Cannabis-Derived Compounds Cannabichromene and Δ9-Tetrahydrocannabinol Interact and Exhibit Cytotoxic Activity against Urothelial Cell Carcinoma Correlated with Inhibition of Cell Migration and Cytoskeleton Organization

Cannabis sativa contains more than 500 constituents, yet the anticancer properties of the vast majority of cannabis compounds remains unknown. We aimed to identify cannabis compounds and their combinations presenting cytotoxicity against bladder urothelial carcinoma (UC), the most common urinary system cancer. An XTT assay was used to determine cytotoxic activity of C. sativa extracts on T24 and HBT-9 cell lines. Extract chemical content was identified by high-performance liquid chromatography (HPLC). Fluorescence-activated cell sorting (FACS) was used to determine apoptosis and cell cycle, using stained F-actin and nuclei. Scratch and transwell assays were used to determine cell migration and invasion, respectively. Gene expression was determined by quantitative Polymerase chain reaction (PCR). The most active decarboxylated extract fraction (F7) of high-cannabidiol (CBD) C. sativa was found to contain cannabichromene (CBC) and Δ9-tetrahydrocannabinol (THC). Synergistic interaction was demonstrated between CBC + THC whereas cannabinoid receptor (CB) type 1 and type 2 inverse agonists reduced cytotoxic activity. Treatments with CBC + THC or CBD led to cell cycle arrest and cell apoptosis. CBC + THC or CBD treatments inhibited cell migration and affected F-actin integrity. Identification of active plant ingredients (API) from cannabis that induce apoptosis and affect cell migration in UC cell lines forms a basis for pre-clinical trials for UC treatment.     

Towards a microchannel‐based X‐ray detector with two‐dimensional spatial and time resolution and high dynamic range

X‐ray detectors that combine two‐dimensional spatial resolution with a high time resolution are needed in numerous applications of synchrotron radiation. Most detectors with this combination of capabilities are based on semiconductor technology and are therefore limited in size. Furthermore, the time resolution is often realised through rapid time‐gating of the acquisition, followed by a slower readout. Here, a detector technology is realised based on relatively inexpensive microchannel plates that uses GHz waveform sampling for a millimeter‐scale spatial resolution and better than 100 ps time resolution. The technology is capable of continuous streaming of time‐ and location‐tagged events at rates greater than 10⁷ events per cm². Time‐gating can be used for improved dynamic range.     

The water‐promoted Diels–Alder reaction in quaternary ammonium salts

Prevailing classification of salts based on their effect in solubility and stability of proteins in aqueous solution predicts that tetraalkylammonium salts, guanidinium chloride (GnCl), LiClO₄ act as salting‐in (S/I) and LiCl, NaCl act as salting‐out (S/O) in aqueous conditions. In the same context the behaviour of GnCl, LiClO₄ and LiCl are contradictory in polar solvents like ethylene glycol and formamide. In these solvents, expected salt effect shows just opposite nature from their usual expectation. However, in the aqueous solution salts like tetraalkylammonium halide (R₄NX, R = alkyl group, X = Br group) behave like salting‐in salts. The physicochemical origin of the salting in effect of R₄NX type of salts has been discussed elaborately in the present work. The role of cations in terms of substitution of various alkyl groups on R₄NX has been systematically presented here on the basis of experimental kinetic and thermodynamic studies. The abnormal behaviour of R₄NX salts in aqueous solution has also been explained by the Setschenov equation (k_s) and Δμ_solvation values, which highlights their individual nature out of common properties of R₄NX. Copyright © 2015 John Wiley & Sons, Ltd.     

Structurally Stabilized Organosilane‐Templated Thermostable Mesoporous Titania

Structurally thermostable mesoporous anatase TiO₂ (m‐TiO₂) nanoparticles, uniquely decorated with atomically dispersed SiO₂, is reported for the first time. The inorganic Si portion of the novel organosilane template, used as a mesopores‐directing agent, is found to be incorporated in the pore walls of the titania aggregates, mainly as isolated sites. This is evident by transmission electron microscopy and high‐angle annular dark field scanning transmission electron microscopy, combined with electron dispersive X‐ray spectroscopy. This type of unique structure provides exceptional stability to this new material against thermal collapse of the mesoporous structure, which is reflected in its high surface area (the highest known for anatase titania), even after high‐temperature (550 °C) calcination. Control of crystallite size, pore diameter, and surface area is achieved by varying the molar ratios of the titanium precursor and the template during synthesis. These mesoporous materials retain their porosity and high surface area after template removal and further NaOH/HCl treatment to remove silica. We investigate their performance for dye‐sensitized solar cells (DSSCs) with bilayer TiO₂ electrodes, which are prepared by applying a coating of m‐TiO₂ onto a commercial titania (P25) film. The high surface area of the upper mesoporous layer in the P25–m‐TiO₂ DSSC significantly increases the dye loading ability of the photoanode. The photocurrent and fill factor for the DSSC with the bilayer TiO₂ electrode are greatly improved. The large increase in photocurrent current (ca. 56 %) in the P25–m‐TiO₂ DSSC is believed to play a significant role in achieving a remarkable increase in the photovoltaic efficiency (60 %) of the device, compared to DSSCs with a monolayer of P25 as the electrode.     

