Novel Copolymers of 4-Fluorostyrene. 9. Some Ring-Disubstituted 2-Phenyl-1,1-dicyanoethylenes

Novel copolymers of trisubstituted ethylene monomers, ring-disubstituted 2-phenyl-1,1-dicyanoethylenes, RC₆H₃CH=C(CN)₂ (where R = 3-Br-4-CH₃O, 5-Br-2-CH₃O, 2-F-5-CH₃, 2-F-6-CH₃, 3-F-2-CH₃, 3-F-4-CH₃, 4-F-2-CH₃, 4-F-3-CH₃) and 4-fluorostyrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers is 3-F-4-CH₃(1.64) > 5-Br-2-CH₃O (1.62) > 3-Br-4-CH₃O (1.36) > 4-F-2-CH₃(1.3) > 4-F-3-CH₃(1.26) > 3-F-2-CH₃(1.11) > 2-F-5-CH₃ (0.98) > 2-F-6-CH₃ (0.97). High T_g of the copolymers, in comparison with that of poly(4-fluorostyrene) indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 290–400°C range with residue, which then decomposed in 400–800°C range.     

Comparison of direct mass spectrometry methods for the on‐line analysis of volatile compounds in foods

For the on‐line monitoring of flavour compound release, atmospheric pressure chemical ionization (APCI) and proton transfer reaction (PTR) combined to mass spectrometry (MS) are the most often used ionization technologies. APCI‐MS was questioned for the quantification of volatiles in complex mixtures, but direct comparisons of APCI and PTR techniques applied on the same samples remain scarce. The aim of this work was to compare the potentialities of both techniques for the study of in vitro and in vivo flavour release. Aroma release from flavoured aqueous solutions (in vitro measurements in Teflon bags and glass vials) or flavoured candies (in vivo measurements on six panellists) was studied using APCI‐ and PTR‐MS. Very similar results were obtained with both techniques. Their sensitivities, expressed as limit of detection of 2,5‐dimethylpyrazine, were found equivalent at 12 ng/l air. Analyses of Teflon bag headspace revealed a poor repeatability and important ionization competitions with both APCI‐ and PTR‐MS, particularly between an ester and a secondary alcohol. These phenomena were attributed to dependency on moisture content, gas/liquid volume ratio, proton affinities and product ion distribution, together with inherent drawbacks of Teflon bags (adsorption, condensation of water and polar molecules). Concerning the analyses of vial headspace and in vivo analyses, similar results were obtained with both techniques, revealing no competition phenomena. This study highlighted the equivalent performances of APCI‐MS and PTR‐MS for in vitro and in vivo flavour release investigations and provided useful data on the problematic use of sample bags for headspace analyses. Copyright © 2013 John Wiley & Sons, Ltd.     

Instrumental Dependent Dissociations of n-Propyl/Isopropyl Phosphonate Isomers: Evaluation of Resonant and Non-Resonant Vibrational Activations

Structural elucidation and distinction of isomeric neurotoxic agents remain a challenge. Tandem mass spectrometry can be used for this purpose in particular if a “diagnostic” product ion is observed. Different vibrational activation methods were investigated to enhance formation of diagnostic ions through consecutive processes from O,O-dialkyl alkylphosphonates. Resonant and non-resonant collisional activation and infrared multiphoton dissociation (IRMPD) were used with different mass spectrometers: a hybrid quadrupole Fourier transform ion cyclotron resonance (Qh-FTICR) and a hybrid linear ion trap-Orbitrap (LTQ/Orbitrap). Double resonance (DR) experiments, in ion cyclotron resonance (ICR) cell, were used for unambiguous determination of direct intermediate yielding diagnostic ions. From protonated n-propyl and isopropyl O-O-dialkyl-phosphonates, a diagnostic m/z 83 ion characterizes the isopropyl isomer. This ion is produced through consecutive dissociation processes. Conditions to favor its formation and observation using different activation methods were investigated. It was shown that with the LTQ, consecutive experimental steps of isolation/activation with modified trapping conditions limiting the low mass cut off (LMCO) effect were required, whereas with FT-ICR by CID and IRMPD the diagnostic ion detection was provided only by one activation step. Among the different investigated activation methods it was shown that by using low-pressure conditions or using non-resonant methods, efficient and fast differentiation of isomeric neurotoxic agents was obtained. This work constitutes a unique comparison of different activation modes for distinction of isomers showing the instrumental dependence characteristic of the consecutive processes. New insights in the dissociation pathways were obtained based on double-resonance IRMPD experiments using a FT-ICR instrument with limitation at low mass values.

Batch profiling calibration for robust NMR metabonomic data analysis

Metabonomic studies involve the analysis of large numbers of samples to identify significant changes in the metabolic fingerprints of biological systems, possibly with sufficient statistical power for analysis. While procedures related to sample preparation and spectral data acquisition generally include the use of independent sample batches, these might be sources of systematic variation whose effects should be removed to focus on phenotyping the relevant biological variability. In this work, we describe a grouped-batch profile (GBP) calibration strategy to adjust nuclear magnetic resonance (NMR) metabolomic data-sets for batch effects either introduced during NMR experiments or samples work-up. We show how this method can be applied to data calibration in the context of a large-scale NMR epidemiological study where quality control samples are available. We also illustrate the efficiency of a batch profile correction for NMR metabonomic investigation of cell extracts, where GBP can significantly improve the predictive power of multivariate statistical models for discriminant analysis of the cell infection status. The method is applicable to a broad range of NMR metabolomic/metabonomic cohort studies.     

