Characterisation of poly(neutral red) modified carbon film electrodes; application as a redox mediator for biosensors

The polymer redox mediator, poly(neutral red) (PNR), has been synthesised and characterised electrochemically to investigate the best electropolymerisation and mediation conditions for application in enzyme biosensors and to clarify the mechanism of action. Neutral red was electropolymerised by potential cycling on carbon film electrode substrates by allowing the monomer to be oxidised during the full 20 cycles of polymerisation or reducing the positive limit of the potential window after the first 2 cycles to impede monomer oxidation with a view to obtaining longer polymer chains and a lesser degree of branching. Comparison was made with glassy carbon substrates. The PNR films on carbon film electrodes were characterised using cyclic voltammetry and electrochemical impedance spectroscopy, as well as in glucose biosensors prepared with PNR. Glucose oxidase enzyme was immobilised by encapsulation in silica sol-gel and compared with that obtained by cross-linking with glutaraldehyde. The biosensors were evaluated by chronoamperometry in 0.1 M phosphate buffer saline solution, pH 7.0, and showed evidence of electron transfer between the enzyme cofactor flavin adenine dinucleotide and PNR dissolved in the enzyme layer competing with PNR-mediated electrochemical degradation of H₂O₂ formed during the enzymatic process. This paper is dedicated to Professor Dr. Algirdas Vaskelis on the occasion of his 70th birthday.     

Multielemental analysis of food and agricultural matrixes by inductively coupled plasma-mass spectrometry

The suitability of quadrupole inductively coupled plasma-mass spectrometry (ICP-MS) for multielemental analysis of food following microwave closed vessel digestion of samples was evaluated in relation to analytical challenges presented by some major food and agricultural matrixes. Fifteen key analytes (Al, As, Cd, Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb, Se, Sn, V, Zn) were determined in 9 reference materials representative of 3 major groups of staple foods (cereals, seafood, and meat). For all measurements, the method of external calibration was used and Rh was selected as internal standard. Matrix-induced interferences were evaluated for each material, and suitable methods to overcome them were applied. Spectral interferences caused by C, Cl, and Ca content of digestates were quantitated and corrected by entering a simple system of mathematical correction equations into the instrument software before each analytical run. Full mastering of interferences together with adoption of a series of measures to control the reliability of analytical measurements produced accurate results for all the analytes. A standard analytical protocol is outlined for the benefit of both research and routine high-throughput laboratories that perform ICP-MS analyses of food.     

Anion effects on the recognition of ion pairs by calix[4]arene-based heteroditopic receptors

A novel heteroditopic receptor (5) based on a rigid calix[4]arene cavity bearing at the upper rim four arylsulfonamido binding sites has been synthesized. The binding abilities of this new host have been investigated in apolar solvents toward a series of tetramethylammonium salts (tosylate, chloride, acetate, trifluoroacetate, and picrate) and compared with those of monotopic and heteroditopic calix[4]arene-bis(crown-3)-based receptors 1 and 2 in order to evaluate the role of the anion on ion-pair recognition. While monotopic host 1 shows an efficiency order toward the different salts that increases when the anion is less interactive (Hofmeister trend), an opposite role of the counteranion on the recognition process was observed with host 5 (anti-Hofmeister trend). A more complex behavior is experienced by host 2, which shows a high and leveled efficiency for all the anions tested. The results obtained were explained on the basis of the different types of ion pairs present in the recognition process. Further information on the role of the anion were obtained by the "dual host" strategy utilizing the tri-n-butylthioureido derivative of tren 7, which forms a stable complex with chloride anion. The very high efficiency shown by these heteroditopic hosts opens new routes in supramolecular projects and is a very interesting tool in the molecular recognition of ion-pairs and its applications.     

Technological quality determination of pharmaceutical disintegrant by DSC cooling and DSC photovisual

A number of disintegrants are available on the market. They improve tablets’ disintegration. The objective of this work is the comparison of the technological quality parameters of disintegrants using different analytical techniques. Three batches of disintegrants and their binary mixtures (water:disintegrants) were investigated. Cooling experiments were used from –30 up to 200°C. The data obtained showed calorimetric differences between the samples. In the binary mixtures water showed different crystallization behaviour from the one found in the literature. According to the results DSC technique helped the quality control of different disintegrants.     

Synthesis of 1,2-cis-Configurated Glycosylphosphonates

A synthesis of 1,2-cis-configurated, non-isosteric phosphonate analogues of aldose-1-phosphates is described. Treatment of 1-O-acyl-glycoses 1 , 7 , 13 , and 19 with trialkyl phosphite in the presence of trimethylsilyl trifluoromethanesulfonate gave the 1,2-cis-configurated glycosylphosphonates 2 , 4 , 8 , 10 , 14 , 16 , 20 , and 22 as the major anomers and the 1,2-trans-configurated glycosylphosphonates 3 , 5 , 9 , 11 , 15 , 17 , 21 , and 23 as the minor anomers. The 1,2-cis-configurated phosphonates 4 , 10 , 16 , and 22 were deprotected to give the (β-D -glucopyranosyl)phosphonate 6 , the (β-D -mannopyranosyl)phosphonate 12 , the (β-D -ribofuranosyl)phosphonate 18 , and the (β-D -arabinofuranosyl)phosphonate 24 , respectively, in high yields. The preferred formation of 1,2-cis-configurated phosphonates is explained by postulating an equilibrium between the anomeric phosphonium-salt intermediates (such as 25 and 26 ) and a stabilization of the cis-configurated salts through formation of a pentacoordinated species (such as 28 ).     

