Photosensitization of TiO2 colloids by Erythrosin B in acetonitrile

Photosensitization by Erythrosin B of a TiO₂ colloidal dispersion in acetonitrile has been studied by fast kinetic spectroscopy. The dye molecules adsorbed on the TiO₂ surface had a significantly shorter lifetime (2̃ 250 ps) compared to those in homogeneous solution (≈ 1.6 ns) in acetonitrile. The photosensitization of TiO₂ occurred more efficiently from the singlet than from the triplet state of the dye.     

Synthesis and antifolate activity of 8,10-dideazaminopterin

A synthesis of 8,10-dideazaminopterin, using 2,4-diamino-6-bromomethyl-8-deazapteridine ( 2 ) as a key intermediate, is described. Condensation of the triphenylphosphinylide derived from 2 with p-formylbenzoyl-L-glutamate afforded a 9,10-dehydro-8,10-dideazaminopterin ester intermediate 5 . Hydrogenation of the olefinic linkage and subsequent hydrolysis of the glutamate ester gave the title compound. 8,10-Dideazaminopterin was a potent growth inhibitor of folate dependent bacteria. It was 16 times more potent then methotrexate as an inhibitor of dihydrofolate reductase derived from L1210 leukemia cells, and showed strong activity against L1210 in mice.     

Proton to carbon-13 INEPT in solid-state NMR spectroscopy

A refocused INEPT through-bond coherence transfer technique is demonstrated for NMR of rigid organic solids and is shown to provide a valuable building block for the development of NMR correlation experiments in biological solids. The use of efficient proton homonuclear dipolar decoupling in combination with a direct spectral optimization procedure provides minimization of the transverse dephasing of coherences and leads to very efficient through-bond (1)H-(13)C INEPT transfer for crystalline organic compounds. Application of this technique to 2D heteronuclear correlation spectroscopy leads to up to a factor of 3 increase in sensitivity for a carbon-13 enriched sample in comparison to standard through-bond experiments and provides excellent selectivity for one-bond transfer. The method is demonstrated on a microcrystalline sample of the protein Crh (2 x 10.4 kDa).     

Acrylamide analysis: assessment of results from six rounds of Food Analysis Performance Assessment Scheme (FAPAS) proficiency testing

Six proficiency tests have now been completed in an ongoing program of the UK Food Analysis Performance Assessment Scheme (FAPAS) for the analysis of acrylamide in a range of food matrixes. Homogeneous test material samples were requested by laboratories throughout the world, with 29 to 45 submitting results for each test. Results were analyzed by appropriate statistical procedures, and z-scores were awarded for reported values. In the absence of both legislation and collaborative trial data, the target standard deviation was derived from the Horwitz equation, although it is acknowledged that there is a need to establish a "fit for purpose" target standard deviation specifically for acrylamide analysis. Participants were encouraged to use the analytical method routinely used in their own laboratory and to provide details of their procedure. Close examination of the data submitted indicates that performance is generally acceptable in terms of accuracy. There is no significant difference between results submitted by gas chromatography and liquid chromatography (GC and LC) methods, and no method dependency on the use of internal standards or sample size. However, choice of extraction solvent may be important, with indications that plain water is an acceptable extraction method. There is evidence from the most recent test that direct (underivatized) GC methodology may present problems, but more data are required and this aspect will be monitored in the continuing proficiency testing program.     

Alkylation of heme by the antimalarial drug artemisinin

The peroxide function of artemisinin has been activated by iron(II)-heme generated in situ from iron(III)-protoporphyrin-IX and glutathione, a biologically relevant reductant. In mild conditions, this reaction produced a high yield (85%) of heme derivatives alkylated at alpha-, beta-, and delta-meso positions by a C4-centered radical derived from artemisinin.     

Evaluation and application of bismuth as an internal standard for the determination of lead in wines by simultaneous electrothermal atomic absorption spectrometry

