Synthesis, X-ray diffraction analysis and NMR studies of (Z)-2-methyl-3-triphenylstannyl-3-pentene-2-ol

The synthesis of (Z)-2-methyl-3-triphenylstannyl-3-pentene-2-ol and its characterization by an X-ray diffraction study and multinuclear NMR are reported. The tin atom exhibits a distorted tetrahedral SnC₄ geometry with the four Sn---C bond distances experimentally equivalent. The slight distortion from the ideal tetrahedral geometry is because of the presence of a weak intramolecular HO → Sn interaction of 3.012(3) Å which produces a loose four-membered ring. The title compound was characterized in solution by ¹H, ¹³C and ¹¹⁹Sn NMR, and the persistence of the weak intramolecular HO → Sn coordination in solution was revealed by ¹³C and ¹¹⁹Sn secondary isotope multiplet of partially labelled entities (SIMPLE-NMR) experiments.     

Successive substitution titration of calcium and magnesium with EGTA using thallium oxide electrode for indication

Summary It is demonstrated that magnesium can be titrated with EGTA in the presence of CaEDTA complex. On the basis of this substitution reaction, calcium and magnesium are successively titrated with EGTA, if an appropriate amount of CaEDTA is added after having reached the end point for calcium. Both end points are indicated amperometrically using a thallium oxide anode. The method has been tested for analysis of tap and mineral water. Larger amounts of manganese(II) render the calcium result too high. Moreover, the indication of both end points is affected by the electrode position of an inactive MnO₂-layer onto the Tl₂O₃-layer. Reducing agents destroy the Tl₂O₃-layer. These interferences can be overcome by addition of an appropriate amount of manganate(VII) to the sample.

---

Sukzessive Substitutionstitration von Calcium und Magnesium mit ÄGTA, indiziert mit der Thalliumoxidelektrode

Zusammenfassung Magnesium kann mit ÄGTA in Gegenwart des CaÄDTA-Komplexes titriert werden. Auf der Grundlage dieser Substitutionstitration können Calcium und Magnesium nacheinander mit ÄGTA titriert werden, wenn nach dem Endpunkt für Calcium eine ausreichende Menge CaÄDTA zugesetzt wird. Beide Endpunkte werden amperometrisch mit Hilfe einer Thalliumoxidelektrode angezeigt. Die Methode wurde an Leitungswasser und Mineralwasser geprüft. Größere Mengen Mangan(II) bewirken zu hohe Calciumwerte. Darüber hinaus wird die Indikation beider Endpunkte dadurch beeinträchtigt, daß sich eine inaktive MnO₂-Schicht auf der Tl₂O₃-Schicht elektrolytisch abscheidet. Reduzierende Stoffe zerstören die Tl₂O₃-Schicht. Diese Störungen können durch Zugabe von Permanganat vermieden werden.

     

Morphological and chemical characteristics of airborne tungsten particles of Fallon, Nevada.

Morphological and chemical characteristics were determined for airborne tungsten particles in Fallon, Nevada, a town that is distinguishable environmentally by elevated airborne tungsten and cobalt. From samples of airborne dust collected previously at six different places in Fallon, tungsten-rich dust particles were isolated and analyzed with automated electron microprobe and wavelength-dispersive spectrometry. Representative W particles were further analyzed using transmission electron microscopy. Morphologically, Fallon W particles are angular and small, with minimum and maximum sizes of < or = 1 microm and 5.9 microm in diameter, respectively. The number and size of tungsten-rich particles decrease in Fallon with distance from a hard-metal facility located near the center of town. Chemically, Fallon airborne W particles include mixtures of tungsten with cobalt plus other metals such as chromium, iron, and copper. No W-rich particles were identifiable as CaWO4 (scheelite) or MnWO4 (huebnerite). From d-spacings, Fallon particles are most consistent with identification as tungsten carbide. Based on these multiple lines of evidence, airborne W particles in Fallon are anthropogenic in origin, not natural. The hard-metal facility in Fallon processes finely powdered W and W-Co, and further investigation using tracer particles is recommended to definitively identify the source of Fallon's airborne tungsten.     

Evaluation of VIDAs Immuno-concentration Salmonella assay Plus selective plate method (Hektoen enteric,bismuth sulfite,Salmonella identification) for detection of Salmonella in selected foods: collaborative study

The VIDAS Immuno-concentration Salmonella (ICS) plus selective plate method (Hektoen enteric, bismuth sulfite, Salmonella identification) method for the detection of Salmonella was compared to the Bacteriological Analytical Manual (BAM)/AOAC culture method in a collaborative study. Thirty-two laboratories participated in the evaluation. Each laboratory tested one or more of the 6 test products: milk chocolate, nonfat dry milk, dried whole egg, soy flour, ground black pepper, and ground raw turkey. The 2 methods were in agreement for 1,283 of the 1,440 test samples. Of the 157 test samples not in agreement, 82 were VIDAS ICS plus selective plate-positive and BAM/AOAC-negative, and 75 were VIDAS ICS plus selective plate-negative and BAM/AOAC-positive.     

