Recovery of pyridine from aqueous solution by membrane pervaporation

Three different membranes, based on poly(dimethylsiloxane) (PDMS), cation-exchange material and poly(vinyl alcohol) (PVA) respectively, were tudied for the separation of pyridine-water mixtures by pervaporation. The PDMS membrane was preferentially permeable to pyridine and the other two were selective towards water. Three membranes showed different permeation performance, allowing the application of the technique to the separation of feeds of different composition. The temperature profile of the permeability suggests that it is possible to carry out the operation at an elevated temperature in order to achieve high productivity. A combination of the three types of membranes was designed for the production of anhydrous pyridine from dilute pyridine aqueous solution by pervaporation.     

New organic nitrates. II. Synthesis of 2H-pyrido[2,3-e]-1,3-oxazine-2,4(3H)-diones, 2H-pyrido[4,3-e]-1,3-oxazine-2,4(3H)-diones, 2H-pyrido[4,3-e]-1,3-oxazin-4(3H)-ones, 2H-thieno[2,3-e]-1,3-oxazin-4(3H)-ones and 2H-thieno[3,4-e]-1,3-oxazin-2,4(3H)-diones

The preparation and the physico-chemical characterization of 2H-pyrido[2,3-e]-1,3-oxazine-2,4(3H)-diones, 2H-pyrido[4,3-e]-1,3-oxazine-2,4(3H)-diones, 2H-pyrido[4,3-e]-1,3-oxazin-4(3H)-ones, 2H-thieno[2,3-e]-1,3-oxazin-4(3H)-ones and 2H-thieno[3,4-e]-1,3-oxazine-2,4(3H)-diones are reported.     

Radical-based grafting of GMA on sutures of different nature

Irradiation of a number of different sutures largely employed in the clinical practice with either high energy electrons or with γ-rays followed by quenching with glycidyl methacrylate (GMA) conveniently led to derivatization through a radical-based process. The radicals involved were detected by means of ESR spectroscopy and were characterized on the basis of their ESR spectral parameters which were also found to be consistent with the hfs constants predicted by DFT calculations. Evidence of the GMA derivatization of the sutures was obtained via(13)C CP-MAS NMR spectroscopy, while its extent was evaluated gravimetrically.     

7‐Chloro‐3,6‐di­methyl‐1H‐indene‐2‐carb­aldehyde

In the crystal structure of C₁₂H₁₁ClO, the (planar) mol­ecules give rise to a parallel packing. A model crystal obtained by semi‐empirical and packing‐energy calculations is consistent with the observed structure.     

Structural determination of ruthenium-porphyrin complexes relevant to catalytic epoxidation of olefins

A reproducible synthesis of a competent epoxidation catalyst, [Ru(VI)(TPP)(O)2)] (TPP = tetraphenylporphyrin dianion), starting from [Ru(II)(TPP)(CO)L] (L = none or CH3OH), is described. The molecular structure of the complex was determined by using ab initio X-ray powder diffraction (XRPD) methods, and its solution behavior was in detail investigated by NMR techniques such as PGSE (pulsed field gradient spin-echo) measurements. [Ru(IV)(TPP)(OH)]2O, a reported byproduct in the synthesis of [Ru(VI)(TPP)(O)2], was synthesized in a pure form by oxidation of [Ru(II)(TPP)(CO)L] or by a coproportionation reaction of [Ru(VI)(TPP)(O)2] and [Ru(II)(TPP)(CO)L], and its molecular structure was then determined by XRPD analysis. [Ru(VI)(TPP)(O)2] can be reduced by dimethyl sulfoxide or by carbon monoxide to yield [Ru(II)(TPP)(S-DMSO)2] or [Ru(II)(TPP)(CO)(H2O)], respectively. These two species were characterized by conventional single-crystal X-ray diffraction analysis.     

