Oxidation of cyclohexane with molecular oxygen using a Schiff base cobalt complex bonded to carbamate-modified silica gel

The Schiff base [1,2-bis(salicylidene amino)phenylene]cobalt(II) complex, chemically bonded to a carbamate-modified silica gel catalyst, has been prepared by a four step procedure. The oxidation of cyclohexane was studied in the presence of this catalyst under relatively mild conditions (150–200 °C, 15–20 atm) using molecular oxygen. The catalyst was found to be very selective for the production of cyclohexanol, with cyclohexanone formed in only a small amount (45:1). This is in contrast to the commercially available processes in which cyclohexanol and cyclohexanone are both formed in appreciable amounts. The t.g.a. analysis shows the catalyst to be stable up to 211 °C and atomic absorption spectroscopy indicated negligible metal loss during 50 h use of the catalyst up to 180 °C.     

3-Nitro-2-naphthalenemethanol: a photocleavable protecting group for carboxylic acids

Photocleavable protecting groups are important in synthesis and caging. Among many such groups, 2-nitrobenzyl and related groups have been found useful in many applications. However, most of the known 2-nitrobenzyl-based caging chromophores show either low quantum yield or the photolysis wavelength is not suitable for various applications. In this paper, we report 2-nitro-3-naphthalenemethanol (NNM) as an efficient photocleavable protecting group for molecules containing a carboxylic function. NNM possesses photochemical properties better than the 2-nitrobenzyl chromophores as it is photoactivatable at 380 nm in aqueous medium (CH₃CN/H₂O, 3:2 v/v) showing the desired photochemistry. The carboxylic acids are efficiently photoreleased from NNM-based esters in almost quantitative yield.     

Is collision-induced dissociation of low-energy carbonyl sulfide cations adversely affected by asymmetry?

We have measured relative abundances of fragment ions resulting from collision-induced dissociation of OCS(+) ions in collision with xenon neutrals as a function of ion kinetic energy and scattering angle. The lowest energy dissociation product, S(+), dominates at all energies up to 53 eV kinetic energy studied here. Surprisingly, the second most abundant dissociation channel is CS(+) and not CO(+) even though the thermochemical threshold for CO(+) is lower than that for CS(+) and CO(+) is more abundant than CS(+) in the normal mass spectrum of OCS. We do not observe any significant abundance of CO(+) in this energy range, suggesting that collision-induced excitation and dissociation of OCS(+) is significantly different to that of symmetric triatomic ions. A possible role of asymmetry in the molecular ion's collisional activation via neutral collision is suggested for the different behavior.     

Synthesis of 3‐(substituted)‐2,4,8,15‐tetroxa‐3‐phosphadispiro[5.2.5]hexadecane‐3‐oxides

Novel 3‐(substituted)‐2,4,8,15‐tetroxa‐3‐phosphadispiro[5.2.5]hexadecane‐3‐oxides (3‐12) have been synthesized by cyclization of 1,5‐dioxaspiro[5.5]undecande‐3,3‐dimethanol (1) with various substituted aryl phosphorus dichloridates (2) in dry toluene‐THF in the presence of triethylamine at 40‐60 ^oC. Their molecular structures were determined by ir, nmr and mass spectral studies and were screened for antifungal activity against Curvularia lunata and Aspergillus niger, and antibacterial activity on Staphylococcus aureus and Escherichia coli. Most of them possess significant activity.     

Some chemistry of mixed ligand complexes of platinum

Simple synthetic routes to the mixed ligand complexes PtLL'X₂ and PtLL'XY (L' = PEt₃; L = phosphine, arsine, etc.; X = Cl and Y = Cl, H or Me) are described; unexpectedly, these display an extensive chemistry without disproportionation, although in some cases ligand scrambling does occur.     

