Optimization of matrix-assisted laser desorption/ionization time-of-flight collision-induced dissociation using poly(ethylene glycol)

Details of the optimization of the collision-induced dissociation (CID) process, using a collision cell on a matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) mass spectrometer, are described using poly(ethylene glycol) 1000 (PEG 1000) as a model analyte. The effects of collision gas identity (helium, air, and argon), as well as collision gas pressure, on the resulting MS/MS data were investigated. With PEG 1000, helium was found to give the best results with respect to signal-to-noise (S/N) ratio. The optimum pressure for each gas was found to be in the range where the precursor ion signal was attenuated to approximately 30-50% for helium and 40-60% for argon. The effect of cation choice (Li, Na, and K) on the CID of PEG was also studied. CID spectra were produced for each, but PEG cationized with lithium was found to produce the spectra with the highest S/N ratio. The MALDI-TOF CID spectra that were generated for PEG were compared with the high-energy and low-energy MS/MS spectra obtained from a sector mass spectrometer and from a triple quadrupole mass spectrometer, respectively. The results observed for PEG confirm that CID on a MALDI-TOF mass spectrometer is a high-energy MS/MS technique.     

Synthetic approaches to 5,7-disubstituted imidazo[5,1-f][1,2,4]triazin-4-amines

The preparation of 5,7-disubstituted imidazo[5,1-f][1,2,4]triazin-4-amines, exemplified by 5-[3-(benzyloxy)phenyl]-7-cyclobutylimidazo[5,1-f][1,2,4]triazin-4-amine, was developed through a linear and three convergent synthetic strategies, with the latter providing the greatest flexibility for diversification at the 5-position at the last step of the synthesis.     

Performance of columns packed with the new shell particles,Kinetex-C18

The performance of the new Kinetex-C₁₈ column was investigated. Packed with a new brand of porous shell particles, this column has an outstanding efficiency. Once corrected for the contribution of the instrument extra column volume, the minimum values of the reduced plate heights for a number of low molecular weight compounds (e.g., anthracene and naphtho[2,3-a]pyrene) were between 1.0 and 1.3, breaking the legendary record set 3 years ago by Halo-C₁₈ packed columns. The liquid-solid mass transfer of proteins (e.g., insulin and lyzozyme) is exceptionally fast on Kinetex-C₁₈ much faster than on the Halo-C₁₈ column. The different contributions of dispersion and mass transfer resistances to the column efficiency were determined and discussed. The possible reasons for this extremely high column efficiency are discussed.     

Quantitative assessment of moisture damage for cacao bean quality using two-dimensional gas chromatography combined with time-of-flight mass spectrometry and chemometrics

Quality control of cacao beans is a significant issue in the chocolate industry. In this report, we describe how moisture damage to cacao beans alters the volatile chemical signature of the beans in a way that can be tracked quantitatively over time. The chemical signature of the beans is monitored via sampling the headspace of the vapor above a given bean sample. Headspace vapor sampled with solid-phase micro-extraction (SPME) was detected and analyzed with comprehensive two-dimensional gas chromatography combined with time-of-flight mass spectrometry (GC × GC–TOFMS). Cacao beans from six geographical origins (Costa Rica, Ghana, Ivory Coast, Venezuela, Ecuador, and Panama) were analyzed. Twenty-nine analytes that change in concentration levels via the time-dependent moisture damage process were measured using chemometric software. Biomarker analytes that were independent of geographical origin were found. Furthermore, prediction algorithms were used to demonstrate that moisture damage could be verified before there were visible signs of mold by analyzing subsets of the 29 analytes. Thus, a quantitative approach to quality screening related to the identification of moisture damage in the absence of visible mold is presented.     

(2+1) laser-induced fluorescence of spin-polarized hydrogen atoms

We report the measurement of the spin polarization of hydrogen (SPH) atoms by (2+1) laser-induced fluorescence, produced via the photodissociation of thermal HBr molecules with circularly polarized 193 nm light. This scheme, which involves two-photon laser excitation at 205 nm and fluorescence at 656 nm, offers an experimentally simpler polarization-detection method than the previously reported vacuum ultraviolet detection scheme, allowing the detection of SPH atoms to be performed more straightforwardly, from the photodissociation of a wide range of molecules and from a variety of collision experiments.     

Di- and trisubstituted γ-lactams via Rh(II)-carbenoid reaction of N-Cα-branched, N-bis(trimethylsilyl)methyl α-diazoamides. Synthesis of (±)-α-allokainic acid

Acyclic N-C(α)-branched, N-bis(trimethylsilyl)methyl (N-BTMSM) diazoamides undergo regio-, chemo-, and diastereoselective Rh(II)-carbenoid C-H insertion to give 4,5-disubstituted and 3,4,5-trisubstituted γ-lactams. The conformational influence of the N-BTMSM group and the electronic effect of the O-pivaloyl moiety of the C(α)-oxymethylene unit are essential for the observed regioselectivity. The synthesis of α-allokainic acid demonstrates the utility of the method.     

