Synthesis of Polylactide: Effect of Dispersion of the Initiator

The ring opening polymerization of L-lactide was studied in bulk using stannous octoate as initiator. In some experiments, triphenylphosphine, a Lewis base was also used as co-initiator. The polymerization was carried out at 130°C up to 29 h. The monomer was used after recrystallizing three times with dry toluene. Experiments were carried out using a wide range of monomer to initiator ratio. The averages and distributions of molar masses of resulting PLA have been determined by means of size exclusion chromatography, SEC. It is shown that the (mode, process) procedure of dispersion of the catalyst in polymerization system affects the molar mass distribution of the product as is evidenced by the bimodality or even trimodality observed in the SEC chromatograms.     

Electrochemical production, characterization, and application of MWCNTs

The subject of this study is production of carbon nanotubes (CNTs) using an original procedure of reduction of lithium molten salts onto graphite cathode; their structural characterization and application as support material for electrocatalysts aimed for hydrogen evolution. As-produced CNTs were characterized by means of scanning and transmission electron microscopy (SEM and TEM), Raman spectroscopy, and thermogravimetric and differential thermal analysis (DTA). SEM and TEM images have shown that nanotubes are mostly of curved shape with length of 1–20 μm and diameter of 20–40 nm. Raman peaks indicate that the crystallinity of produced nanotubes is rather low. The obtained results suggest that formed product contains up to 80 % multiwalled carbon nanotubes (MWCNTs), while the rest being non-reacted graphite and fullerenes. DTA curves show that combustion process of the nanotubes takes place in two stages, i.e., at 450 and 720 °C. At the lower temperature, combustion of MWCNTs occurs, while at higher one, fullerenes and non-reacted graphite particles burn. As-produced MWCNTs were used as electrocatalyst’s support materials and their performance was compared with that of traditional carbon support material Vulcan XC-72. MWNTs have shown almost twice higher real surface area, and electrocatalyst deposited on them showed better catalytic activity than corresponding one deposited on Vulcan XC-72.     

An improved SPE method for fractionation and identification of phospholipids

This work reports an efficient and universal SPE method developed for separation and identification of phospholipids derived from complex biological samples. For the separation step, sequential combination of silica gel‐aminopropyl‐silica gel SPE cartridges is applied. This setup enables separation of phosphatidylcholine, lysophosphatidylcholine, phosphatidylethanolamine, phosphatidylglycerol, phosphatidic acid, phosphatidylinositol, phosphatidylserine, cardiolipin, and sphingomyelin into four fractions according to the polarity of their headgroups. Sample acquisition of the SPE fractions is performed by a high‐resolution LC‐MS system consisting of a hybrid linear IT Fourier transform ion cyclotron resonance mass spectrometer coupled to RP‐HPLC. The unequivocal advantage of our SPE sample preparation setup is avoidance of analyte peak overlapping in the determination step done by RP‐HPLC. Overlapping phospholipid signals would otherwise exert adverse ion suppression effects. An additional benefit of this method is the elimination of polar and nonpolar (e.g. neutral lipids) contaminants from the phospholipid fractions, which highly reduces contamination of the LC‐MS system. The method was validated with fermentation samples of organic waste, where 78 distinct phospholipid and sphingomyelin species belonging to six lipid classes were successfully identified.     

Improved Procedure for the Synthesis of DAMGO

A short and straightforward synthesis of DAMGO is described.     

Short,Convenient Preparative Procedures for 7-Isopropylidenenorbornane, 7-Isopropylidenenorbornene,and 7-Isopropylidenenorbornadiene

Short synthetic routes to the title compounds 1,–3, from readily available Diels-Alder adduct 5 of 6,6-dimethylfulvene and acrylonitrile are described.     

Heteropoly Acids as Heterogeneous and Reusable Catalyst for α-Thiocyanation of Ketones

Simple, efficient, and mild method for α-thiocyanation of ketones in presence of heteropolyacid has been developed. This methodology offered α-oxothiocyanates in good to excellent yields at room temperature in a highly selective manner. The catalyst could be efficiently recovered from the reaction and reused.     

