Complete Oxidation of Methane over Palladium Supported on Alumina Modified with Calcium,Lanthanum,and Cerium Ions

The activity and thermal stability of Pd/Al_2O_3 and Pd/(Al_2O_3 MO_x)(M=Ca,La,Ce) palladium catalysts in the reaction of complete oxidation of methane are presented in this study.The catalyst supports were prepared by sol-gel method and they were dried either conventionally or with supercritical carbon dioxide.Then they were impregnated with palladium nitrate solution.The catalysts with unmodified alumina had a high surface area.The activity and thermal stability of the alumina- supported catalyst was also very high.The introduction of calcium,lanthanum,or cerium oxide into alumina support caused a decrease of the surface area in the way dependent on the support precursor drying method.These modifiers decreased the activity of palladium catalysts,and they required higher temperatures for the complete oxidation of methane than unmodified Pd/Al_2O_3.The improvement of the palladium activity by lanthanum and cerium support modifier was observed only at low temperatures of the reaction.     

Existence and uniqueness for nonlinear boundary value problems in kinetic theory

A boundary value problem for the stationary nonlinear Boltzmann equation in a slab has been examined in a weightedL space. It has been proved that the problem possesses a unique solution for boundary data small enough. The proof is based on the implicit function theorem. It has also been shown that for the linearized problem the Fredholm alternative applies.     

Ab initio study of the NMR shielding constants and spin-spin coupling constants in cyclopropene

Summary Ab initio calculations of parameters which characterize the NMR spectrum are presented for the cyclopropene molecule. The London orbitals CHF (or GIAO-CHF, Gauge-Independent Atomic Orbital Coupled Hartree-Fock) results for the shielding constants are in good agreement with the experimental data, accurately determined, and with otherab initio values. The calculations of the NMR spin-spin coupling constants have been performed using the Multiconfiguration Time-Dependent Hartree-Fock (MC TDHF) approach. Different basis sets and MC SCF wavefunctions were used to estimate the accuracy of the results. Good agreement is obtained with the coupling constants estimated using the available experimental data.Dedicated to Professor Werner Kutzelnigg on the occasion of his 60th birthday     

A 13-membered crown ether with an azoxy subunit in the macrocycle: Synthesis and X-ray structure

The presented azoxy compound is an example of a new crown ether analogue. It has been synthesized by the reduction of an open chain dinitro compound with stannite under strongly alkaline conditions. A method for the separation of the azo and azoxy compounds formed simultaneously has been proposed. The structures of two crystallographically independent molecules of compound2 have been determined. In spite of the small size of the macroring in compound2, the phenyl residues around the azoxy group have atrans orientation. Supplementary Data relating to this article have been deposited with the British Library as Supplementary Publication No. 82157 (11 pages).     

Chiral molecular glass: synthesis and characterization of enantiomerically pure thiophene-based [7]helicene

Synthesis of thiophene-based [7]helicenes, which are functionalized for both design of organic chiral glasses with strong chiroptical properties and for further homologation to higher [n]helicenes, is reported. The key synthetic transformations are kinetic resolution of the intermediate diketone and the annelation step forming the center benzene ring by means of an intramolecular McMurry reaction. Based upon X-ray crystallographic determinations of the absolute configurations for (+)-enantiomers of the diketone and the [7]helicene, stereochemical correlation between the (R) axial chirality of the diketone and the (M) helical chirality of the [7]helicene is established. One such enantiopure trimethylsilyl-substituted [7]helicene possesses enchanced chiroptical properties and forms a chiral molecular glass.     

