Poly(vinylbenzyl Pyridinium Salts) as Novel Sorbents for Hazardous Metals Ions Removal

Novel efficient complexing resins—poly(vinylbenzyl pyridinium salts) fabricated through poly(vinylbenzyl halogene-co-divinylbenzene) quaternization of N-decyloxy-1-(pyridin-3-yl)ethaneimine and N-decyloxy-1-(pyridin-4-yl)ethaneimine—were tested as adsorbents of Pb(II), Cd(II), Cu(II), Zn(II), and Ni(II) from aqueous solutions. The structure of these materials was established by ¹³C CP-MAS NMR, X-ray photoelectron spectroscopy, elemental analysis, and Fourier transform infrared spectroscopy, as well as thermogravimetric and differential thermal analyses. The textural properties were determined using scanning electron microscopy and low-temperature N₂ sorption. Based on the conducted sorption studies, it was shown that the uptake behavior of the metal ions towards novel resins depended on the type of functionalities, contact time, pH, metal concentrations, and the resin dosage. The Langmuir model was investigated to be the best one for fitting isothermal adsorption equilibrium data, and the corresponding adsorption capacities were predicted to be 296.4, 201.8, 83.8, 38.1, and 39.3 mg/g for Pb(II), Zn(II), Cd(II), Cu(II), and Ni(II), respectively. These results confirmed that owing to the presence of the functional pyridinium groups, the resins demonstrated proficient metal ion removal capacities. Furthermore, VBBr-D4EI could be successfully used for the selective uptake of Pb(II) from wastewater. It was also shown that the novel resins can be regenerated without significant loss of their sorption capacity.     

Pharmacognostic Evaluation and HPLC–PDA and HS–SPME/GC–MS Metabolomic Profiling of Eleutherococcus senticosus Fruits

Eleutherococcus senticosus (Rupr. et Maxim.) Maxim. is a medicinal plant used in Traditional Chinese Medicine (TCM) for thousands of years. However, due to the overexploitation, this species is considered to be endangered and is included in the Red List, e.g., in the Republic of Korea. Therefore, a new source of this important plant in Europe is needed. The aim of this study was to develop pharmacognostic and phytochemical parameters of the fruits. The content of polyphenols (eleutherosides B, E, E1) and phenolic acids in the different parts of the fruits, as well as tocopherols, fatty acids in the oil, and volatile constituents were studied by the means of chromatographic techniques [HPLC with Photodiode-Array Detection (PDA), headspace solid-phase microextraction coupled to gas chromatography-mass spectrometry (HS–SPME/GC–MS)]. To the best of our knowledge, no information is available on the content of eleutherosides and phenolic acids in the pericarp and seeds. The highest sum of eleutheroside B and E was detected in the whole fruits (1.4 mg/g), next in the pericarp (1.23 mg/g) and the seeds (0.85 mg/g). Amongst chlorogenic acid derivatives (3-CQA, 4-CQA, 5-CQA), 3-CQA was predominant in the whole fruits (1.08 mg/g), next in the pericarp (0.66 mg/g), and the seeds (0.076 mg/g). The oil was rich in linoleic acid (C18:3 (n-3), 18.24%), ursolic acid (35.72 mg/g), and α-tocopherol (8.36 mg/g). The presence of druses and yellow oil droplets in the inner zone of the mesocarp and chromoplasts in the outer zone can be used as anatomical markers. These studies provide a phytochemical proof for accumulation of polyphenols mainly in the pericarp, and these structures may be taken into consideration as their source subjected to extraction to obtain polyphenol-rich extracts.     

Porous Molecular Capsules as Non-Polymeric Transducers of Mechanical Forces to Mechanophores

Mechanical grinding/milling can be regarded as historically the first technology for changing the properties of matter. Mechanically activated molecular units (mechanophores) can be present in various structures: polymers, macromolecules, or small molecules. However, only polymers have been reported to effectively transduce energy to mechanophores, which induces breakage of covalent bonds. In this paper, a second possibility is presented—molecular capsules as stress-sensitive units. Mechanochemical encapsulation of fullerenes in cystine-based covalent capsules indicates that complexation takes place in the solid state, despite the fact that the capsules do not possess large enough entrance portals. By using a set of solvent-free MALDI (sf-MALDI) and solid-state NMR (ss-NMR) experiments, it has been proven that encapsulation proceeds during milling and in this process hydrazones and disulfides get activated for breakage, exchange, and re-forming. The capsules are porous and therefore prone to collapse under solvent-free conditions and their conformational rigidity promotes the collapse by the breaking of covalent bonds.     

Vapor phase modification of sol-gel derived titania (TiO2) surfaces

Chemical vapor deposition (CVD) method was used in titania surface modification. Titania layers were obtained in sol-gel process and prepared as thin films on silicon wafers in dip-coating method. In order to define the influence of modification on titania surface properties (e.g., friction), various types of fluoroalkylsilanes were used. The effectiveness of the modification was monitored by FT-IR spectroscopy. The topography and frictional measurements were investigated with the use of atomic force microscopy (AFM).     