Synthesis of 1,4,5-trisubstituted-1,2,3-triazoles via coupling reaction of diaminomaleonitrile with aromatic diazonium salts

A mild procedure for the preparation of 2-(5-amino-1-aryl-1H-1,2,3-triazol-4-yl)-2-iminoacetonitriles and 2-(5-amino-1-aryl-1H-1,2,3-triazol-4-yl)-2-oxoacetonitriles was achieved by the reaction of diaminomaleonitrile and phenyl/substituted phenyl diazonium chlorides. 4-Nitrophenyl diazonium chloride afforded 2-amino-3-(3-(4-nitrophenyl)triaz-1-en-1-yl)maleonitrile. Triazole iminoacetonitrile and maleonitrile derivatives were reacted further with excess acetone and benzaldehyde with a catalytic amount of 1,8-diazabicyclo[5.4.0]undec-7-ene to yield 5-(5-imino-2,2-dimethyl-2,5-dihydrooxazol-4-yl)-3-aryl-3H-1,2,3-triazol-4-amine and (E)-N-benzylidene-5-(5-imino-2-aryl-2,5-dihydrooxazol-4-yl)-3-aryl-3H-1,2,3-triazol-4-amine, respectively. Two competitive reactions, i.e., nucleophilic substitution and nucleophilic addition, were observed when triazole oxoacetonitrile and maleonitrile derivatives were reacted with hydroxylamine hydrochloride in the presence of sodium acetate.     

Investigation of steric and electronic effects in the copper-catalysed asymmetric oxidation of sulfides

Steric and electronic effects in the copper-catalysed asymmetric oxidation of aryl benzyl, aryl alkyl and alkyl benzyl sulfides have been investigated. The presence of an aryl group directly attached to the sulfur is essential to afford sulfoxides with high enantioselectivities, with up to 97% ee for 2-naphthyl benzyl sulfoxide, the highest enantioselectivity achieved to date for copper-catalysed asymmetric sulfoxidation. In contrast, the benzyl substituent can be replaced by sterically comparable groups with no effect on enantioselectivity. Copper-mediated oxidation of substituted aryl benzyl sulfides display modest steric and electronic effects resulting in comparable or lower enantioselectivities to those obtained with the unsubstituted benzyl phenyl sulfide.     

Synthesis,Characterization, and Possible Applications of ZnO Nanocrystals

ZnO nanocrystals are synthesized using the quenching method. The properties of the grown nanocrystals are studied using ultraviolet-vis spectroscopy, x-ray diffraction, photoluminescence, electron diffraction, energy dispersive x-ray spectroscopy, and high resolution transmission electron microscopy. Current-voltage characteristics of the prepared samples are studied for investigating the possible application of the samples as switch and memristor.     

Effect of Botanical Extracts on the Growth and Nutritional Quality of Field-Grown White Head Cabbage (Brassica oleracea var. capitata)

Nutraceuticals and functional foods are gaining more attention amongst consumers interested in nutritious food. The consumption of foodstuffs with a high content of phytochemicals has been proven to provide various health benefits. The application of biostimulants is a potential strategy to fortify cultivated plants with beneficial bioactive compounds. Nevertheless, it has not yet been established whether the proposed higher plants (St. John’s wort, giant goldenrod, common dandelion, red clover, nettle, and valerian) are appropriate for the production of potential bio-products enhancing the nutritional value of white cabbage. Therefore, this research examines the impact of botanical extracts on the growth and nutritional quality of cabbage grown under field conditions. Two extraction methods were used for the production of water-based bio-products, namely: ultrasound-assisted extraction and mechanical homogenisation. Bio-products were applied as foliar sprays to evaluate their impact on total yield, dry weight, photosynthetic pigments, polyphenols, antioxidant activity, vitamin C, nitrates, micro- and macroelements, volatile compounds, fatty acids, sterols, and sugars. Botanical extracts showed different effects on the examined parameters. The best results in terms of physiological and biochemical properties of cabbage were obtained for extracts from common dandelion, valerian, nettle, and giant goldenrod. When enriched with nutrients, vegetables can constitute a valuable component of functional food.