Synthesis of monoprotected 1,4-diketones by photoinduced alkylation of enones with 2-substituted-1,3-dioxolanes

Photosensitized hydrogen abstraction from 2-alkyl-1,3-dioxolanes by triplet benzophenone gives the corresponding 1,3-dioxolan-2-yl radicals and these are trapped by ,β-unsatured ketones yielding monoprotected 1,4-diketones. With open chain ketones (3-buten-2-one and 4-penten-3-one) the yields are low and competitive pathways in part consume the radicals. With cyclic enones however, yields are good as tested with cyclopentenone, cyclohexenone and 4-hydroxy-cyclopentenone. More generally, this is a viable alternative for the synthesis of 1,4-diketones via radicals while the thermal initiation gives only low yield. The reaction cannot be extended to strongly stabilized radicals, such as the 2-phenyl-1,3-dioxolanyl radical.     

Palladium‐Catalyzed Cross‐Coupling of Styrenes with Aryl Methyl Ketones in Ionic Liquids: Direct Access to Cyclopropanes

The combined use of Pd(OAc)₂, Cu(OAc)₂, and dioxygen in molten tetrabutylammonium acetate (TBAA) promotes an unusual cyclopropanation reaction between aryl methyl ketones and styrenes. The process is a dehydrogenative cyclizing coupling that involves a twofold C? H activation at the α‐position of the ketone. The substrate scope highlights the flexibility of the catalyst; a reaction mechanism is also proposed.     

Methylene‐Bridged Metallocenes with 2,2′‐Methylenebis[1H‐inden‐1‐yl] Ligands: Synthesis,Characterization, and Polymerization Catalysis of a Synthetically Simple Class of C2‐ and C2v‐Symmetric ansa‐Metallocenes

The acid‐catalyzed reaction between formaldehyde and 1H‐indene, 3‐alkyl‐ and 3‐aryl‐1H‐indenes, and six‐membered‐ring substituted 1H‐indenes, with the 1H‐indene/CH₂O ratio of 2 : 1, at temperatures above 60° in hydrocarbon solvents, yields 2,2′‐methylenebis[1H‐indenes] 1 – 8 in 50–100% yield. These 2,2′‐methylenebis[1H‐indenes] are easily deprotonated by 2 equiv. of BuLi or MeLi to yield the corresponding dilithium salts, which are efficiently converted into ansa‐metallocenes of Zr and Hf. The unsubstituted dichloro{(1,1′,2,2′,3,3′,3a,3′a,7a,7′a‐η)‐2,2′‐methylenebis[1H‐inden‐1‐yl]}zirconium ([ZrCl₂( 1′ )]) is the least soluble in organic solvents. Substitution of the 1H‐indenyl moieties by hydrocarbyl substituents increases the hydrocarbon solubility of the complexes, and the presence of a substituent larger than a Me group at the 1,1′ positions of the ligand imparts a high diastereoselectivity to the metallation step, since only the racemic isomers are obtained. Methylene‐bridged ‘ansa‐zirconocenes’ show a noticeable open arrangement of the bis[1H‐inden‐1‐yl] moiety, as measured by the angle between the planes defined by the two π‐ligands (the ‘bite angle’). In particular, of the ‘zirconocenes’ structurally characterized so far, the dichloro{(1,1′,2,2′,3,3′,3a,3′a,7a,7′a‐η)‐2,2′‐methylenebis[4,7‐dimethyl‐1H‐inden‐1‐yl]}zirconium ([ZrCl₂( 5′ )] is the most open. The mixture [ZrCl₂( 1′ )]/methylalumoxane (MAO) is inactive in the polymerization of both ethylene and propylene, while the metallocenes with substituted indenyl ligands polymerize propylene to atactic polypropylene of a molecular mass that depends on the size of the alkyl or aryl groups at the 1,1′ positions of the ligand. Ethene is polymerized by rac‐dichloro{(1,1′,2,2′,3,3′,3a,3′a,7a,7′a‐η)‐2,2′‐methylenebis[1‐methyl‐1H‐inden‐1‐yl]}zirconium ([ZrCl₂( 2′ )])/MAO to polyethylene waxes (average degree of polymerization ca. 100), which are terminated almost exclusively by ethenyl end groups. Polyethylene with a high molecular mass could be obtained by increasing the size of the 1‐alkyl substituent.