Millimeter-scale contact printing of aqueous solutions using a stamp made out of paper and tape

This communication describes a simple method for printing aqueous solutions with millimeter-scale patterns on a variety of substrates using an easily fabricated, paper-based microfluidic device (a paper-based "stamp") as a contact printing device. The device is made from inexpensive materials, and it is easily assembled by hand; this method is thus accessible to a wide range of laboratories and budgets. A single device was used to print over 2500 spots in less than three minutes at a density of 16 spots per square centimetre. This method provides a new tool to pattern biochemicals-reagents, antigens, proteins, and DNA-on planar substrates. The accuracy of the volume of fluid delivered in simple paper-to-paper printing is low, and although the pattern transfer is rapid, it is better suited for qualitative than accurate, quantitative work. By patterning the paper to which the transfer occurs using wax printing or an equivalent technique, accuracy increases substantially.     

The determinant of a class of skew-symmetric toeplitz matrices

The determinant of the n×n matrix associated with the finite-difference operator μδ^2r+1 is obtained explicitly for all n and all integral r?0. An interesting combinatorial identity results.     

On the First Critical Field in Ginzburg–Landau Theory for Thin Shells and Manifolds

In this article, we investigate the response of a thin superconducting shell to an arbitrary external magnetic field. We identify the intensity of the applied field that forces the emergence of vortices in minimizers, the so-called first critical field H _c1 in Ginzburg–Landau theory, for closed simply connected manifolds and arbitrary fields. In the case of a simply connected surface of revolution and vertical and constant field, we further determine the exact number of vortices in the sample as the intensity of the applied field is raised just above H _c1. Finally, we derive via Γ-convergence similar statements for three-dimensional domains of small thickness, where in this setting point vortices are replaced by vortex lines.     

Gold nanoparticles deposited capillaries for in-capillary microextraction capillary zone electrophoresis of monohydroxy-polycyclic aromatic hydrocarbons

This article presents the first application of gold nanoparticles deposited capillaries as pre-concentration devices for in-capillary microextraction CZE and their use for the analysis of monohydroxy-polycyclic aromatic hydrocarbons in synthetic urine samples. The successful separation of 1-hydroxypyrene, 9-hydroxyphenanthrene, 3-hydroxybenzo[a]pyrene (3-OHbap), 4-hydroxybenzo[a]pyrene and 5-hydroxybenzo[a]pyrene under a single set of electrophoretic conditions is demonstrated as well as the feasibility to obtain competitive ultraviolet absorption LOD with commercial instrumentation. Enrichment factors ranging from 87 (9-OHphe) to 100 (3-OHbap) made it possible to obtain LOD ranging from 9 ng/mL (9-OHphe and 3-OHbap) to 14 ng/mL (4-hydroxybenzo[a]pyrene).     

Determination of polycyclic aromatic hydrocarbons with molecular weight 302 in water samples by solid-phase nano-extraction and laser excited time-resolved Shpol'skii spectroscopy

Monitoring of high-molecular weight polycyclic aromatic hydrocarbons (HMW-PAH) via simple and cost effective methods still remains a challenge. In this article, we combine solid-phase nano-extraction (SPNE) and 4.2 K laser-excited time resolved Shpol'skii spectroscopy (LETRSS) into a valuable alternative for the water analysis of dibenzo[a,l]pyrene, dibenzo[a,h]pyrene, dibenzo[a,i]pyrene and naphtho[2,3-a]pyrene. In comparison to the original SPNE procedure, the present method improves PAH recoveries and reduces extraction time from 30 to 20 min per sample. Quantitative release of HMW-PAH into the Shpol'skii matrix (n-octane) is best accomplished with a mixture of 48 μL of methanol and 2 μL of 1-pentanethiol. Their migration into the 50 μL layer of n-octane provides highly resolved spectra with distinct fluorescence lifetimes for unambiguous isomer determination. Complete analysis takes less than 30 min per sample and consumes only 100 micro-liters of organic solvents. 500 μL of water are sufficient to obtain limits of detection ranging from 16 ng L(-1) (dibenzo[a,l]pyrene) to 55 ng L(-1) (dibenzo[a,i]pyrene), relative standard deviations better than 3% and analytical recoveries above 90%. Although a straightforward comparison to chromatographic methods is not possible because of the lack of analytical figures of merit on HMW-PAH, the excellent precision of measurements, limits of detection and overall recoveries makes SPNE-LETRSS an attractive approach to water analysis of HMW-PAH.     

6-Phosphoryl picolinic acids as europium and terbium sensitizers

Three 6-phosphoryl picolinic acid (6PPA) derivatives were synthesized and used as europium and terbium sensitizers. Two of the three ligands (6-diethoxyphosphoryl picolinic acid (Hdeppa) and 6-monoethoxyphosphoryl picolinic acid (H(2)meppa)) are water-soluble, once complexed to lanthanide ions, while the third (6-dihydroxyphosphoryl picolinic acid (H(3)dhppa)) forms a precipitate. The stability constants of the phosphoryl-based complexes were found to be higher than the carboxylate analogue (dipicolinic acid, H(2)dpa). The main species are the [LnL(3)] complexes under strict stoichiometric conditions, confirmed by (31)P NMR spectroscopy, mass spectrometry and lifetime analyses. The photophysical measurements reveal that the emission intensity of [Eu(deppa)(3)] is maximal at pH 4.8, whereas for [Eu(meppa)(3)](3-), the optimum pH is observed at 9.0. The lifetimes are all in the millisecond range and have confirmed the absence of water molecules in the first coordination sphere. The emissions of the terbium are always brighter than the corresponding europium within this phosphoryl series. The quantum yields of the phosphoryl containing complexes are lower than the carboxylate analogue ([Ln(dpa)(3)](3-)), except for [Tb(deppa)(3)], which exhibits an interesting quantum yield of 40% in aqueous solution.     

Utilization of Agro-Industrial Residues in the Rearing and Nutritional Enrichment of Zophobas atratus Larvae: New Food Raw Materials

Edible insects are a potential alternative food source of high feed conversion efficiency and protein content. Zophobas atratus is an edible insect that adapts to different diets, enabling sustainable rearing by adding value to by-products and agro-industrial residues. This study aimed to evaluate the performance and nutritional characterization of Zophobas atratus larvae fed with different proportions of grape residue. Physicochemical analysis of the diets and larvae (AOAC procedures), fatty acid profile (chromatographic techniques), metals and non-metals (inductively coupled plasma optical emission spectrometry), larval mass gain, feed conversion efficiency, and mortality rate were assessed. The replacement of 25% of the conventional diet with grape residue increased lipid, ash, and fiber contents and reduced protein, carbohydrates, and energy. It promoted greater mass gain, lower mortality rate, and reduced larval growth time by 51%. Among the replacements, 25% resulted in the second-highest content of calcium, sodium, magnesium, and zinc, and the lowest content of potassium and phosphorus in the larvae. The 100% replacement resulted in the highest amounts of C18:2n6 (27.8%), C18:3n3 (2.2%), and PUFA (30.0%). Replacing 25% of the conventional diet with grape residue is equivalent to the conventional diet in many aspects and improves several larvae performance indices and nutritional values.