A method for the direct determination of Pb in wines by simultaneous multi-element atomic absorption spectrometry (SIMAAS) using a transversely heated graphite atomizer, Zeeman-effect background corrector and internal standardization is proposed. Bismuth was used as an internal standard and Pd(NO3)2 plus Mg(NO3)2 as chemical modifier to stabilize both the analyte and the internal standard. The implementation of two pyrolysis steps avoided any build-up of carbonaceous residues on the graphite platform. All diluted samples (1 + 1 v/v) in 0.2% v/v HNO3 and reference solutions (5.0-50 microg l(-1) Pb in 0.2% v/v HNO3) were spiked with 25 microg l(-1) Bi. For a 20 microl aliquot dispensed into the graphite tube, a good correlation (r = 0.9997) was obtained between the ratio of the analyte signal to the internal standard signal and the analyte concentration of the reference solutions. The electrothermal behaviour of Pb and Bi in red, white and rosé wines were compared. In addition, absorbance variations due to changes in experimental conditions, such as atomizer temperature, integration time, injected sample volume, radiation beam intensity, graphite tube surface, dilution and sample composition, were minimized by using Bi as internal standard. Relative standard deviations of measurements based on integrated absorbance varied from 0.1 to 3.4% and from 0.5 to 7.3% (n = 12) with and without internal standard correction, respectively. Good recoveries (91-104%) for Pb spikes were obtained. The characteristic mass was 45 pg Pb and the limit of detection based on integrated absorbance was 0.9 microg l(-1) Pb. Internal standardization increased the lifetime of the tube by 25%. Direct determinations of Pb in wines with and without internal standardization approaches were in agreement at the 95% confidence level. The repeatability and the tube lifetime were improved when using Bi as internal standard. The improvement in accuracy using an internal standard was only observed when the analytical results were affected by errors.     

Novel estradiol derivatives labeled with Ru,W, and Co complexes. Influence on hormone-receptor affinity of several organometallic groups at the 17 alpha position

In order to elucidate the extent to which recognition of the estrogen receptor is influenced by addition of an organometallic substituent at the 17 alpha position, modification of 17 beta-estradiol at this position was carried out by using the organometallic groups -C identical to C(eta 5-C5H4)RuCp, CH2-(eta 5-C5H4)RuCp, -C identical to C-(eta 5-C5H4)-W(CO)3(Me), -(C identical to CCHO)Co2(CO)6, and -(C identical to CCH2OH)Co2(CO)6. The relative binding affinity (RBA) values for estradiol receptor alpha showed that recognition was good (RBA between 20 and 13.5%) when the organometallic moiety was attached at the end of a rigid alkyne spacer. However, the affinity of the modified hormone for the receptor was severely reduced (RBA = 1%) for a substituent such as -CH2-(eta 5-C5H4)RuCP, in which the spacer is reduced to a single flexible sp3 carbon atom, allowing the organometallic moiety greater freedom of movement around the attachment point. The RBA values found were in agreement with results obtained from a molecular-modeling study in which 5, an organometallic hormone with a rigid spacer, or 7, a molecule with a flexible spacer, was inserted into the cavity of the recently characterized Ligand-Binding Domain of estrogen receptor alpha.     

Chromatographic studies of corrosion sites in metallic materials

Many types of corrosion phenomena are controlled by the ionic composition of a small volume of solution at the surface. Localized corrosion and atmospheric corrosion are two examples in which < 1 μl of solution can cause dramatic damage. Ion chromatographic (IC) techniques have been used to analyze these solutions in order to gain a better understanding of the mechanisms which govern them. Two examples are presented. The presence of minor alloying elements at localized corrosion sites in two aluminum alloys has been demonstrated, indicating non-stoichiometric dissolution of the alloy during localized corrosion. In addition, IC analysis allowed the determination of the species responsible for the atmospheric corrosion failure of electrical connectors, including their likely origin.     

Anionic copper complex fragmentations from enkephalins under low-energy collision-induced dissociation in an ion trap mass spectrometer

Peptide metallation with Cu2+ was explored in the negative ESI mode using an ion trap mass spectrometer. Under these conditions, the [(M-3H) + CuII]- species formed were investigated under low-energy collision-induced dissociation conditions. MS2 experiments indicate a very different behavior of CuII metallated complexes compared with [M-H]- species. CuII induces an easy loss of CO2 and specific side-chain cleavages (by radical losses) at the C-terminal residue, as observed previously by prompt 'in source' dissociation experiments. The loss of CO2 yields an unstable carbylide that leads to further dissociations involving the migration of a proton or a hydrogen radical (through the reduction of CuII). Multistage MS3 experiments were carried out to rationalize this behavior. Fragmentation pathways are proposed in order to explain the product ions observed. The side-chain radical loss at the C-terminus was demonstrated to be a consecutive process. Finally, evidence is provided that the specific side-chain cleavages can be used for the differentiation of Leu/Ile and Gln/Lys residues when they are located at the C-terminus. The existence of a zwitterionic form in the case of the anionic YGGFK-CuII complex is proposed.