Application of the chromatographic binary solutions model to partition TLC

Summary This paper investigates the validity of the chromatographic binary solutions model utilizing experimental results of partition TLC.     

Some chain geometries determined by transformation groups

In the paper we propose a modification of the classical construction of the (Minkowskian) incidence structures based on permutation groups. Dropping out explicit assumptions concerning rigidity and transitivity (and assuming an arbitrary finite ”dimension”) we obtain a wider class of structures. Their geometrical properties are studied; in particular, we establish their automorphism groups and discuss some problems related to axiomatic characterization.     

A new class of libraries

In this paper we give the stationary measure and a sufficient condition of positive recurrence for a new class of linear libraries. These libraries are built by juxtaposing McCabe's libraries and Tsetlins libraries in an appropriate way: Their policy is not classical, by the fact that instead of a circular permutation, ₁ can be the product of several disjoint circular permutations.     

Potentiometric and coulometric titration of 2-thiobarbituric acid

A new method for the determination of 2-thiobarbituric acid, using its reaction with iodine in an alkaline medium is presented. In the volumetric titration with potentiometric end-point detection, the determinability range is 10-400 micromol (1.4-58 mg). In coulometric titration using the biamperometric end-point detection, 0.1-20 micromol (1.4 x 10(-2)-2.9 mg) of 2-thiobarbituric acid was successfully determined.     

Quantitative spectrophotometric and EPR-determination of 1,1-diphenyl-2-picryl-hydrazyl (DPPH)

A first simultaneous EPR- and VIS-spectrophotometric study is reported on the interaction of the stable free radical 1,1-diphenyl-2-picryl-hydrazyl (DPPH) dissolved in ethanol with thioglycolic acid (HSCH₂CO₂H, TGA). The results of the kinetic studies at room temperature permit to assume 1:1 stoichiometry of the reaction between DPPH and TGA giving 1,1-diphenyl-2-picryl-hydrazine (DPPH₂) and thioglycolic disulphide. The linear plots of EPR- and UV/Vis responses vs. the quantity of added TGA are used to find the DPPH molar absorptivity at 520 nm to be 12350 ± 3% l · mol^–1· cm^–1 which may be used as a criterion for the purity of the material itself. It was also found that the paramagnetic and optical properties of a 30 year old sample give results suggesting that in the solid state DPPH is a fairly stable material. Received: 12 October 1996 / Revised: 6 December 1996 / Accepted: 12 December 1996     

Application of organolithium and related reagents in synthesis,Part X. Metallation-electrophilic substitution sequence of secondary chlorobenzamides

Summary The lithiation (Bu ⁿLi/THF) of 2-chloro- (1), 3-chloro- (2) and 4-chlorobenzanilides (3) and the subsequent reactions of the corresponding bis-lithiated anilides4–6 with electrophiles (MeI, CH₂=CH-CH₂Br,Me ₃SiCl,MeCHO,o-MeOC₆H₄CHO,p-MeOC₆H₄CHO,Me ₂NCHO andp-MeOC₆H₄CONMe ₂) towards the synthesis of theortho substituted chlorobenzoesic acids derivatives12–14 have been described. The effect of the chlorine substituent upon the generation and stability of the bis-lithiated chloro-anilides4–6 has been studied. It has been found that the bis-lithiated chloro-anilide5 derived fromm-chloro-benzanilide (2) at a temperature above –30°C converts into the corresponding benzyne9. The anilide moiety (masking group) of the formedortho-substituted chlorobenzanilides appeared to be effectively removable on acid-driven hydrolysis.

---

Anwendungen von Organolithium und verwandten Reagenzien in organischen Synthesen, 10. Mitt. Metallierung und nachfolgende elektrophile Substitution sekundärer Chlorbenzamide

Zusammenfassung Die Lithiierung (Bu ⁿLi/THF) der 2-Chlor-(1), 3-Chlor- (2) and 4-Chlorbenzanilide (3) und nachfolgende Reaktion der entsprechenden doppellithiierten Anilide4–6 mit elektrophilen Reagenzien (MeI, CH₂=CH-CH₂Br,Me ₃SiCl,MeCHO,o-MeOC₆H₄CHO,p-MeOC₆H₄CHO,Me ₂NCHO undp-MeOC₆H₄CONMe ₂) zur Synthese vonortho-substituierten Benzoesäurederivaten12–14 wird beschrieben. Der Einfluß des Chlorsubstituierten auf die Bildung und Stabilität der doppellithiierten Chloranilide4–6 wurde untersucht. Es wurde festgestellt, daß das doppellithiierte, vomm-Chlorbenzanilid erhaltene Chloranilid5 bei Temperaturen über –30°C das entsprechende Arin9 bildet. Der Anilidrest (eine maskierende Gruppe) der gebildetenortho-substituierten Chloranilide kann durch saure Hydrolyse abgespalten werden.