Thermodynamic characterization of different actin isoforms

Summary The thermodynamic properties of the cardiac and skeletal a-actin isoforms were studied to characterize the molecular bases of the functional differences between them with the method of differential scanning calorimetry (DSC). The thermal properties of the actin filaments were described in the presence of calcium and magnesium ions as well. Based on the calculated free energy changes the α-cardiac actin filaments appeared to be more stable in its physiologically more relevant, magnesium saturated form. The magnesium saturated form of the α-cardiac actin filaments seemed to be more stable compared to the calcium saturated form of it. The enthalpy and entropy changes could differentiate between the α-cardiac and α-skeletal actin isoforms and between the calcium and magnesium saturated cardiac actin isoforms as well. Our results can demonstrate that the few differences between the amino acid sequences of the α-actin isoforms have an influence on the thermal properties and maybe on the function of these proteins as well.     

Molecular basis for antifreeze activity difference of two insect antifreeze protein isoforms

The insect spruce budworm(Choristoneura fumiferana) produces antifreeze protein(AFP) to assist in the protection of the over-wintering larval stage and contains multiple isoforms. Structures for two isoforms,known as CfAFP-501 and CfAFP-337,show that both possess similar left-handed β-helical structure,although thermal hysteresis activity of the longer isoform CfAFP-501 is three times that of CfAFP-337. The markedly enhanced activity of CfAFP-501 is not proportional to,and cannot be simply accounted for,by the increased ice-binding site resulting from the two extra coils in CfAFP-501. In or-der to investigate the molecular basis for the activity difference and gain better understanding of AFPs in general,we have employed several different computational methods to systematically study the structural properties and ice interactions of the AFPs and their deletion models. In the context of intact AFPs,a majority of the coils in CfAFP-501 has better ice interaction and causes stronger ice lattice disruption than CfAFP-337,strongly suggesting a cooperative or synergistic effect among β-helical coils. The synergistic effect would play a critical role and make significant contributions to the anti-freeze activity β-helical antifreeze proteins. This is the first time that synergistic effect and its implica-tion for antifreeze activity are reported for β-helical antifreeze proteins.     

A convenient protocol for selective cleavage of 2-hydroxy acid amides. Application to semisynthesis of the cyclic heptapeptide aza HUN-7293

A two-step protocol for the first chemoselective cleavage of 2-hydroxy acid amides has been developed. Mesylation of the model substrate 2-(hydroxypropionylamino)-4-methylpentanoic acid methyl ester (11) followed by treatment with N-ethylthiourea (13) allows cleavage of 2-hydroxy acid amides under smooth conditions. Successful application of this methodology to the open-chain transesterification product 15 (methylester) of the cyclic heptadepsipeptide HUN-7293, a potent inhibitor of inducible cell adhesion molecule expression, delivered the corresponding hexapeptide 18 with unprotected N-terminus in 70-75% yield. This result demonstrates that the protocol developed even works in the presence of an ester and several methylated and unmethylated amide bonds. Finally, a sequence of ligation of methyl D-dehydroglutaminate (20) to the C-terminus of the saponification product 21, followed by the degradation protocol and ring closure, allowed chemical "point mutation" at the DGCN site affording the aza analogue of HUN-7293 (24) in 15% overall yield. To the best of our knowledge this is the first report on chemoselective cleavage of 2-hydroxy acid amides.     

Reaction of Ru3(CO)12 with but-2-yn-1,4-diol in CH3OH/KOH solution. Crystal structure of (μ-Cl)Ru3(CO)9[μ3-η-H2CCC(H)CH2]

The reaction of Ru₃(CO)₁₂ with but-2-yn-1,4-diol (HOCH₂CCCH₂OH, BUD) in CH₃OH/KOH followed by acidification with HCl leads to four products, one of which has been identified as the title complex (μ-Cl)Ru₃(CO)₉[μ₃-η⁴-H₂CCC(H)CH₂]. This is an open cluster containing a bridging Cl atom on the open side and a C₄H₅ moiety bound to all the metals. The structure of the complex has been determined by X-ray analysis.The thermal reaction of Ru₃(CO)₁₂ with BUD has been revisited for a comparison with the results in alkaline solution. The main product is the allylic derivative HRu₃(CO)₉[HCCHCCHO].     

Di- and trinuclear Zn2+ complexes of calix[4]arene based ligands as catalysts of acyl and phosphoryl transfer reactions

The calix[4]arene scaffold, blocked in the cone conformation by proper alkylation of the lower rim hydroxyls, was used as a convenient molecular platform for the design of bi- and trimetallic Zn2+ catalysts. The catalytic activity of the Zn2+ complexes of calix[4]arenes decorated at the 1,2-, 1,3-, and 1,2,3-positions of the upper rim with 2,6-bis[(dimethylamino)methyl]pyridine units were investigated in the cleavage of ester 6 and of the RNA model compound HPNP. High rate enhancements, up to 4 orders of magnitude, were observed in a number of catalyst-substrate combinations. Interestingly the order of catalytic efficiency among regioisomeric dinuclear complexes in the cleavage of ester 6 is 1,2-vicinal > 1,3-distal, but it is reversed in the reaction of HPNP. The higher efficiency of trinuclear compared to dinuclear complexes provides an indication of the cooperation of three Zn2+ ions in the catalytic mechanism.