Dynamic solvation in imidazolium-based ionic liquids on short time scales

Steady-state and time-resolved Stokes shift data for the probe coumarin 153 in two imidazoles, six imidazolium-based ionic liquids, and several other solvents are presented. These results are consistent with our original suggestion (J. Phys. Chem. B 2004, 108, 10245-10255) that initial solvation is dominated by the organic moiety of the ionic liquid, and they show that for the imidazole-based liquids initial solvation is in all cases very rapid. Solvation by methylimidazole and butylimidazole is complete in 100 ps, and all of the imidazolium ionic liquids demonstrate similarly rapid initial solvation. Owing to the importance of determining the amount of initial solvation that is missed in a given experiment with finite time resolution, we discuss a method of estimating the intramolecular contribution to the reorganization energy. This method yields 2068 cm(-1) and is compared with an alternative method.     

Determination of N-nitroso derivatives of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) in soils by pressurized liquid extraction and liquid chromatography-electrospray ionization mass spectrometry

To aid in the evaluation of the potential toxicity of N-nitroso derivatives of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), we describe a pressurized liquid extraction (PLE) followed by liquid chromatography-electrospray ionization-mass spectrometry (LC-ESI-MS) method for determination of RDX and its N-nitroso derivatives: hexahydro-1-nitroso-3,5-dinitro-1,3,5-triazine (MNX), hexahydro-1,3-dinitroso-5-nitro-1,3,5-triazine (DNX), and hexahydro-1,3,5-trinitroso-1,3,5-triazine (TNX) in soils. Sandy loam soil was spiked with RDX and its N-nitroso derivatives (MNX, DNX, and TNX). Acetonitrile was used as the PLE extraction solvent at 100 degrees C and 1500 psi for 15 min. Florisil was used to cleanup extracts following PLE. Instrumental analysis employed LC-ESI-MS, in which 1mM acetic acid was added to the mobile phase to facilitate formation of acetate adduct ions [M+CH(3)COO](-). The method detection limits (MDLs) for RDX, MNX, DNX, and TNX were 1.46, 1.46, 1.69, and 1.93 ng/g, respectively. High recovery (91.1-108.3%), good precision (RSD: 3.2-12.4%), and reproducibility were achieved. This method proved effective and was applied to monitor the reductive biotransformation of MNX in soils with the presence of earthworms (Eisenia fetida).     

Conidial pigmentation is important to tolerance against solar-simulated radiation in the entomopathogenic fungus Metarhizium anisopliae

The importance of conidial pigmentation to solar UV radiation tolerance in the entomopathogenic fungus Metarhizium anisopliae var. anisopliae, was estimated by comparing the effects of exposure to simulated solar UV radiation on the wild-type parent strain U.S. Department of Agriculture (USDA)-Agricultural Research Service (ARS) Collection of Entomopathogenic Fungal Cultures (ARSEF) 23, which has dark green conidia, and three groups of color mutants with yellow, purple and white conidia. The comparisons included inactivation levels and the kinetics of germination of conidia exposed or not exposed to simulated solar UV radiation. In addition to significantly inactivating the conidia of different mutants, exposure to radiation delayed for several hours the germination of surviving conidia of the wild type and all mutants. In general, mutants with white conidia were more sensitive to simulated solar UV radiation than mutants with purple conidia, which were more sensitive than mutants with yellow conidia, which in turn were more sensitive than the green wild strain. A significant variation in tolerance to simulated solar radiation was observed among mutants within each color group, particularly among mutants with yellow conidia. Revertants with green conidia, DWR 179 and DWR 176, were obtained from the very sensitive UV mutants DWR 148 (yellow conidia) and DWR 149 (purple conidia), respectively. These revertants had levels of tolerance to simulated solar UV radiation similar to those of the wild-type ARSEF 23. This observation is strong evidence of the importance of green conidial pigmentation for tolerance to simulated solar UV radiation, a factor that could be manipulated to produce M. anisopliae strains with more tolerance to solar UV radiation.     

Affinity partitioning of a Cellulomonas fimi beta-mannanase with a mannan-binding module in galactomannan/starch aqueous two-phase system

A new approach in affinity separations was studied by partitioning of Cellulomonas fimi beta-mannanase (EC 3.2.1.78) containing a mannan-binding module in galactomannan/hydroxypropyl starch aqueous two-phase system. Comparison was made with a truncated version of C. fimi beta-mannanase which lacked the mannan-binding module. Results showed that affinity partitioning of the beta-mannanase was achieved due to biospecificity of the mannan-binding module towards the top phase containing galactomannan. Experiments were conducted at pH 8 to prevent enzyme degradation of the phase containing galactomannan. Removal of the top phase polymer was accomplished by beta-mannanase degradation allowed by shifting to the optimal pH 6. In the combination with the genetic fusion of any given protein to the mannan-binding module, the results envision a general procedure for primary affinity recovery of such fusion proteins.     

