纤维改性硫氧镁基仿木保温材料性能研究

为了提高硫氧镁基仿木保温材料的各项性能, 分别研究了相同长度的聚丙烯纤维(PPF)、聚乙烯醇纤维(PVAF)、玻璃纤维(GF)对其性能的影响. 结果表明: 随着纤维掺量的增加, 硫氧镁基仿木保温材料的流动性有所降低; GF对其抗压抗折强度的提高效果最明显, 其中GF掺量为1.0 kg·m^-3时早期抗压强度最高, PVAF掺量为0.5 kg·m^-3时其早期抗压强度最高; PPF明显提高了硫氧镁基仿木保温材料的耐水性, 其掺量为0.5 kg·m^-3时软化系数最大, 而GF掺量在1.0 kg·m^-3时, 浸水软化系数稍高于未加纤维的对比试件; 掺加PVAF后硫氧镁基保温材料的导热系数出现一定程度的降低, 其中PVAF掺量在1.5 kg·m^-3时其导热系数最低. GF和PPF可以明显地降低硫氧镁基仿木保温材料的收缩值, 其中GF降低自收缩效果较好, 而PPF可以明显地降低其干燥收缩值.     

茂钇-铝双金属配合物催化甲基丙烯酸甲酯立规聚合

立规聚合;茂稀土催化剂;稀土;茂钇-铝双金属配合物催化甲基丙烯酸甲酯立规聚合     

烯烃聚合高性能FI催化剂的进展

FI催化剂系一近几年发展起来的烯烃聚合高性能催化剂。以它的极高的活性、聚合物分子结构的可控性、多重活性聚合等特性而引人注目。本评述首先进行该催化剂的化学描述,然后分别介绍该催化剂的主要特征、活性中心结构、聚合机理和应用,重点介绍该催化剂的五大特征。     

Statistical theory for hydrogen bonding fluid system of A_aD_d type (I): The geometrical phase transition

The influence of hydrogen bonds on the physical and chemical properties of hydrogen bonding fluid system of AaDd type is investigated from two viewpoints by the principle of statistical mechanics. In detail, we proposed two new ways that can be used to obtain the equilibrium size distribution of the hydrogen bonding clusters, and derived the analytical expression of a relationship between the hydrogen bonding free energy and hydrogen bonding degree. For the nonlinear hydrogen bonding systems, it is shown that the sol-gel phase transition can take place under proper conditions, which is further proven to be a kind of geometrical phase transition rather than a thermodynamic one. Moreover, several problems associated with the geometrical phase transition and liquid-solid phase transition in nonlinear hydrogen bonding systems are discussed.     

Iteration of transmit-beam aberration correction in medical ultrasound imaging

Simulations of iterative transmit-beam aberration correction using a time-delay and amplitude filter have been performed to study the convergence of such a process. Aberration in medical ultrasonic imaging is usually modeled by arrival-time and amplitude fluctuations concentrated on the transducer array. This is an approximation of the physical aberration process, and may be applied to correct the transmitted signal using a time-delay and amplitude filter. Estimation of such a filter has proven difficult in the presence of severe aberration. Presented here is an iterative approach, whereby a filter estimate is applied to correct the transmit-beam. This beam induces acoustic backscatter better suited for arrival-time and amplitude estimation, thus facilitating an improved filter estimate. Two correlation-based methods for estimating arrival-time and amplitude fluctuations in received echoes from random scatterers were employed. Aberration was introduced using eight models emulating aberration produced by the human abdominal wall. Results show that only a few iterations are needed to obtain corrected transmit-beam profiles comparable to those of an ideal aberration correction filter. Furthermore, a previously developed focusing criterion is found to quantify the convergence accurately.     

光场横向效应导致CO2激光器混沌运转的实验研究

对横向效应导致单纵模多横模CO_2激光器失稳进行了实验研究.观测到了经各种途径到达的激光混沌态,并对其物理机制进行了探讨.     

Eigenfunction analysis of stochastic backscatter for characterization of acoustic aberration in medical ultrasound imaging

Presented here is a characterization of aberration in medical ultrasound imaging. The characterization is optimal in the sense of maximizing the expected energy in a modified beamformer output of the received acoustic backscatter. Aberration correction based on this characterization takes the form of an aberration correction filter. The situation considered is frequently found in applications when imaging organs through a body wall: aberration is introduced in a layer close to the transducer, and acoustic backscatter from a scattering region behind the body wall is measured at the transducer surface. The scattering region consists of scatterers randomly distributed with very short correlation length compared to the acoustic wavelength of the transmit pulse. The scatterer distribution is therefore assumed to be delta correlated. This paper shows how maximizing the expected energy in a modified beamformer output signal naturally leads to eigenfunctions of a Fredholm integral operator, where the associated kernel function is a spatial correlation function of the received stochastic signal. Aberration characterization and aberration correction are presented for simulated data constructed to mimic aberration introduced by the abdominal wall. The results compare well with what is obtainable using data from a simulated point source.     

Estimation of ultrasound wave aberration with signals from random scatterers

A method for estimating waveform aberration from random scatterers in medical ultrasound imaging has been derived and its properties investigated using two-dimensional simulations. The method uses a weighted and modified cross-spectrum in order to estimate arrival time and amplitude fluctuations from received signals. The arrival time and amplitude fluctuations were used in a time delay, and a time delay and amplitude aberration correction filter, for evaluation of the retransmitted aberration corrected signal. Different types of aberration have been used in this study. First, aberration was concentrated on the plane of the transmitting/receiving array. Second, aberration was generated with a distributed aberrator. Both conditions emulated aberration from the human abdominal wall. Results show that for the concentrated aberrator, arrival time and amplitude fluctuations were estimated in close agreement with reference values. The reference values were obtained from simulations with a point source in the focal point of the array. Correction of the transmitted signal with a time delay, and a time delay and amplitude filter produced approximately equal correction as with point source estimates. For the distributed aberrator, the estimator performance degraded significantly. Arrival time and amplitude fluctuations deviated from reference values, leading to a limited correction of the retransmitted signal.     

Af型自由基均聚反应的固化理论(Ⅲ)──高分子凝胶网络缺陷

应用高分子反应统计理论,分析了高分子网络的形成过程,讨论了A_f型自由基均聚反应凝胶网络中的缺陷悬吊环的数目及其形成几率.