The first N-alkyl-N′-polyfluorohetaryl sulfur diimide

The first AlkNSNHet_F sulfur diimide 6 (Alk=adamant-1-yl, Het_F=2,3,5,6-tetrafluoropyrid-4-yl) was prepared by trapping of the corresponding alkylthiazylamide [AlkNSN]⁻3 with pentafluoropyridine, followed by X-ray structural characterization. For 6, the Z,E configuration was found. From the reaction of 3 with octafluoronaphthalene, hexafluorinated naphthothiadiazole 7 was isolated along with the parent AlkNH₂.     

Delocalizations in sigma-radical cations: the intriguing structures of ionized [n]rotanes

Highly symmetric aliphatic hydrocarbons such as D(4h)-[4]rotane do not necessarily have degenerate HOMOs. According to our predictions based on high-level computations, its radical cation should display a highly delocalized D(4h)-symmetric structure, in contrast to its Jahn-Teller distorted cousin, the radical cation of [3]rotane, which exists in two distonic localized forms with C(2v) and C(s) symmetry.     

Magnetic nanocomposites based on cyclodextrin-containing molecular tubes and iron nanoparticles

Stabilization of metallic nanoparticles may be achieved by the formation of their adducts with polymers and/or nanotubes of various chemical composition. Here, water-soluble nanotubes based on β-cyclodextrin (β-tubes) were used for entrapping of Fe nanoparticles obtained by the reduction of iron-containing precursors ([Fe₃(CO)₁₁H][Et₄N] cluster and FeSO₄). Using methods of light-scattering, viscometry, and isothermal diffusion measurements, it was shown that the adducts are associated in aqueous solutions. The presence of iron nanoparticles and the shape and size of adducts were verified by transmission electron microscopy. The adducts are long (up to 600 nm and longer), translucent associates consisting of denser walls and transparent cores. The width of nanotubes is ∼150 nm and the thickness of the wall 3–25 nm. Their magnetic properties were demonstrated by electron paramagnetic resonance method. The mechanism of self-assembly of the adducts is discussed.     

1,2,5]Thiadiazolo[3,4-c][1,2,5]thiadiazolidyl: a long-lived radical anion and its stable salts

[1,2,5]Thiadiazolo[3,4-c][1,2,5]thiadiazole (1) is synthesized in 62% yield by fluoride ion-induced condensation of 3,4-difluoro-1,2,5-thiadiazole with (Me(3)SiN=)(2)S. The reversible electrochemical reduction of 1 leads to the long-lived [1,2,5]thiadiazolo[3,4-c][1,2,5]thiadiazolidyl radical anion (2) and further to the dianion (3). The radical anion 2 is also obtained by the chemical reduction of the precursor 1 with t-BuOK in MeCN. The radical anion 2 is characterized by ESR spectroscopy in solution and in the crystalline state. The stable salts [K(18-crown-6)][2] and [K(18-crown-6)][2].MeCN (8 and 9, respectively) are isolated from the spontaneous decomposition of the [K(18-crown-6)][PhXNSN] (6, X = S; 7, X = Se) salts in MeCN solution followed by XRD characterization. The radical anion 2 acts as a bridging ligand in 8 and as chelating ligand in 9. The structural changes observed by XRD in going from 1 to 2 are explained by means of DFT/(U)B3LYP/6-311+G calculations.     

Solvation of Tetraethyl- and Tetrabutylammonium Bromides in Aqueous Acetone and Aqueous Hexamethyl Phosphoric Triamide Mixtures in the Water-Rich Region

The enthalpies of solutions of tetraethylammonium and tetrabutylammonium bromides in the water-rich region of the water–acetone and water–hexamethyl phosphoric triamide mixed solvents have been measured at 25°C using a precise calorimetry system. The enthalpies of electrolyte solutions at infinite dilution were calculated using the Debye–Hückel theory. The enthalpies of solute transfer from water to the mixtures with acetone and hexamethyl phosphoric triamide were calculated. The enthalpy coefficients of solute–pair interactions with hexamethyl phosphoric triamide and acetone in aqueous solution were obtained using the McMillan–Mayer formalism. The values obtained were compared with those for other organic cosolvents. It was found that in aqueous solution the solutes show a strong tendency for hydrophobic interaction with cosolvent molecules, particularly in the water–hexamethyl phosphoric triamide system.     

Direct deperturbation analysis of the A 2Pi approximately B 2Sigma+ complex of 7,6LiAr isotopomers

Direct deperturbation analysis of the highly accurate experimental rovibronic term values of the A (2)Pi approximately B (2)Sigma(+) complex of LiAr [R. Bruhl and D. Zimmermann, J. Chem. Phys. 114, 3035 (2001)] has been performed in the framework of inverted close-coupling approach implicitly adjusted to the unified treatment of the overall A approximately B coupling effect without reducing the rovibrational dimensionality. The nonlinear fitting procedure was supported by the ab initio calculations on the spin-orbit and angular coupling matrix elements between the lowest X (2)Sigma(+), A (2)Pi, and B (2)Sigma(+) states. The analytical grid mapping based on the reduced variable representation of the radial coordinate r was used to improve the efficiency of the solution of the close-coupling radial equations near the dissociation limit. The mutual A approximately X perturbation effect on the A (2)Pi term values and spin-rotation splitting of the ground state were evaluated for both (7,6)LiAr isotopomers. The resulting empirical potential-energy curves for the adiabatic A (2)Pi and B (2)Sigma(+) states, along with the refined r-dependent nonadiabatic matrix elements, reproduce the total rovibronic structure of the (7)LiAr complex with the standard deviation of 0.003 cm(-1). The mass invariance of the deperturbed electronic parameters was confirmed by the calculation of the rovibronic term values of the (6)LiAr isotopomer which coincided with their experimental counterparts within 0.004 cm(-1).     