Determination of solute partition behavior with room-temperature ionic liquid based micellar gas-liquid chromatography stationary phases using the pseudophase model

The use of micelles in ionic liquid based gas-chromatography stationary phases was evaluated using equations derived for a "three-phase" model. This model allows the determination of all three partition coefficients involved in the system, and elucidates the micellar contribution to retention and selectivity. Four types of micellar-ionic liquid columns were examined in this study: 1-butyl-3-methylimidazolium chloride with sodium dodecylsulfate or dioctyl sulfosuccinate, and 1-butyl-3-methylimidazolium hexafluorophosphate with polyoxyethylene-100-stearyl ether or polyoxyethylene-23-lauryl ether. The partition coefficients were measured for a wide range of probe molecules capable of a variety of types and magnitudes of interactions. In general, most probe molecules preferentially partitioned to the micellar pseudophase over the bulk ionic liquid component of the stationary phase. Therefore, addition of surfactant to the stationary phase usually resulted in greater solute retention. It is also shown that the selectivity of the stationary phase is significantly altered by the presence of micelles, either by enhancing or lessening the separation. The effects of surfactant on the interaction parameters of the stationary phase are determined using the Abraham solvation parameter model. The addition of sodium dodecylsulfate and dioctyl sulfosuccinate to 1-butyl-3-methylimidazolium chloride stationary phases generally increased the phase's hydrogen bond basicity and increased the level of dispersion interaction. Polyoxyethylene-100-stearyl ether and polyoxyethylene-23-lauryl ether surfactants, however, enhanced the pi-pi/n-pi, polarizability/dipolarity, and hydrogen bond basicity interactions of 1-butyl-3-methylimidazolium hexafluorophosphate to a greater degree than the ionic surfactants with 1-butyl-3-methylimidazolium chloride. However, these nonionic surfactants appeared to hinder the ability of the stationary phase to interact with solutes via dispersion forces. Therefore, it is possible to effectively predict which analytes will be most highly retained by these micellar-ionic liquid stationary phases.     

Evaluating the bioavailability of explosive metabolites, hexahydro-1-nitroso-3,5-dinitro-1,3,5-triazine (MNX) and hexahydro-1,3,5-trinitroso-1,3,5-triazine (TNX), in soils using passive sampling devices

The uptake kinetics of two major RDX (hexahydro-1,3,5-trinitro-1,3,5-triazacyclohexane) metabolites, hexahydro-1-nitroso-3,5-dinitro-1,3,5-triazine (MNX) and hexahydro-1,3,5-trinitroso-1,3,5-triazine (TNX), into passive sampling devices (PSDs), and the ability of PSDs to serve as surrogates for evaluating bioavailability of MNX and TNX were investigated in laboratory sand and two soil types. The results indicate that MNX and TNX absorption into PSDs was best fitted with a polynomial curve model: y = ax2 + bx + c (y: amount of MNX or TNX absorbed into PSD; x: incubation time of PSDs in soil), with an excellent correlation coefficient (>0.95) for each type of soil amended with 10 mg/kg MNX or TNX. TNX was more readily absorbed by PSDs than MNX. Soil conditions, especially organic matter content, affected MNX and TNX uptake into PSDs. A relatively good correlation between MNX and TNX uptake into PSDs and uptake into earthworms was obtained in two types of natural soils (a silt loam soil from Nebraska and a sandy loam soil from Texas) and laboratory sand. A linear relationship between PSD uptake and earthworm uptake was observed. The correlation coefficients (r2) were > or = 0.82 for all test soils spiked with MNX or TNX. Organic matter content is one soil factor that affected the ratio of MNX or TNX uptake into earthworms versus uptake into PSDs. These data indicate that C18 PSDs may be used as a surrogate for soil organisms such as earthworms and provide a simple and easy chemical test for assessing the bioavailability of contaminants in soils.     

