Condition Monitoring of Ground Anchorages by Dynamic Impulses: GRANIT System

The GRANIT system operates by applying an impulse of known force by means of an impact device that is attached to the tendon of the anchorage. The vibration response signals resulting from this impulse are complex in nature and require analysis to be undertaken in order to extract information from the vibrational response signatures that is relevant to the condition of the anchorage. In the system, the complicated relationship that exists between characteristics of an anchorage and its response to an impulse is identified and learned by a novel artificial intelligence network based on artificial intelligence techniques.The results presented in this paper demonstrate the potential of the GRANIT system to diagnose the integrity of ground anchorages at a site near Stone, England, by using a trained neural network capable of diagnosing the post-tension level of the anchorage. This neural network was used for the diagnosis of load in a second ground anchorage adjacent to the original anchorage used for the training of the neural network. Further tests were taken with a different anchor head configuration of the anchorage and a different relationship between the signature response of the anchorage to an applied impulse and its post-tension level was found.Problems encountered during the diagnosis of this second set of test signatures by the trained neural network are investigated with the use of a lumped parameter dynamic model. This model is able to identify the parameters in the anchorage system that affect this change in response signature. The results from the investigation lead to a new form of classification for the installed anchorages, based on their anchor head configuration.Laboratory strand anchorage tests were undertaken in order to compare with and validate the results obtained from the field tests and the lumped parameter dynamic model.     

Development of adaptive modeling techniques for non-linear hysteretic systems

Adaptive estimation procedures have gained significant attention by the research community to perform real-time identification of non-linear hysteretic structural systems under arbitrary dynamic excitations. Such techniques promise to provide real-time, robust tracking of system response as well as the ability to track time variation within the system being modeled. An overview of some of the authors’ previous work in this area is presented, along with a discussion of some of the emerging issues being tackled with regard to this class of problems. The trade-offs between parametric-based modeling and non-parametric modeling of non-linear hysteretic dynamic system behavior are discussed. Particular attention is given to (1) the effects of over- and under-parameterization on parameter convergence and system output tracking performance, (2) identifiability in multi-degree-of-freedom structural systems, (3) trade-offs in setting user-defined parameters for adaptive laws, and (4) the effects of noise on measurement integration. Both simulation and experimental results indicating the performance of the parametric and non-parametric methods are presented and their implications are discussed in the context of adaptive structures and structural health monitoring.     

Enzymatic Method for the Synthesis of Long DNA Sequences with Multiple Repeat Units

A polymerase chain reaction (PCR) derived method for preparing long DNA, consisting of multiple repeat units of one to ten base pairs, is described. Two seeding oligodeoxynucleotides, so‐called oligoseeds, which encode the repeat unit and produce a duplex with 5′‐overhangs, are extended using a thermostable archaeal DNA polymerase. Multiple rounds of heat–cool extension cycles, akin to PCR, rapidly elongate the oligoseed. Twenty cycles produced long DNA with uniformly repeating sequences to over 20 kilobases (kb) in length. The polynucleotides prepared include [A]_n/[T]_n, [AG]_n/[TC]_n, [A₂G]_n/[T₂C]_n, [A₃G]_n/[T₃C]_n, [A₄G]_n/[T₄C]_n, [A₉G]_n/[T₉C]_n, [GATC]_n/[CTAG]_n, and [ACTGATCAGC]_n/[TGACTAGTCG]_n, indicating that the method is extremely flexible with regard to the repeat length and base sequence of the initial oligoseeds. DNA of this length (20 kb≈7 μm) with strictly defined base reiterations should find use in nanomaterial applications.     

Ultraviolet Absorption Induces Hydrogen‐Atom Transfer in G⋅C Watson–Crick DNA Base Pairs in Solution

Ultrafast deactivation pathways bestow photostability on nucleobases and hence preserve the structural integrity of DNA following absorption of ultraviolet (UV) radiation. One controversial recovery mechanism proposed to account for this photostability involves electron‐driven proton transfer (EDPT) in Watson–Crick base pairs. The first direct observation is reported of the EDPT process after UV excitation of individual guanine–cytosine (G?C) Watson–Crick base pairs by ultrafast time‐resolved UV/visible and mid‐infrared spectroscopy. The formation of an intermediate biradical species (G[?H]?C[+H]) with a lifetime of 2.9 ps was tracked. The majority of these biradicals return to the original G?C Watson–Crick pairs, but up to 10 % of the initially excited molecules instead form a stable photoproduct G*?C* that has undergone double hydrogen‐atom transfer. The observation of these sequential EDPT mechanisms across intermolecular hydrogen bonds confirms an important and long debated pathway for the deactivation of photoexcited base pairs, with possible implications for the UV photochemistry of DNA.     

