Dihydropyridine-based MCRs. New reaction pathways in the interaction with ethyl glyoxalate and non-aromatic amines

The Lewis acid-catalyzed interaction of dihydropyridines with ethyl glyoxalate and primary aliphatic amines yields, depending on the reaction conditions, bicyclic aminals or rearranged tetrahydropyridines in one-pot multicomponent reactions.     

Equilibrated thermodesorption studies of adsorption of n-hexane and n-heptane on zeolites Y, ZSM-5 and ZSM-11

Gravimetric measurements of thermodesorption of n-hexane and n-heptane were performed under quasi-equilibrium conditions. Differential thermodesorption profiles for ZSM-5 and ZSM-11 showed two peaks, but for Y zeolites, only one thermodesorption peak was observed. A model function, derived from the Langmiur adsorption model, was fitted to the experimental data, and the model parameters (the adsorption entropy and enthalpy) were estimated. The two-step desorption profiles observed for ZSM-5 and ZSM-11 were attributed to the commensurate freezing effect, i.e. a transition in the adsorbed phase resulting in ordering of the adsorbed molecules in the zeolite channels. The results observed for ZSM-11 indicate that the zigzag channels typical for ZSM-5 micropore system are not necessary for this transition to occur.     

Characterization of Cds clusters in zeolite-A grown in alkaline solution

CdS clusters were synthesized in A type zeolite by reaction in alkaline aqueous solution at temperatures from 30 to 70 °C. The optical properties of the samples were studied by diffuse reflectance and photoluminescence spectroscopy. Their crystalline structure and morphology were studied by X-ray diffraction and by transmission and scanning electron microscopy. We found that at lower temperatures the CdS clusters are encapsulated in the zeolite cages. We compared the properties of these clusters with those encapsulated in the cages of zeolites X and Y, prepared by similar methods. CdS clusters smaller than the CdS exciton diameter are also formed outside the cages in the zeolite matrix. The size of these clusters increases with temperature producing a red-shift of the absorption edge in the optical absorption spectra.     

Limits of tangents and minimality of complex links

We show that the complex link of a large class of space germs (X,x₀) is characterized by its “simplicity”, among the Milnor fibres of functions with isolated singularity on X. This amounts to the minimality of the Milnor number, whenever this number is defined. Such a phenomenon has been first pointed out in case (X,x₀) is an isolated hypersurface singularity, by Teissier (Cycles évanescents, sections planes et conditions de Whitney, in: Singularités à Cargèse 1972, Asterisque, Nos. 7 et 8, Soc. Math. France, Paris, 1973, pp. 285-362).     

Photo-induced effect in the layered perovskite manganite La<Subscript>1.2</Subscript>Sr<Subscript>1.8</Subscript>Mn<Subscript>1.8</Subscript>Co<Subscript>0.2</Subscript>O<Subscript>7</Subscript>

It is helpful to study the photo-induced effect in the perovskite manganites not only for elucidating the mechanism of colossal magnetoresistance (CMR) effect but also for potential applications in technology. The laser-induced effect in the Co doping layered perovskite manganites La_1.2Sr_1.8Mn_1.8Co_0.2O₇, is studied in this paper and the obtained results are also compared with that gained in the Nd-doping manganites with cubic perovskite structure.     

The effect of hydrostatic pressure on the ferroelectric phase transition in [NH2(CH3)2]3[Sb2Cl9]

The effect of hydrostatic pressure on the ferroelectric phase transition temperature in [NH₂(CH₃)₂]₃[Sb₂Cl₉] (DMACA) has been studied by electric permittivity measurements at pressures up to 400 MPa. The pressure-temperature phase diagram is given. The phase transition temperature (T_c) increases with increasing pressure up to 150 MPa, passes through a maximum and then decreases with a further increase of pressure. The unexpected nonlinear decrease in T_c with pressure increasing above 150 MPa suggests that the mechanism of ferroelectric phase transition in DMACA is different from hitherto assumed.     

On norms of composition operators acting on Bergman spaces

For arbitrary composition operators acting on a general Bergman space we improve the known lower bound for the norm and also generalize a related recent theorem of D.G. Pokorny and J.E. Shapiro. Next, we obtain a geometric formula for the norms of composition operators with linear fractional symbols, thus extending a result of C. Cowen and P. Hurst and revealing the meaning of their computation. Finally, we obtain a lower bound for essential norm of an arbitrary composition operator related to the well-known criterion of B. MacCluer and J.H. Shapiro. As a corollary, norms and essential norms are obtained for certain univalently induced noncompact composition operators in terms of the minimum of the angular derivative of the symbol.     

A study on the applications of the acoustic design sensitivity analysis of vibrating bodies

The determination of the sensitivity of the acoustical characteristics of vibrating systems with respect to the variation of the design parameters predicting these characteristics is a necessary and important step of the acoustic design and optimization process. Acoustic design sensitivity analysis includes the computation and evaluation of the sensitivity information required for this procedure. In this study, a boundary element code performing the sensitivity analysis of the acoustic pressure by using the matrix sensitivities with respect to different design variables has been developed. The effect of the precision of boundary element discretization on the acoustic pressure sensitivity is examined via this code. The formulation is applied to a multi-source system and the dimension sensitivity analysis of near field pressures of two-dilating-spherical source is performed. The last application is devoted to a real sound source: a washing machine sitting on the floor. Sensitivity of the field pressures to the machine’s dimensions (size), surface velocity and frequency is examined on the bases of the boundary element model of the machine and half-space condition. The impacts of these variables are compared; and a limiting speed for the machine responding both the acoustical and operational requirements is determined.     

Analysis and modeling for time-dependent behavior of polymers exhibited in nanoindentation tests

Through the arrangement of the applied load, experimental nanoindentation results of polymethylmethacrylate (PMMA) and polyurethane (PU) employed to establish a mechanical model. The proposed model consists of irreversible delayed plastic (viscoplastic) deformation, irreversible viscous deformation, and reversible delayed elastic (viscoelastic) deformations. The phase lag exhibited between the responding depth and the oscillating load is found to be linear proportional to frequency in the range of 1-50 Hz. The residual cavity profile of the PMMA scanned by an atomic force microscope gives a validity of accommodation assumption applied in the present model. The effects of overshooting, which occurred in the dwelling process, are also discussed.