Anatase TiO2 nanocomposites for antimicrobial coatings

A sol-gel chemistry approach was used to fabricate nanoparticles of TiO(2) in its anatase form. The particle size is shown to be sensitive to the use of HClO(4) or HNO(3) as acid catalyst. The gold-capped TiO(2) nanocomposites were processed by the reduction of gold on the surface of the TiO(2) nanoparticles via a chemical reduction or a photoreduction method. Different percentages of vanadium-doped TiO(2) nanoparticles, which extended the TiO(2) absorption wavelength from the ultraviolet to the visible region, were successfully prepared. The synthesized nanocomposites have a size of about 12-18 nm and an anatase phase as characterized by XRD, TEM, AFM, and UV-vis spectroscopy. The TiO(2) nanocomposite coatings have been applied on glass slide substrates. The antibacterial activity of TiO(2) nanocomposites was investigated qualitatively and quantitatively. Two types of bacteria, Escherichia coli (DH 5alpha) and Bacillus megaterium (QM B1551), were used during the experiments. Good inhibition results were observed and demonstrated visually. The quantitative examination of bacterial activity for E. coli was estimated by the survival ratio as calculated from the number of viable cells, which form colonies on the nutrient agar plates. The antimicrobial efficiency and inhibition mechanisms are illustrated and discussed.     

Multicommutation as an environmentally friendly analytical tool in the hydride generation atomic fluorescence determination of tellurium in milk

The aim of this study is to show the advantages of the emerging multicommutation methodology based on the use of solenoid valves for Te determination in milk by hydride generation atomic fluorescence spectrometry (HG-AFS). The delivery of a series of alternating sequential insertions of small volumes of samples and reagents gives rise to new hydrodynamic processes and exciting analytical potentials by controlling the time of flow through the on/off-switched solenoid valves. This drastically reduces the reagent consumption by a factor of 4 and the generation of effluents (590 mL h^–1 instead of 750 mL h^–1 generated by the continuous-mode measurement) and also provides an improvement in the laboratory productivity by an increase of the sample throughput (85 h^–1 compared to 20 h^–1 found in the continuous mode). So, multicommutation is an environmentally and economically sustainable alternative to the methodology based on continuous measurements. The multicommutation-based method developed was applied to tellurium determination in commercially available milk samples; a calibration range of 0.0–0.5 ng mL^–1 and a detection limit of 0.20 ng L^–1 with average relative standard deviation of 2.1% were found. Comparable results were obtained for a series of samples using both continuous and multicommutation HG-AFS modes.     

DOSE-RESPONSE OF CHRONIC ULTRAVIOLET EXPOSURE ON EPIDERMAL FORWARD SCATTERING-ABSORPTION IN SK-1 HAIRLESS MOUSE SKIN

This work provides a dose-response model of UV-induced epidermal-stratum corneum thickening induced by irradiation at wavelength lambda. This model assumes that photobiochemical reaction(s) can give rise to hyperplasia in a manner which is predictable from a simple photochemical kinetic scheme. In this work, we derive an equation which predicts an approximately linear relationship between the logarithm of the increase in optical skin thickening measured at 320 nm (delta OD320) and total cumulative dose (DT) seen by the target cells in or near the basal layer. For each excitation wavelength lambda, the slope R(lambda) of the log delta OD320 vs DT plot is proportional to epsilon(lambda) phi rx, where epsilon(lambda) is the extinction coefficient for the target chromophore at excitation wavelength, and phi rx is the quantum yield for the photochemical reaction(s) leading to hyperplasia. Our data previously obtained from irradiation of SK-1 hairless mice with "monochromatic" UV wavebands at 280, 290, 300, 307 and 313 nm (Menter et al., 1988, Photochem. Photobiol. 47, 225-260.) and data from Sterenborg and van der Leun at 254 and 313 nm (1988, Photodermatology 5, 71-82) are in good agreement with this model, except for 254 and 280 nm excitation, which are greatly attenuated by epidermis-stratum corneum. For excitation at the latter wavelengths, "dark" regressive processes successfully compete with the "light" reaction(s) which lead to (pre)cancerous lesion. This difficulty notwithstanding, the "intrinsic" action spectrum for hyperplasia derived from these measurements indicates that the target chromophore preferentially absorbs in the UV-C region.(ABSTRACT TRUNCATED AT 250 WORDS)     

Quantitative characterization of the global electrophilicity pattern of some reagents involved in 1,3-dipolar cycloaddition reactions

The global electrophilicity power, ω, of a series of dipoles and dipolarophiles commonly used in 1,3-dipolar cycloadditions may be conveniently classified within a unique relative scale. The effects of chemical substitution on the electrophilicity of molecules have been evaluated using a representative set of electron-withdrawing and electron-releasing groups for a series of dipoles including nitrone, nitrile oxide and azide derivatives. The absolute scale of electrophilicity is used to rationalize the chemical reactivity of these species as compared to the static reactivity pattern of the reagents involved in the Diels-Alder reactions.     