Tailoring approach for exploring electron densities and electrostatic potentials of molecular crystals

Experimental and theoretical studies of electron densities and the corresponding derived entities such as electrostatic potentials have been the primary means of understanding the chemical nature and electronic properties of crystalline substances. Conventional crystal calculation methods such as the embedded cluster models are capable of performing calculations on small and medium-sized molecules, while periodic ab initio methods can treat crystals with up to 200 atoms per unit cell. A linear scaling method, viz. the molecular tailoring approach, has recently been developed for obtaining ab initio quality one-electron properties. In the present study, the molecular tailoring approach is employed to generate electron density, electrostatic potential and interaction density maps with the ibuprofen crystal as a test case. The interaction density and electrostatic potential maps produced in the present work succinctly bring out the actual crystalline environment around a given reference molecule by including the interactions with atoms in its neighborhood. The results obtained from the molecular tailoring approach may thus be expected to enhance our understanding of the environment in the crystalline material with reasonably small computational effort.Contribution to the Jacopo Tomasi Honorary Issue     

Asymmetric synthesis of 2,3-dihydrofurans and of unsaturated bicyclic tetrahydrofurans through alpha-elimination and migratory cyclization of silyloxy alkenyl aminosulfoxonium salts. Generation and intramolecular O,Si-bond insertion of chiral disubstituted beta-silyloxy alkylidene carbenes

Treatment of the bis(allylsulfoximine)titanium complexes derived from the beta-methyl-substituted acyclic allylic sulfoximines 13a and 13b with aldehydes gave with high selectivities the corresponding sulfoximine-substituted homoallylic alcohols which were isolated as the silyl ethers 15a-h. Methylation of sulfoximines 15a-h afforded the aminosulfoxonium salts 5a-h which upon treatment with LiN(H)tBu gave in high yields the enantio- and diastereomerically pure silyl-substituted 2,3-dihydrofurans 4a-h. Treatment of the titanium complexes derived from the cyclic allylic sulfoximines 17a, 17b, and ent-17c with p-MeOC(6)H(4)CHO delivered with high selectivities the corresponding sulfoximine-substituted cyclic homoallylic alcohols which were isolated as the silyl ethers 18a, 18b, and ent-18c, respectively. Methylation of sulfoximines 18a, 18b, and ent-18c furnished the aminosulfoxonium salts 8a, 8b, and ent-8c, respectively, whose treatment with LiN(H)t-Bu gave the enantio- and diastereomerically pure fused bicyclic 2,3-dihydrofurans 6a, 6b, and ent-6c, respectively, in good yields. It is proposed that the 1-alkenyl aminosulfoxonium salts 5a-h, 8a, 8b, and ent-8c react with the base under alpha-elimination and formation of the acyclic and cyclic beta-silyloxy alkylidene carbenes 2a-h, 7a, 7b, and ent-7c, respectively, which then undergo a 1,5-O,Si-bond insertion and 1,2-silyl migration. The cyclic aminosulfoxonium salts 8a, 8b, and ent-8c upon treatment with 1,8-diazabicyclo[5.4.0]-7-undecene did not undergo an alpha-elimination but suffered a novel migratory cyclization with formation of the enantio- and diastereomerically pure bicyclic tetrahydrofurans 9a, 9b, and ent-9c, respectively. It is proposed that the 1-alkenyl sulfoxonium salts 8a, 8b, and ent-8c are isomerized to the allylic aminosulfoxonium salts 10a, 10b, and ent-10c, respectively, which then suffer an intramolecular substitution of the (dimethylamino)sulfoxonium group by the silyloxy group followed by a desilylation. The syntheses of the 2,3-dihydrofurans 4a-h, 6a, and 6b and of the tetrahydrofurans 9a and 9b are accompanied by the formation of sulfinamide 16 of >or=98% ee, which can be converted via sulfoxide 28 of >or=98% to the starting sulfoximine 11 of >or=98% ee.     