Determination of organotin compounds in biological samples using accelerated solvent extraction,sodium tetraethylborate ethylation,and multicapillary gas chromatography–flame photometric detection

A method has been developed for species-selective analysis of organotin compounds in solid, biological samples. The procedure is based on accelerated solvent extraction (ASE) of analytes and includes extraction of the tin species with a methanol–water (90% methanol) solution of acetic acid/sodium acetate containing tropolone (0.03% w/v), their ethylation with NaBEt₄, and separation and detection by GC–FPD. The analytical procedure was optimized with an unspiked sample of harbor porpoise (Phocoena phocoena) liver. Effects of ASE operational variables (extraction temperature and pressure, solvent composition, number of static extraction steps) are discussed. Method detection limits (MDL) were in the range 6–10 ng(Sn) g^–1 dry weight and 7–17 ng(Sn) g^–1 dry weight for butyl- and phenyltin compounds, respectively. Recoveries were comparable with or better than those obtained by use of other procedures reported in the literature. The analytical procedure was validated by analysis of NIES No. 11 (fish tissue) certified reference material.     

Prediction of adsorption of organic component and water vapour mixture onto activated carbon

A simple isotherm equation is derived for the adsorption of an organic component onto activated carbon in presence of water vapour. The theoretical results are compared with experimental data for toluene-water vapour-activated carbon, which were published byRipperger andGermerdonk [10].

---

Vorhersage der Adsorption einer organischen Komponente und Wasserdampf an Aktivkohle

Zusammenfassung Es wird eine einfache Adsorptionsisotherme abgeleitet, welche die gleichzeitige Adsorption eines organischen Stoffes und Wasser an Aktivkohle beschreibt. Die theoretischen Ergebnisse werden mit experimentellen Resultaten vonRipperger undGermerdonk [10] für Toluol-Wasser-Aktivkohle verglichen.

---

Symbols a _i adsorbate concentration in adsorbent, kg/kg of carbon - a _0i monolayer capacity, kg/kg of carbon - b _i kinetic parameter of theLangmuir equation - E _j adsorption energy in thej-th layer - i i-th component (1 — water vapour, 2 — organic compound) - j j-th layer - m number of layers - n number of adsorbed components - p partial pressure, Pa - p* saturation partial pressure, Pa - p _C water vapour partial pressure at begining of capillary condensation, Pa - surface coverage     

De novo structural prediction of transition metal complexes: application to technetium

De novo structural prediction of transition metal complexes is investigated. Technetium complexes are chosen given their importance in medical imaging and nuclear waste remediation and for the chemical diversity they display. A new conformational searching algorithm (LIGB) for transition metals is described that allows one to search for different conformational and geometric isomers within a single simulation. In the preponderance of cases, both conformational searching techniques (LIGB and high-temperature molecular dynamics/simulated annealing) provide comparable results, while LIGB is superior for macrocyclic complexes. A genetic algorithm-optimized PM3(tm) parametrization for Tc is compared with the standard implementation and found to yield a significant improvement in predictive ability for the most prevalent Tc structural motifs. The utility of a coupled molecular mechanics-semiempirical quantum mechanics protocol is demonstrated for very rapid, efficient, and effective de novo prediction of transition metal complex geometries.     

Effect of silica-type sol-gel carrier’s structure and morphology on a supported Ziegler-Natta catalyst for ethylene polymerization

Silica xerogels with different structures and morphology, synthesized using a sol-gel procedure, were used as a carrier of vanadium catalysts (VOCl₃/AlEt₂Cl) for ethylene polymerization. Two techniques of catalyst synthesis were applied: slurry impregnation and gas-phase adsorption and the relevant polymerization methods were then employed. The effect of the carrier structure and morphology on the vanadium loading in the catalysts, the catalyst’s activity and kinetic stability were investigated.     

Cumulative atomic multipole representation of the molecular charge distribution and its basis set dependence

A simple procedure to decompose the theoretical molecular charge distribution into cumulative atomic multipoles supplementing any population analysis scheme has been described and tested for a number of molecules in extended basis sets. This approach may be applied to describe local charge distributions in neutral as well as charged systems and also leads to a simplified point-charge model conserving the local anisotropy of the atomic charge distribution in molecules. Such an approach may be useful in estimating intermolecular interactions, representing the molecular environment in solvent effect or enzyme catalytic activity studies, evaluation of molecular electrostatic potentials or tracing the quality of basis set functions.