Thermal Stability and Molecular Ordering of Organic Semiconductor Monolayers: Effect of an Anchor Group

The thermal stability and molecular order in monolayers of two organic semiconductors, PBI‐PA and PBI‐alkyl, based on perylene derivatives with an identical molecular structure except for an anchor group for attachment to the substrate in PBI‐PA, are reported. In situ X‐ray reflectivity measurements are used to follow the stability of these monolayers in terms of order and thickness as temperature is increased. Films have thicknesses corresponding approximately to the length of one molecule; molecules stand upright on the substrate with a defined structure. PBI‐PA monolayers have a high degree of order at room temperature and a stable film exists up to 250 °C, but decomposes rapidly above 300 °C. In contrast, stable physisorbed PBI‐alkyl monolayers only exist up to 100 °C. Above the bulk melting point at 200 °C no more order exists. The results encourage using anchor groups in monolayers for various applications as it allows enhanced stability at the interface with the substrate.     

Total Synthesis of (+)‐Rubriflordilactone A

Two enantioselective total syntheses of the nortriterpenoid natural product rubriflordilactone A are described, which use palladium‐ or cobalt‐catalyzed cyclizations to form the CDE rings, and converge on a late‐stage synthetic intermediate. These key processes are set up through the convergent coupling of a common diyne component with appropriate AB‐ring aldehydes, a strategy that sets the stage for the synthetic exploration of other members of this family of natural products.     

Microwire Chronoamperometric Determination of Concentration,Diffusivity, and Salinity for Simultaneous Oxygen and Proton Reduction

A microwire chronoamperometric method is reported employing a 25 µm diameter platinum microwire for multi‐parameter electroanalysis with digital simulation‐based evaluation (employing DigiElch 4.F). Concentration and diffusion coefficient data are obtained for the reduction of oxygen and for the reduction of protons individually and simultaneously in saline (0.1 M to 4.0 M NaCl) electrolyte media. The diffusion coefficient and concentration data for oxygen allows salinity levels to be estimated. The microwire chronoamperometry method offers versatility and precision due to (i) a slow approach to steady state (when compared to microdisc methods) and (ii) insignificant viscosity effects (when compared to hydrodynamic methods).     

Separation of cannabinoids on three different mixed‐mode columns containing carbon/nanodiamond/amine‐polymer superficially porous particles

Three mixed‐mode high‐performance liquid chromatography columns packed with superficially porous carbon/nanodiamond/amine‐polymer particles were used to separate mixtures of cannabinoids. Columns evaluated included: (i) reversed phase (C₁₈), weak anion exchange, 4.6 × 33 mm, 3.6 μm, and 4.6 × 100 mm, 3.6 μm, (ii) reversed phase, strong anion exchange (quaternary amine), 4.6×33 mm, 3.6 μm, and (iii) hydrophilic interaction liquid chromatography, 4.6 × 150 mm, 3.6 μm. Different selectivities were achieved under various mobile phase and stationary phase conditions. Efficiencies and peak capacities were as high as 54 000 N/m and 56, respectively. The reversed phase mixed‐mode column (C₁₈) retained tetrahydrocannabinolic acid strongly under acidic conditions and weakly under basic conditions. Tetrahydrocannabinolic acid was retained strongly on the reversed phase, strong anion exchange mixed‐mode column under basic polar organic mobile phase conditions. The hydrophilic interaction liquid chromatography column retained polar cannabinoids better than the (more) neutral ones under basic conditions. A longer reversed phase (C₁₈) mixed‐mode column (4.6 × 100 mm) showed better resolution for analytes (and a contaminant) than a shorter column. Fast separations were achieved in less than 5 min and sometimes 2 min. A real world sample (bubble hash extract) was also analyzed by gradient elution.     

The origin of the ligand-controlled regioselectivity in Rh-catalyzed [(2 + 2) + 2] carbocyclizations: steric vs. stereoelectronic effects

Density functional theory calculations demonstrate that the reversal of regiochemical outcome of the addition for substituted methyl propiolates in the rhodium-catalyzed [(2 + 2) + 2] carbocyclization with PPh₃ and (S)-xyl-binap as ligands is both electronically and sterically controlled. For example, the ester functionality polarizes the alkyne π* orbital to favor overlap of the methyl-substituted terminus of the alkyne with the p_π-orbital of the alkenyl fragment of the rhodacycle during alkyne insertion with PPh₃ as the ligand. In contrast, the sterically demanding xyl-binap ligand cannot accommodate the analogous alkyne orientation, thereby forcing insertion to occur at the sterically preferred ester terminus, overriding the electronically preferred orientation for alkyne insertion.