A Fluorescent and Colorimetric Sensor for Nanomolar Detection of Co2+ in Water

A new disulfide‐based, imine‐linked fluorescent receptor 1 was processed into organic nanoparticles (ONPs) with an average particle size of 79 nm. The photophysical properties of the ONPs were evaluated by UV/Vis absorption spectroscopy. Receptor 1 selectively recognized Co²⁺ ions in water with a detection limit down to 88 nm.     

Invoking Pairwise Interactions in Water‐Promoted Diels–Alder Reactions by using Ionic Liquids as Cosolvents

Rate constants and derived activation parameters of organic reactions in aqueous media, in particular Diels–Alder reactions, are sensitive to the presence of cosolvents in water. To enhance the solubility window of water, we introduced ionic liquids as cosolvents in the aqueous Diels–Alder reaction between anthracene‐9‐carbinol and N‐ethylmaleimide. The reactive potentials of the organic compounds are parameterized by using semi‐empirical quantum chemical methods. The principle of Savage–Wood additivity of group interactions is used to quantify the pairwise group interactions among chemically inert ionic liquids and organic reactants, both at initial and transition states of the reaction. The present approach shows promise, as the use of simple calculations from easily available kinetic data can help researchers to understand the versatility of green ionic‐liquid alternatives to volatile organic solvents.     

Synthesis,characterization and antioxidant activity of bis (arylsulfonylmethyl/arylaminosulfonylmethylazolyl) pyridines

A new class of bis(arylsulfonylmethylazolyl)pyridines and bis(arylaminosulfonylmethyl-azolyl)pyridines were synthesized from the synthetic intermediates methyl arylsulfonylacetic acid hydrazide and methyl arylaminosulfonylacetic acid hydrazide adopting a green methodology-ultrasonication. All the synthesized compounds were resulted in higher yield and in shorter reaction times. The spectral parameters such as IR, ¹H NMR, ¹³C NMR, mass and microanalyzes were used to determine the structures of all the synthesized compounds and were assayed for antioxidant activity. The bis(arylaminosulfonylmethylazolyl)pyridines showed higher radical scavenging activity than the bis(arylsulfonylmethylazolyl)pyridines. Besides, unsubstituted, and methyl substituted compounds exhibited greater activity. Among all the tested compounds 8b and 11b were identified as potential antioxidants.     

3D-printed electrochemical sensors: A new horizon for measurement of biomolecules

Electrochemical sensors are widely used to monitor biomolecules. However, limitations in sensor geometry have restricted the scope of currently used electrochemical sensors. 3D-printing has emerged as a promising manufacturing approach, to robustly make electrochemical sensors, that can stably measure in biological environments. This review highlights the recent trends in the development of 3D-printed electrodes and biosensors for measurement of biomolecules. Novel geometries of 3D-printed electrodes have provided the means to conduct ex vivo measurement in the intestinal tract and in vivo measurements in the brain. 3D-printing is providing the ability to manufacture electrochemical sensors that can measure biomolecules in diverse areas of the body.     

Shock Processing of Amino Acids Leading to Complex Structures—Implications to the Origin of Life

The building blocks of life, amino acids, are believed to have been synthesized in the extreme conditions that prevail in space, starting from simple molecules containing hydrogen, carbon, oxygen and nitrogen. However, the fate and role of amino acids when they are subjected to similar processes largely remain unexplored. Here we report, for the first time, that shock processed amino acids tend to form complex agglomerate structures. Such structures are formed on timescales of about 2 ms due to impact induced shock heating and subsequent cooling. This discovery suggests that the building blocks of life could have self-assembled not just on Earth but on other planetary bodies as a result of impact events. Our study also provides further experimental evidence for the ‘threads’ observed in meteorites being due to assemblages of (bio)molecules arising from impact-induced shocks.