Role of the configuration interaction in the CNDO/S calculation of optical rotatory strengths

The rotatory strengths calculated directly by the CNDO/S method exhibit a pronounced dependence on the size of configuration interaction (CI). In order to elucidate the role of highly excited configurations in such calculations the perturbation theory is employed. It is shown that the restriction of the CI size to 20–40 may be quite inadequate in some cases. The calculations of rotatory strengths of several optically active molecules containing carbonyl and amide chromophores has shown that the best results can be obtained for half of full CI but sometimes it is possible to restrict the CI size to 100 configurations. The agreement with experiment for all molecules considered is satisfactory.     

Two‐dimensional square‐grid frameworks formed by self‐associating copper(II) complexes with 1‐(3‐pyridyl)‐ and 1‐(4‐pyridyl)‐substituted butane‐1,3‐diones

In bis­[1‐(3‐pyridyl)butane‐1,3‐dionato]copper(II) (the Cu atom occupies a centre of inversion), [Cu(C₉H₈NO₂)₂], (I), and bis­[1‐(4‐pyridyl)butane‐1,3‐dionato]copper(II) methanol solvate, [Cu(C₉H₈NO₂)₂]·CH₃OH, (II), the O,O′‐chelating diketonate ligands support square‐planar coordination of the metal ions [Cu—O = 1.948 (1)–1.965 (1) Å]. Weaker Cu⋯N inter­actions [2.405 (2)–2.499 (2) Å], at both axial sides, occur between symmetry‐related bis­(1‐pyridylbutane‐1,3‐dion­ato)copper(II) mol­ecules. This causes their self‐organization into two‐dimensional square‐grid frameworks, with uniform [6.48 Å for (I)] or alternating [4.72 and 6.66 Å for (II)] inter­layer separations. Guest methanol mol­ecules in (II) reside between the distal layers and form weak hydrogen bonds to coordinated O atoms [O⋯O = 3.018 (4) Å].     

Synthesis of porphyrins bearing hydrocarbon tethers and facile covalent attachment to si(100)

The use of redox-active molecules as the active storage elements in memory chips requires the ability to attach the molecules to an electroactive surface in a reliable and robust manner. To explore the use of porphyrins tethered to silicon via carbosilane linkages, 17 porphyrins have been synthesized. Fourteen porphyrins bear a tether at a single meso site, and three porphyrins bear functional groups at two beta sites for possible two-point attachment. Two high-temperature processing methods (400 degrees C under inert atmosphere) have been developed for rapid (minutes), facile covalent attachment to Si platforms. The high-temperature processing conditions afford attachment either by direct deposition of a dilute solution (1 microM-1 mM) of the porphyrin sample onto the Si substrate or sublimation of a neat sample onto the Si substrate. The availability of this diverse collection of porphyrins enables an in-depth examination of the effects of the tether (length, composition, terminal functional group, number of tethers) and steric bulk of nonlinking substituents on the information-storage properties of the porphyrin monolayers obtained upon attachment to silicon. Attachment proceeds readily with a wide variety of hydrocarbon tethers, including 2-(trimethylsilyl)ethynyl, vinyl, allyl, or 3-butenyl directly appended to the porphyrin and iodo, bromomethyl, 2-(trimethylsilyl)ethynyl, ethynyl, vinyl, or allyl appended to the 4-position of a meso-phenyl ring. No attachment occurs with substituents such as phenyl, p-tolyl, mesityl, or ethyl. Collectively, the studies show that the high-temperature attachment procedure (1) has broad scope encompassing diverse functional groups, (2) tolerates a variety of arene substituents, and (3) does not afford indiscriminate attachment. The high-temperature processing conditions are ideally suited for use in fabrication of hybrid molecular/semiconductor circuitry.     

Transformation of esters into allyl halides via substituted cyclopropanols. Application in the synthesis of (2S,3R,7R/S)-3,7-dimethyltridec-2-yl acetate and propionate, sex attractants of pine sawfly Diprion pini

A convenient new approach to the synthesis of the acetate and the propionate of (2S,3R,7R/S)-3,7-dimethyltridecan-2-ol, sex attractants of Diprion pini L., using the cyclopropanation of the ethoxycarbonyl group in O-THP protected ethyl (S)-lactate with ethylmagnesium bromide in the presence of titanium(IV) isopropoxide followed by C-2-C-3 cyclopropane ring opening as the key steps has been performed.