Efficient and Green Approaches for the Synthesis of 4H-Benzo[g]chromenes in Water,Under Neat Conditions,and Using Task-Specific Ionic Liquid

Facile and convenient procedures have been described for the synthesis of 4H-benzo[g]chromenes by one-pot condensation of aromatic aldehydes, malononitrile/ethyl cyanoacetate, and 2-hydroxy-1,4-naphthoquinone. The reaction has been accomplished using catalytic cetyltrimethylammonium bromide (CTAB) in water under reflux or under neat conditions at 110 °C. A task-specific ionic liquid, 1-butyl-3-methyl imidazolium hydroxide ([bmim]OH), has also been found to be an effective catalyst for this transformation. The protocols prove to be environmentally benign and offer advantages of good yields, short reaction times, and simple workup procedures. The ionic liquid could be recycled and reused for up to four runs without appreciable loss in the activity.     

Determination of biogenic amines in lake water by micellar electrokinetic chromatography with fluorescence detection after derivatization with fluorescamine

A simple and rapid method has been developed for the determination of biogenic amines in lake water using micellar electrokinetic chromatography with fluorescence detection. Separation of fluorescamine derivatized biogenic amines was accomplished by using borate buffer of pH 9.5 containing 40 mM of sodium dodecyl sulphate. The method has been optimized with respect to fluorescamine concentration, reaction pH, reaction time, separation voltage and injection time. Detection was performed by using UG-11 excitation filter and 495 nm emission filter. The proposed method for histamine, tyramine and dopamine allowed their separation within 2 min with detection limits in nM range. The interday and intraday reproducibility of peak areas were less than 6.5%. Recovery of spiked samples was 95.76–116.31%.     

Strategic applications of Baylis-Hillman adducts to general syntheses of 3-nitroazetidines

A novel one-pot highly diastereoselective synthesis of substituted 3-nitroazetidines via an anionic domino process is described. The synthesis involves a high yielding annulation of Baylis-Hillman alcohols and their aldehydes with either N-aryl/tosylphosphoramidates or N-aryl/tosylphosphoramidates in combination with a task-specific ionic liquid [bmim][X-Y] to afford the corresponding 1,2,3-tri- and 1,2,3,4-tetrasubstituted azetidines, respectively. Plausible mechanisms for the formation of various 3-nitroazetidines have been suggested.     

Multicomponent reactions and supramolecular catalyst: A perfect synergy for eco-compatible synthesis of pyrido[2,3-d]pyrimidines in water

In this article, we have developed a straightforward, easy and exceedingly competent approach for the synthesis of 5-phenyl-5,6-dihydropyrido[2,3-d]pyrimidine-2,4,7(1H,3H,8H)-triones obtain in superior yields in a sole reaction pace with an air and humidity steady catalyst in water as a green solvent at 100^°C. The present procedure paves the approach for the synthesis of biologically fascinating molecular frameworks and has reward in conditions of little catalyst loading with palpable ambiguous and straightforward-to-do reaction circumstances with easy purification process. The used β-cyclodextrin catalyst was recuperated and repeated several times devoid of noteworthy loss of catalytic activity, which is a crucial parameter of green synthesis.     

First Dual Responsive “Turn-On” and “Ratiometric” AIEgen Probe for Selective Detection of Hydrazine Both in Solution and the Vapour Phase

A new dual responsive “turn-on” and “ratiometric” aggregation-induced emission luminogen (AIEgen) 3-formyl-5-(piperidin-1-yl)biphenyl-4-carbonitrile 6 a (FPBC 6 a ) for selective detection of hydrazine in solution as well as in vapour phase is described. At a low concentration of 2.5 μm , the probe FPBC 6 a is non-fluorescent (turn-off) but remarkably lights up (turn-on with blue emission) in the presence of hydrazine solution (0.25–25 μm ). Interestingly, at higher concentrations, the nanoaggregates of FPBC 6 a (>25 μm , 99 % HEPES in DMSO) displayed ratiometric response in the presence of hydrazine with a remarkable hypsochromic shift from the green (500–550 nm) to blue regions (440–480 nm). Furthermore, a real application of FPBC 6 a was successfully demonstrated through the detection and visualization of hydrazine in live cervical cancer cells as well as using portable test strips.     