Products active on mosquitoes,IV: Synthesis and biological activity of 8-propargyloxy-3,7-dimethyl-2,6-octadienyl/6-octenyl ethers

Summary A series of 8-proparglyoxy-3,7-dimethyl-2,6-octadienyl and 8-propargyloxy-3,7-dimethyl-6-octenyl ethers were prepared from 8-hydroxygeranyl and 8-hydroxycitronellyl ethers, respectively. Almost all compounds showed high toxicity toCulex quinquefaciatus larvae at 1 mgl^–1 dose level.

---

Gegen Mücken aktive Produkte, 4. Mitt.: Synthese und biologische Aktivität von 8-Propargyloxy-3,7-dimethyl-2,6-octadienyl/6-octenyl-ethern

Zusammenfassung Eine Reihe von 8-Propargyloxy-3,7-dimethyl-2,6-octadienyl- und 8-propargyloxy-3,7-dimethyl-6-octenyl-ethern wurden aus 8-Hydroxygeranyl- bzw. 8-Hydroxycitronellyl-ethern hergestellt. Fast alle Verbindungen zeigten hoch Toxizität gegenüber Larven vonCulex quinquefaciatus in einer Dosierung von 1 mgl^–1.

     

Studies on crosslinking of EPDM-PE blends by thermoanalytical techniques

The effect of blend ratio and peroxide concentration on crosslinking characteristics of EPDM-PE blends were studied by Differential Scanning Calorimetry, Brabender plasticorder and Rheometer. Crosslinking of EPDM-PE blends follows first order reaction kinetics. The curing exotherm increases but activation energy decreases with increase in EPDM content in the blends. The same however increases with the increase in concentration of DCP upto a certain level, while the activation energy is almost independent of peroxide concentration. The cure rate increases whereas optimum cure time and energy consumption for curing decrease with increase in the EPDM-PE ratio. A method for determination of crosslinking efficiency in the case of blend systems was developed from high temperature modulus to predict the properties and the curing behaviour of the blends.

---

Zusammenfassung Mittels DSC, Brabender Plasticorder und Rheometer wurde der Einfluß von Mischungsverhältnis und Peroxidkonzentration auf den Vernetzungsverlauf von EPDM-PE-Gemischen untersucht. Die Vernetzung von EPDM-PE-Gemischen verläuft nach einer Reaktion erster Ordnung. Je höher der Anteil von EPDM im Gemisch, um so exothermer ist die Vernetzung und um so kleiner ist die dazugehörige Aktivierungsenergie. Mit dem Anwachsen der DCP-Konzentration bis zu einem gewissen Niveau wächst der exotherme Charakter, während die Aktivierungsenergie fast unabhängig von der Peroxidkonzentration ist. Mit dem Anstieg des EPDM/PE-Verhältnisses wächst die vernetzungsgeschwindigkeit, während die optimale Vernetzungszeit und der Energieverbrauch für die Vernetzung sinken. Es wurde ein Verfahren zur Bestimmung der Vernetzungseffizienz bei Mischsystemen entwickelt, um Eigenschaften und Vernetzungsverhalten von Gemischen voraussagen zu können.

     

Rapid extraction of copper(II) with 2-thenoyltrifluoroacetone direct colorimetric determination in the organic phase

Summary The chelating agent, 2-thenoyltrifluoroacetone has been employed for rapid extraction and colorimetric determination of milligram amounts of copper(II) in one operation. At pH 2.4–6.0 copper(II) is extracted quantitatively from an aqueous solution by TTA-benzene in a single extraction. The green-coloured copper(II)-TTA chelate solution in benzene obeysBeer's law at 430 m over the range of 16–180g copper per millilitre. The coloured system is stable for 143 hours. It can tolerate silver, mercury(II), bismuth (<5 mg) and small amounts (<100 mg) of citrate and tartrate, whereas cobalt(II), nickel(II), iron(III), aluminium(III), cerium(IV), thorium and zirconium seriously interfere. The proposed method is reproducible to within ±1.4%.