Separation and preconcentration procedures for the determination of lead using spectrometric techniques: a review

Lead is recognized worldwide as a poisonous metal. Thus, the determination of this element is often required in environmental, biological, food and geological samples. However, these analyses are difficult because such samples contain relatively low concentrations of lead, which fall below the detection limit of conventional analytical techniques such as flame atomic absorption spectrometry and inductively coupled plasma optical emission spectrometry. Several preconcentration procedures to determine lead have therefore been devised, involving separation techniques such as liquid-liquid extraction, solid phase extraction, coprecipitation and cloud point extraction. Citing 160 references, this paper offers a critical review of preconcentration procedures for determining lead using spectroanalytical techniques.     

Homogeneous decomposition of aryl- and alkylimido precursors for the chemical vapor deposition of tungsten nitride: a combined density functional theory and experimental study

MOCVD growth of tungsten nitride (WN(x)()) and tungsten carbonitride (WN(x)()C(y)()) thin films has been reported from the complexes Cl(4)(CH(3)CN)W(NR) (1: R = Ph; 2: R = (i)Pr; 3: R = C(3)H(5)). To evaluate the role of the imido substituent in film growth, gas-phase homogeneous decomposition of precursor molecules was investigated using density functional theory (DFT) calculations. Computational results and NMR kinetics of acetonitrile exchange by 2 in solution verified that dissociation of the acetonitrile ligand should be facile for 1-3 in the temperature range used for film growth (>450 degrees C). A computational search for transition states for cleavage of W-Cl bonds in the presence of H(2) carrier gas was consistent with a sigma-bond metathesis pathway. Natural bonding orbital (NBO) analysis and bond energy calculations indicated that 1 has a stronger N-C(imido) bond and a slightly weaker W-N bond than 2 and 3, suggesting a greater role for W-N bond cleavage in depositions from 1. These results are consistent with mass spectrometric fragmentation patterns from 1-3 and low nitrogen content in films deposited from 1 as compared to those from 2 and 3.     

Rational design of a beta-lactamase inhibitor achieved via stabilization of the trans-enamine intermediate: 1.28 A crystal structure of wt SHV-1 complex with a penam sulfone

beta-Lactamases are one of the major causes of antibiotic resistance in Gram negative bacteria. The continuing evolution of beta-lactamases that are capable of hydrolyzing our most potent beta-lactams presents a vexing clinical problem, in particular since a number of them are resistant to inhibitors. The efficient inhibition of these enzymes is therefore of great clinical importance. Building upon our previous structural studies that examined tazobactam trapped as a trans-enamine intermediate in a deacylation deficient SHV variant, we designed a novel penam sulfone derivative that forms a more stable trans-enamine intermediate. We report here the 1.28 A resolution crystal structure of wt SHV-1 in complex with a rationally designed penam sulfone, SA2-13. The compound is covalently bound to the active site of wt SHV-1 similar to tazobactam yet forms an additional salt-bridge with K234 and hydrogen bonds with S130 and T235 to stabilize the trans-enamine intermediate. Kinetic measurements show that SA2-13, once reacted with SHV-1 beta-lactamase, is about 10-fold slower at being released from the enzyme compared to tazobactam. Stabilizing the trans-enamine intermediate represents a novel strategy for the rational design of mechanism-based class A beta-lactamase inhibitors.     

Antiparallel-aligned neutral-ground-state and zwitterionic chromophores as a nonlinear optical material

Efficient noncentrosymmetric arrangement of nonlinear optical (NLO) chromophores with high first-order hyperpolarizability (beta) for increased electro-optical (EO) efficiency has proven challenging as strong dipolar interactions between the chromophores encourage antiparallel alignment, attenuating the macroscopic EO effect. This work explores a novel approach to simultaneously achieve large beta values while providing an adjustable dipole moment by linking a strong neutral-ground-state (NGS) NLO chromophore with positive beta to a zwitterionic (ZWI) chromophore with negative beta in an antiparallel fashion. It is proposed that the overall beta of such a structure will be the sum of the absolute values of the two types of chromophores while the dipole moment will be the difference. Molecules 1-3 were synthesized to test the feasibility of this approach. Molecular dynamics calculations and NMR data supported that the NGS chromophore component and the ZWI chromophore component self-assemble to an antiparallel conformation in chloroform. Calculations showed that the dipole moment of 1 is close to the difference of the two component chromophores. Hyper-Rayleigh scattering (HRS) studies confirmed that the first hyperpolarizability of 1 is close to the sum of the two component chromophores. These results support the idea that an antiparallel-aligned neutral-ground-state chromophore and a zwitterionic chromophore can simultaneously achieve an increase in beta and a decrease of the dipole moment.