Concurrent quantification of oleanolic acid, β-sitosterol and lupeol by a validated high-performance thin-layer chromatography method in Urginea indica Kunth bulb

A validated high-performance thin-layer chromatography (HPTLC) method was developed for the simultaneous quantification of oleanolic acid, β-sitosterol and lupeol in the bulb of Urginea indica Kunth. Separation of metabolites was done in mobile phase using toluene‒ethyl acetate‒methanol‒acetone (7:2:0.2:0.2, V/V) and quantification was done after derivatization by dipping in aninsaldehyde‒sulphuric acid; densitometric scan was performed at 530 nm. The proposed method for quantification was linearly calibrated in the range of 200‒1000 ng/spot for oleanolic acid and β-sitosterol; 100‒500 ng/spot for lupeol, and it was found specific and repeatable. The R_F values were found at 0.44 ± 0.03, 0.55 ± 0.05 and 0.68 ± 0.08, limit of detection and limit of quantification were 1.045, 0.524, 0.525 µg/spot and 3.167, 1.588, 1.592 µg/spot for oleanolic acid, β-sitosterol and lupeol, respectively. Precision and recovery study for sample and standards were within the limit of the International Council for Harmonization guidelines. Oleanolic acid, β-sitosterol and lupeol were found to be 0.113%, 0.105% and 0.036%, respectively, in methanolic extract of plant on dry weight basis. This study will help in checking routine quality control of herbal drugs as well as herbal formulations containing U. indica.

     

Stereoelectronic and dynamical effects dictate nitrogen inversion during valence isomerism in benzene imine

Benzene imine (1) ⇌ 1H-azepine (2) isomerization occurs through sequential valence and endo–exo isomerism. Quantum chemical and quasiclassical trajectory (QCT) simulations reveal the coupled reaction pathway – ring-expansion followed by N-inversion to the most stable isomer, exo-1H-azepine (Exo-2). Direct-dynamics produce a mixture of endo- and exo-1H-azepine stereoisomers and govern the endo-1H-azepine (Endo-2) ⇌ exo-1H-azepine (Exo-2) ratio. Exo-2 is computationally identified as the most stable product while Endo-2 is fleetingly stable with a survival time (S_T) ∼50 fs. N-Methyl substitution exclusively results in an exo-1-methyl-1H-azepine isomer. F-substitution at the N-site increases the barrier for N-inversion and alters the preference by stabilizing Endo-2. Interestingly, the exo-1-fluoro-1H-azepine (minor product) is formed through bifurcation via non-statistical dynamics. A highly concaved Arrhenius plot for 1a → 2a highlights the influence of heavy-atom tunneling on valence isomerism, particularly at low temperatures. Heavy-atom tunneling also results in a normal N–H(D) secondary KIE above 100 K even though the increase in hybridization from sp² to sp³ at nitrogen should cause an inverse KIE classically.

Non-classical processes such as heavy-atom tunneling and post transition-state dynamics govern stereoselectivity for benzene imine ⇌ 1H-azepine.     

An overview of degradation in solid oxide fuel cells-potential clean power sources

Journal of Solid State Electrochemistry - Solid oxide fuel cells (SOFCs) have emerged as the potential power generating devices, being profoundly effective, biofuel-based, and causing negligible...     

Optoelectronic and charge transport properties of the complex of carbon nanotube with perylene bisimide

In the present study we carried out an investigation on the structure and properties of the complex formed by adsorbing perylene bisimide (PBI) on the surface of (6,6) carbon nanotube (CNT) by employing different dispersion-corrected density functionals (B97D, B3LYP-GD3, and ωB97XD), which showed the complex as stable. The contribution of various components of interaction energy follows the order: dispersion > electrostatic > induction. The lower ionization energy of CNT and the higher electron affinity of PBI revealed that they constitute a donor-acceptor system. Electron density distribution of the frontier molecular orbitals of complex confirmed the photoinduced charge transfer. The charge transport properties of the complex indicated higher hole mobility than electron mobility making it suitable to be used as p-type transistor. The absorption spectrum of the complex showed absorption in the near ultraviolet-visible-near infrared regions of the electromagnetic spectrum suggesting it useful for solar cells.