The transient behaviour of models of bowed-string motion

Theoretical models of the action of a bowed string may be able to shed light on differences of "playability" between different violins. Subjective judgements seem to be concerned, at least in part, with the robustness with which one particular oscillation regime of the string (the "Helmholtz motion") may be obtained under different bowing conditions. In this paper, after a review of bowed-string modelling, systematic simulation is used to obtain plots of the basin of attraction of the Helmholtz motion in a particular subspace of the player's control space. Variations in the size and structure of this basin of attraction are seen when parameters of the problem are varied, and some physical interpretation of these variations is given. Some parallels and contrasts are pointed out between the particular features of the bowed string as a nonlinear system, and the range of more familiar dynamical systems. (c) 1995 American Institute of Physics.     

Cross-channel coupling in positron-atom scattering

Coupled-state calculations including positronium channels are reported for positron scattering by atomic hydrogen, lithium and sodium. Integrated cross sections and total cross sections are presented for all three atoms. For lithium differential cross sections are also given. Throughout, comparison is made between results calculated with and without inclusion of the positronium channels. S-wave cross sections for positron scattering by atomic hydrogen in the Ps(1s, 2s, 2p)+H(1s, 2s, 2p) approximation show the high energy resonance first observed by Higgins and Burke in the coupled-static approximation. This resonance has now moved up to 51.05 eV and narrowed in width to 2.92 eV. Other pronounced structure is seen in the S-wave cross sections between 10 and 20 eV; it is tentatively suggested that this structure may be due to the formation of a temporary pseudo-molecular collision complex. Results calculated in the Ps(1s, 2s, , 2p, ,+H(1s, 2s, , 2p, approximation show convergence towards accurate values in the energy region below and in the Ore gap. Contrary to previous work on lithium using only an atomic basis, it is found that coupling to the 3d state of lithium is not so important when positronium channels are included; this is because a mixed basis of atom and positronium states gives a more rapidly convergent approximation than an expansion based on atom states alone. The threshold behaviour of the elastic cross section and the Ps(1s) formation cross section for lithium is investigated. Results in the Ps(1s, 2s, 2p)+Na(3s, 3p) approximation for sodium show good agreement with the total cross section measurements of Kwan et al.     

Subthreshold antiproton andK − production in heavy ion collisions

Subthreshold ¯p andK ^– and energetic ^– production was studied in Ne + NaF, Cu, Sn and Bi, and in Ni + Ni collisions with incident energies between 1.6 and 2 GeV/u. The measured cross sections indicate a dominant contribution of baryonic resonances. This is also consistent with a generalized scaling behaviour of the cross sections with the energy available in the collision and the energy necessary to produce particles as observed with Ne induced reactions. Deviations from scaling especially pronounced in the Ni-Ni system will be discussed in terms of absorption effects. The flat slope of the excitation function for ¯p production can be related to a reduced production threshold caused by a reduction of the antiproton mass in the dense and heated medium by about 100—150 MeV/c². A similar in-medium mass reduction is also indicated forK ^– mesons. An increased ¯p reabsorption probability for the heavier systems is concluded from the comparison of the ¯p yields in Ne + NaF, Ne + Sn and Ni + Ni collisions.Dedicated to Professor Klaus Dietrich on the occasion of his 60th birthday.     

Three-valued derived logics for classical phase spaces

Reichenbach proposed a three-valued logic to describe quantum mechanics. In his development, Reichenbach presented three different negation operators without providing any criteria for choosing among them. In this paper we develop two three-valuedderived logics for classical systems. These logics are derived in that they are based on a theory of physical measurement. In this regard they have some of the characteristics of the quantum logic developed by Birkhoff and von Neumann. The theory of measurement used in the present development is the one used previously in developingbivalent derived logics for classical systems. As these systems are derived logics, many of the ambiguities possessed by systems such as Reichenbach's are avoided.     

An Alternative to Automatic Titration

Automatic titrators are designed to do exactly what a lab-technician used to do. Much more sophisticated automation of volumetry is possible. Omegaphoresis [3] in buffer-free [2] sample solutions automatically creates a stationary multiple component titration curve or zoned pattern with normalized concentrations of each separated species. An automatic measurement of each zone length yields their quantity. Simultaneous automatic detection of all the zones in a 10–20 component solution in less than 2 minutes, with a precision of ±2%, a required amount of the order of less than one nanomol and a resolution of ±pK < 0.01 replaces acid-base, complexometric, and certain types of redox-titrimetry. An option of the method allows identification of the components as well.