Characterisation and proposed origin of mass spectrometric ions observed 30 Th above the ionised molecules of per-O-methylated carbohydrates

Derivatisation of carbohydrates by permethylation significantly improves the mass spectrometric intensity of carbohydrate-derived ions and allows more readily interpretable fragmentation; in addition, samples are conveniently separated from salts, and larger oligosaccharides are more readily ionised. It has previously been recognised that, in the mass spectra of permethylated carbohydrates, a series of ions indicating species 30 Da larger than the fully methylated carbohydrate molecules are also observed. These species have not been characterised in the literature despite their apparently ubiquitous occurrence in the mass spectra of permethylated carbohydrates. Tandem mass spectrometry (MS/MS) experiments were performed on permethylated carbohydrates and reduced permethylated carbohydrates that exhibit the artefact, demonstrating that the artefact is not reducing terminal specific, and that the artefact can be introduced at any hydroxyl residue. It was further demonstrated through the use of different alkylation reagents that the origin of this artefact group is the alkylating reagent itself. It is proposed that side reactions that occur between the permethylation reagents allow the production of small amounts of iodomethyl methyl ether. This reagent can then compete with methyl iodide for reaction with the carbohydrate -OH groups. The result is partial incorporation of a methoxymethyl moiety instead of a methyl group, detected as '+30' artefact ions.     

Insight into the reactivity of olefins in the Pauson-Khand reaction

The reactivity of different Co(2)(CO)(6)-acetylene complexes in the Pauson-Khand reaction is strongly dependent on the nature of the olefin. Theoretical calculations at both the DFT and ONIOM levels are concordant with experimental observations and suggest how the olefin-cobalt interactions in the complex could have a major effect on the relative reactivity of the olefins. This study rationalizes for the first time the experimentally observed reactivity differences of cyclohexene, cyclopentene, and norbornene.     

A multitechnique surface analytical study of a segmented block copolymer poly(ether-urethane) modified through an H2O radio frequency glow discharge

Recent work in our laboratories has fully characterized the surface region of a segmented poly(ether-urethane) (PEU) extending from the air/polymer interfacial region through bulk depths in the micron range. This characterization utilized energy and angle dependent Electron Spectroscopy for Chemical Analysis (ESCA), Attenuated Total Reflectance–Fourier Transform Infrared Spectroscopy (ATR–FTIR), and Comprehensive Wettability Profiling (contact angle using a homologous series of liquids) as defined by Zisman. In this study this same multi-analytical-technique approach is used to elucidate changes in these PEU surfaces induced through an H₂O Radio Frequency Glow Discharge (RFGD) plasma. This investigation reports both qualitative and quantitative changes due to the modification treatments as well as the permanency of the changes effected on these surfaces through the plasma treatment. From our analyses, the amount of surface residing polyurethane (hard segment) is observed to increase due to a proposed plasma etching mechanism. Further, the addition of oxygen containing functionality is detected at the modified surfaces unique with respect to the unmodified PEU. These surface modifications which show large increases in wettability, are finally observed to be semi-permanent over a time period of 6 months.     

On the determination of crystallinity and cellulose content in plant fibres

A comparative study of cellulose crystallinity based on the sample crystallinity and the cellulose content in plant fibres was performed for samples of different origin. Strong acid hydrolysis was found superior to agricultural fibre analysis and comprehensive plant fibre analysis for a consistent determination of the cellulose content. Crystallinity determinations were based on X-ray powder diffraction methods using side-loaded samples in reflection (Bragg-Brentano) mode. Rietveld refinements based on the recently published crystal structure of cellulose Iβ followed by integration of the crystalline and amorphous (background) parts were performed. This was shown to be straightforward to use and in many ways advantageous to traditional crystallinity determinations using the Segal or the Ruland–Vonk methods. The determined cellulose crystallinities were 90–100 g/100 g cellulose in plant-based fibres and 60–70 g/100 g cellulose in wood based fibres. These findings are significant in relation to strong fibre composites and bio-ethanol production.     

Characterisation of a wheat straw cell wall residue by various techniques: A comparative study with a synthetic and an extracted lignin

Comparative studies using various analytical and spectroscopic techniques have been carried out on three samples of lignin: two samples of natural lignin that have been extracted using different processes, and one sample of synthetic lignin. This paper discusses the general features common to all three kinds of lignin, as well as the differences between, on one hand, the two natural lignins coming from different extraction processes, and, on the other hand, the natural lignins and the synthetic one. The advantages of each technique in explaining the structure of these three different lignins are emphasised.     

Simultaneous determinations of a monofluorinated imidazo[1, 5-a] [1, 4] benzodiazepine and the corresponding benzophenone as a function of pH and in aqueous formulations by 19F nuclear magnetic resonance spectrometry

8-Chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1, 5-a] [1, 4 ]benzodiazepine (called “midazolam”) exists in equilibrium with the corresponding benzophenone (the“open-Mng form”). The two compounds were determined simultaneously as a function of pH with ¹⁹F-n.m.r. spectrometry. In a unique application of ¹⁹F-n.m.r. spectrometry, the compounds are determined simultaneously in aqueous dosage forms without the need for sample preparation. The optimum signal-to-noise ratio for the major compound for the lowest concentration of sample used (≈ 1 mg ml^-1) was 200:1 for 3000 scans. This was obtained by partial proton decoupling and exponential multiplication of the free induction decay with a line-broadening parameter of 12 Hz. Quantitative results are presented with a standard deviation of < 2.0% in the mean ratio of the two compounds. The results are also compared with those obtained by the spectrophotometric fluorescamine method. Advantages of the ¹⁹F-n.m.r. technique in this determination are discussed.