization of peptide sequences that can self-assemble to form nanostructures. The synthesis in batch or with new continuous flow and microflow techniques will be described and compared in terms of amino acids sequence, purification processes, functionalization or encapsulation of targeting ligands, imaging probes as well as therapeutic molecules. Their chemical and biological characterization will be presented to evaluate their purity, toxicity, biocompatibility and biodistribution, and some therapeutic properties in vitro and in vivo. Finally, their main applications in the biomedical field will be presented so as to highlight their importance and advantages over classical nanostructures.     

A study of method robustness for arsenic speciation in drinking water samples by anion exchange HPLC-ICP-MS

Regulating arsenic species in drinking waters is a reasonable objective, since the various species have different toxicological impacts. However, developing robust and sensitive speciation methods is mandatory prior to any such regulations. Numerous arsenic speciation publications exist, but the question of robustness or ruggedness for a regulatory method has not been fully explored. The present work illustrates the use of anion exchange chromatography coupled to ICP-MS with a commercially available "speciation kit" option. The mobile phase containing 2 mM NaH(2)PO(4) and 0.2 mM EDTA at pH 6 allowed adequate separation of four As species (As(III), As(V), MMAA, DMAA) in less than 10 min. The analytical performance characteristics studied, including method detection limits (lower than 100 ng L(-1) for all the species evaluated), proved the suitability of the method to fulfill the current regulation. Other parameters evaluated such as laboratory fortified blanks, spiked recoveries, and reproducibility over a certain period of time produced adequate results. The samples analyzed were taken from water utilities in different areas of the United States and were provided by the U.S. EPA. The data suggests the speciation setup performs to U.S. EPA specifications but sample treatment and chemistry are also important factors for achieving good recoveries for samples spiked with As(III) as arsenite and As(V) as arsenate.