Manifestation of thermodynamic glass transition by structure and picosecond dynamics in alkali tellurite glasses

The Raman spectra of the 0.1Cs₂O–0.9TeO₂ melt were measured and analyzed over a broad temperature range including the glassy, supercooled and molten state in an effort to follow the varying structural and dynamical aspects caused by temperature and alkali modifier. The network structure of the glass/melt is formed by mixing TeO₄ trigonal bipyramid and TeO₃ trigonal pyramid units. Changing alkali content and/or temperature results to conversion of the TeO₄ units to TeO₃ units with a varying number of non-bridging oxygen atoms. The low-frequency Raman spectra reveal a well-resolved Boson peak whose frequency also depends on temperature. The variation of the maximum of the Boson peak has been determined and discussed in the framework of current phenomenological models. The short-time dynamics of the system experiences drastic changes when approaching the glass-to-liquid transition. The temperature dependent plot of the correlation times extrapolates to a crossover value, which we assign as spectral evidence of the system's known thermodynamic glass transition temperature. Similar behavior exhibit several spectral features, such as the maximum of the Boson peak, the exponent of the susceptibility and the intensity ratio related to the structural transformation from TeO₄ tbp to TeO₃ tp species occurring in the medium range order structure.     

Density oscillations in a nanoscale water film on salt: insight from ab initio molecular dynamics

The salt-water interface is one of the most important and common on earth, playing a prominent role in disciplines such as atmospheric science and biology. Despite the apparent simplicity of such interfaces, arguably the most fundamental question of what the nature and structure of the liquid water/salt interface is under ambient conditions remains unclear. Here we address this issue with an ab initio molecular dynamics simulation of a nanoscale liquid water film on NaCl. A pronounced layering is observed in the film, with the density exhibiting a damped oscillatory behavior in the direction of the surface normal. In addition, water molecules in the contact layer are preferentially adsorbed at specific adsorption sites, involved in about 20% fewer hydrogen bonds with each other, and carry considerably reduced dipole moments compared to bulk liquid water.     

On the accuracy of density-functional theory exchange-correlation functionals for H bonds in small water clusters: benchmarks approaching the complete basis set limit

The ability of several density-functional theory (DFT) exchange-correlation functionals to describe hydrogen bonds in small water clusters (dimer to pentamer) in their global minimum energy structures is evaluated with reference to second order Moller-Plesset perturbation theory (MP2). Errors from basis set incompleteness have been minimized in both the MP2 reference data and the DFT calculations, thus enabling a consistent systematic evaluation of the true performance of the tested functionals. Among all the functionals considered, the hybrid X3LYP and PBE0 functionals offer the best performance and among the nonhybrid generalized gradient approximation functionals, mPWLYP and PBE1W perform best. The popular BLYP and B3LYP functionals consistently underbind and PBE and PW91 display rather variable performance with cluster size.     

Connected but not path-connected subspaces of infinite graphs

Solving a problem of Diestel [9] relevant to the theory of cycle spaces of infinite graphs, we show that the Freudenthal compactification of a locally finite graph can have connected subsets that are not path-connected. However we prove that connectedness and path-connectedness to coincide for all but a few sets, which have a complicated structure.     

Qualitative and quantitative analysis of pyrolysis oil by gas chromatography with flame ionization detection and comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry

Pyrolysis oils have attracted a lot of interest, as they are liquid energy carriers and general sources of chemicals. In this work, gas chromatography with flame ionization detector (GC-FID) and two-dimensional gas chromatography with time-of-flight mass spectrometry (GC×GC-TOFMS) techniques were used to provide both qualitative and quantitative results of the analysis of three different pyrolysis oils. The chromatographic methods and parameters were optimized and solvent choice and separation restrictions are discussed. Pyrolysis oil samples were diluted in suitable organic solvent and were analyzed by GC×GC-TOFMS. An average of 300 compounds were detected and identified in all three samples using the ChromaToF (Leco) software. The deconvoluted spectra were compared with the NIST software library for correct matching. Group type classification was performed by use of the ChromaToF software. The quantification of 11 selected compounds was performed by means of a multiple-point external calibration curve. Afterwards, the pyrolysis oils were extracted with water, and the aqueous phase was analyzed both by GC-FID and, after proper change of solvent, by GC×GC-TOFMS. As previously, the selected compounds were quantified by both techniques, by means of multiple point external calibration curves. The parameters of the calibration curves were calculated by weighted linear regression analysis. The limit of detection, limit of quantitation and linearity range for each standard compound with each method are presented. The potency of GC×GC-TOFMS for an efficient mapping of the pyrolysis oil is undisputable, and the possibility of using it for quantification as well has been demonstrated. On the other hand, the GC-FID analysis provides reliable results that allow for a rapid screening of the pyrolysis oil. To the best of our knowledge, very few papers have been reported with quantification attempts on pyrolysis oil samples using GC×GC-TOFMS most of which make use of the internal standard method. This work provides the ground for further analysis of pyrolysis oils of diverse sources for a rational design of both their production and utilization process.     