Hybridization detection of enzyme-labeled DNA at electrically heated electrodes

In this report we describe an electrochemical DNA hybridization sensor approach, in which signal amplification is achieved using heated electrodes together with an enzyme as DNA-label. On the surface of the heatable low temperature co-fired ceramic (LTCC) gold electrode, an immobilized thiolated capture probe was hybridized with a biotinylated target using alkaline phosphatase (SA-ALP) as reporter molecule. The enzyme label converted the redox-inactive substrate 1-naphthyl phosphate (NAP) into the redox-active 1-naphthol voltammetrically determined at the modified gold LTCC electrode. During the measurement only the electrode was heated leaving the bulk solution at ambient temperature. Elevated temperature during detection led to increased enzyme activity and enhanced analytical signals for DNA hybridization detection. The limit of detection at 53 °C electrode temperature was 1.2 nmol/L.     

Facile Synthesis of 3,6‐Diaminopyridazine

An efficient two‐step synthesis of 3,6‐diaminopyridazine from 3,6‐dichloropyridazine is reported. In this synthetic procedure, 4‐methoxybenzylamine was used as a nitrogen source to substitute the chloro groups of 3,6‐dichloropyridazine to form N,N′‐bis‐(4‐methoxybenzyl)‐pyridazine‐3,6‐diamine. The 4‐methoxybenzyl groups were then removed by treatment with hydrochloric acid to provide the target 3,6‐diaminopyridazine with an overall yield of 78%.     

Studies on Pyrrolidinones. An Improved One Pot Synthesis of 1,2,3,5,10,10a-Hexahydrobenz[f]indolizine-3,10-dione

Starting from the readily available N,O-bis trimethylsilyl pyroglutamate, an easy high yield one pot synthesis of ketone 1 was described.     

Synthesis and Spectroscopic Characterization of Fluorophore‐Labeled Oligospiroketal Rods

Fluorescence probes consisting of well‐established fluorophores in combination with rigid molecular rods based on spirane‐type structures were investigated with respect to their fluorescence properties under different solvent conditions. The attachment of the dyes was accomplished by 1,3‐dipolar cycloaddition between alkynes and azides (‘click’ reaction) and is a prime example for a novel class of sensor constructs. Especially, the attachment of two (different) fluorophores on opposite sides of the molecular rods paves the way to new sensor systems with less bulky (compared to the conventional DNA‐ or protein‐based concepts), nevertheless rigid spacer constructs, e.g., for FRET‐based sensing applications. A detailed photophysical characterization was performed in MeOH (and in basic H₂O/MeOH mixtures) for i) rod constructs containing carboxyfluorescein, ii) rod constructs containing carboxyrhodamine, iii) rod constructs containing both carboxyfluorescein and carboxyrhodamine, and iv) rod constructs containing both pyrene and perylene parts. For each dye (pair), two rod lengths with different numbers of spirane units were synthesized and investigated. The rod constructs were characterized in ensemble as well as single‐molecule fluorescence experiments with respect to i) specific rod? dye and ii) dye? dye interactions. In addition to MeOH and MeOH/NaOH, the rod constructs were also investigated in micellar systems, which were chosen as a simplified model for membranes.     

Sun Exposure over a Lifetime in Australian Adults from Latitudinally Diverse Regions

Spatio‐temporal patterns in sun exposure underlie variations in skin cancer incidence and vitamin D deficiency, indicate effectiveness of sun protection programs and provide insights into future health risks. From 558 adults across four regions of Australia (Brisbane (27°S), Newcastle (33°S), Geelong and the Western Districts of Victoria (37°S) and Tasmania (43°S)), we collected: self‐report data on time‐in‐the‐sun from age 6 years; natural skin color and ethnicity; silicone skin casts (for cumulative skin damage); and serum for vitamin D status. Ambient ultraviolet radiation (UVR) at the location of residence, with time‐in‐the‐sun, was used to calculate a “UVR dose” for each year of life. Individuals maintained their ranking compared to their peers for time‐in‐the‐sun in summer compared to winter and across ages (Spearman rho 0.24–0.84, all P < 0.001). Time‐in‐the‐sun decreased with age in all birth cohorts, and over calendar time. Summer time‐in‐the‐sun increased with increasing latitude (P < 0.001). Seasonal variation in vitamin D status had greater amplitude and vitamin D deficiency increased with increasing latitude. Temporal patterns are consistent with effectiveness of sun protection programs. Higher relative time‐in‐the‐sun persists from childhood through adulthood. Lower summer time‐in‐the‐sun in the warmest location may have implications for predictions of UVR‐related health risks of climate change.