Nondestructive three-dimensional analysis of layered polymer structures with chemical imaging

Three-dimensional (3D) chemical information was obtained by means of a combination of two-dimensional attenuated total reflection Fourier transform infrared (ATR-FT-IR) imaging with a focal plane array detector and variable angle depth profiling. Since the penetration depth of the evanescent wave in ATR spectroscopy is not limited by diffraction, it was possible to resolve thin sandwiched polymer layers nondestructively within a stack of polymer layers. Chemical images were obtained from layers of different thickness of the laminate by moving a custom-made aperture to specific positions on the condenser lens of the ATR accessory. Sequences of absorption images detect the successive appearance of thin, buried layers of polybutylmethacrylate (d(PBMA) = 400 nm) and polycarbonate (d(TMPC) = 300 nm) in different depths of the stack of polymer layers. The depth resolution of variable-angle ATR-FT-IR imaging is sufficiently high to detect surface roughness at the interface between different polymer layers. Two different stacks of polymers with reordered sandwich-layers were imaged simultaneously, demonstrating the potential of variable angle ATR-FT-IR for 3D-imaging of a sample with xyz-heterogeneity, which can be a powerful analytical technique for materials science and biomedical research.     

Synthesis,characterization, and star polymer assembly of boronic acid end‐functionalized polycaprolactone

Boronic acid end‐functionalized polycaprolactone (PCL) polymers were synthesized by ring‐opening polymerization using a pinacol boronate ester‐containing (Bpin) initiator. The polymerization provides access to boron‐terminated polymers (i.e. Bpin‐PCL‐OH) with narrow molecular weight distributions (PDI = 1.09). Postsynthetic manipulation of the polymer's terminal hydroxyl group by copper‐catalyzed azide‐alkyne cycloaddition chemistry provides a series of bis end‐functionalized polymers with significant structural diversity at the termini. Deprotection of the boronate ester end group was accomplished with an acidic solid phase DOWEX resin. The boronate ester deprotection methodology does not result in hydrolysis of the polymeric backbone. The boronic acid‐tipped polymers were converted into star polymer assemblies using thermal dehydration and ligand‐facilitated trimerization. Thermal dehydration of (HO)₂B‐PCL‐OAc to the corresponding boroxine‐based star polymer assembly was inefficient and lead to degradation products. Ligand‐facilitated trimerization using either pyridine or 7‐azaindole as the Lewis base was efficient and mild. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Doubly diastereoselective conjugate addition of enantiopure lithium amides to enantiopure N-enoyl oxazolidin-2-ones: a mechanistic probe

The doubly diastereoselective conjugate addition of the antipodes of lithium N-benzyl-N-(α-methylbenzyl)amide to a range of enantiopure N-enoyl oxazolidin-2-ones has been used as a mechanistic probe to determine that the reactive conformation is the anti-s-cis form. The β-amino carbonyl products resulting from these conjugate addition reactions are useful templates for further elaboration into an α,β,α-pseudotripeptide.     

Electronic structure of lanthanum transition-metal oxyarsenides LaMAsO (M = Fe,Co, Ni) and LaFe1−xM′xAsO (M′ = Co,Ni) by X-ray photoelectron and absorption spectroscopy

The electronic structures of the quaternary oxyarsenides LaMAsO (M = Fe, Co, Ni) were examined with X-ray photoelectron spectroscopy (XPS) and X-ray absorption near-edge spectroscopy (XANES). Interpretation of the metal 2p_3/2 and arsenic 3d_5/2 binding energies, as well as a satellite feature in the Co 2p XPS spectrum, suggests charges that are much less extreme than expected (i.e., not M²⁺ and As^3?) because of the strong covalent character within the M–As bonds. As M is varied, the differing degrees of charge transfer from M to As atoms within these bonds are manifested by shifts in the As 3d_5/2 binding energies and changes in the As K-edge intensities. This charge transfer is isolated within the [MAs] layer and does not influence the O 1s and La 3d XPS spectra. Fitting the experimental valence band spectra of these oxyarsenides LaMAsO yielded electron populations of states that support the formal charge assignment [La³⁺O^2?][M²⁺As^3?]. The mixed-metal series LaFe_1?xM′_xAsO (M′ = Co, Ni) was examined by XANES; analysis of the metal K- and L-edges, as well as of the Co 2p XPS satellite feature, revealed that no metal–metal charge transfer takes place.