Hydrogen-bonded assembly of methanol on Cu(111)

Investigation of methanol's surface chemistry on metals is a crucial step towards understanding the reactivity of this important chemical feedstock. Cu is a relevant metal for methanol synthesis and reforming, but due to the weak interaction of methanol with Cu, an atomic scale view of methanol's coverage-dependent ordering and self-assembly on Cu(111), the most abundant facet of most nanoparticles, has not yet been possible. Low and variable temperature scanning tunneling microscopy coupled with density functional theory reveal a coverage-dependent range of highly ordered structures stabilized by two hydrogen bonds per molecule. While extended chains that resemble the hydrogen-bonded zigzag structures reported for solid methanol are an efficient way to pack methanol at higher coverages, lower surface coverages yield isolated hexamer units. These hexamers form the same number of hydrogen bonds as the chains but appear to repel one another on the surface. Annealing treatments lead to the desorption of methanol with almost no decomposition. This data serves as a useful guide to both the preferred adsorption geometries and energies of a variety of methanol structures on Cu(111) surfaces as a function of surface coverage.     

Heptanuclear heterometallic [Cu6Ln] clusters: trapping lanthanides into copper cages with artificial amino acids

Employment of the artificial amino acid 2-amino-isobutyric acid, aibH, in Cu(II) and Cu(II)/Ln(III) chemistry led to the isolation and characterization of 12 new heterometallic heptanuclear [Cu(6)Ln(aib)(6)(OH)(3)(OAc)(3)(NO(3))(3)] complexes consisting of trivalent lanthanide centers within a hexanuclear copper trigonal prism (aibH = 2-amino-butyric acid; Ln = Ce (1), Pr (2), Nd (3), Sm (4), Eu (5), Gd (6), Tb (7), Dy (8), Ho (9), Er (10), Tm (11), and Yb (12)). Direct curent magnetic susceptibility studies have been carried out in the 5-300 K range for all complexes, revealing the different nature of the magnetic interactions between the 3d-4f metallic pairs: dominant antiferromagnetic interactions for the majority of the pairs and dominant ferromagnetic interactions for when the lanthanide center is Gd(III) and Dy(III). Furthermore, alternating current magnetic susceptibility studies reveal the possibility of single-molecule magnetism behavior for complexes 7 and 8. Finally, complexes 2, 5-8, 10, and 12 were analyzed using positive ion electrospray mass spectrometry (ES-MS), establishing the structural integrity of the heterometallic heptanuclear cage structure in acetonitrile.     

镧碲酸盐玻璃的振动模式和结构的拉曼散射

利用拉曼光谱研究xLa₂O₃-(1-x)的TeO₂(x=0、0.05、0.10、0.15、0.20和0.25)镧碲酸盐玻璃,并对镧碲酸盐玻璃形成过程中氧化镧变化引起的结构变化进行了分析. 强度测量表明,在高频的伸缩振动区域,组合物被诱导发生结构变化. 通过混合TeO₄三角双锥和TeO₃三角金字塔单元形成网络结构的镧碲酸盐玻璃. 改变氧化镧的含量导致TeO₄单元向含有不同数目的非桥氧原子的TeO₃单元转换.通过不同的氧桥三角双锥和三角金字塔碲酸盐结构单元的振动拉曼谱带轮廓分析计算出发生结构变化的组合物的相对量. 另外,通过拉曼强度和与碲酸盐网络结构有关的结构估算出末端氧原子的比例. 对改性剂含量高达25％的镧碲酸盐玻璃的模拟结果表明,短程有序的单元足以构建整个玻璃.     

A global optimization algorithm for generalized semi-infinite,continuous minimax with coupled constraints and bi-level problems

We propose an algorithm for the global optimization of three problem classes: generalized semi-infinite, continuous coupled minimax and bi-level problems. We make no convexity assumptions. For each problem class, we construct an oracle that decides whether a given objective value is achievable or not. If a given value is achievable, the oracle returns a point with a value better than or equal to the target. A binary search is then performed until the global optimum is obtained with the desired accuracy. This is achieved by solving a series of appropriate finite minimax and min-max-min problems to global optimality. We use Laplace’s smoothing technique and a simulated annealing approach for the solution of these problems. We present computational examples for all three problem classes.