Photometric titrations with indicators

Various types of photometric titration curves are discussed. If a metal M is titrated conipleximetrically using a metal indicator and the absorbance is plotted vs. the titrant consumed, the inflection point appears at a pM value defined by the equation 3 pM_infl = pM_trans + 2 pM_eqThis expression is valid when M combines in a 1 : 1 ratio with the complexing agent and the indicator and when the indicator concentration is small compared to the total metal concentration.The difference between the pM values at the inflection and equivalence points can be calculated from the equation ΔpM = pM_infl — pM_eq = $\text{1}\text{3}$(pM_trans — pM_eq) = $\text{1}\text{6}$log(C_MK²_MI/K_MY)If the inflection point is taken as the equivalence point, the error arising can be calculated from ΔpM, or more simply, read from a diagram.If transmittance, instead of absorbancc, is plotted as a function of the titrant volume, the inflection point depends on the added amount of indicator. However, at high transmittance values, i.e., at low indicator concentrations, the inflection point of a transmittance curve occurs practically at the same volume of added titrant as the inflection point of an absorbance curve. Rules are given for applying an indicator correction for the amount of metal bound to the indicator at the end-point.The derived equations and discussions can also be applied to acid-base titrations.     

Mechanism and kinetics of protein transport in chromatographic media studied by confocal laser scanning microscopy. Part I. The interplay of sorbent structure and fluid phase conditions

An experimental study on the interplay of sorbent structure and fluid phase conditions (pH) has been carried out examining adsorption and transport of bovine serum albumin (BSA) and a monoclonal antibody (IgG 2a) on SP Sepharose Fast Flow and SP Sepharose XL. SP Sepharose Fast Flow is characterised by a relatively open pore network, while SP Sepharose XL is a composite structure with ligand-carrying dextran chains filling the pore space. Both adsorbents have similar ionic capacity. Protein transport and adsorption profiles were evaluated using confocal laser scanning microscopy. Under all investigated conditions, BSA uptake could be adequately explained by a pore diffusion mechanism. The adsorption profiles obtained for IgG 2a, however, indicated that changes in fluid phase conditions as well as a change in the solid phase structure could result in a more complex uptake mechanism as compared to pore diffusion alone. This mechanism results in a fast transport of proteins into the adsorbent, followed by an overshoot of protein in the center of the sorbent and a setback towards a homogeneous adsorption profile.     

Capillary isoelectric focusing of proteins utilizing poly(vinylpyrrolidone)- and plexiglas-coated columns

Fused-silica capillaries chemically derivatized with silane/poly(vinylpyrrolidone) (PVP) or dynamically modified with plexiglas [poly(methyl methacrylate)] were prepared and evaluated with regard to column stability and separation performance for capillary isoelectric focusing of standard proteins. The PVP coating showed the better stability and was good for at least 100 runs while the plexiglas coating started to deteriorate after about 30 runs. The time spent for the plexiglas coating is about 40 minutes while the PVP coating requires two days. The migration time reproducibility was better with the PVP capillary (RSD 0.7-1.6%, n = 5) compared to the plexiglas-coated column (RSD 1.2-2.9%, n = 5) while peak area and height varied over a similar interval (RSD 2-28.1% area; 0.9-22.7% height, n = 5). The two most consistent proteins in this evaluation, viz. myoglobin A and carbonic anhydrase II, showed linear dynamic ranges between 5-150 and 5-50 microg/mL, and limits of detections at 2 and 1 microg/mL, respectively, employing UV detection at 280 nm.     

Synthesis and characterization of molybdenum oxo complexes of two tripodal ligands: reactivity studies of a functional model for molybdenum oxotransferases

Reaction of the tetradentate ligand N-(2-hydroxybenzyl)-N,N-bis(2-pyridylmethyl)amine (L-OH) with MoO2Cl2 in methanol in the presence of NaOMe and PF6- results in the formation of [MoO2(L-O)]PF6. Similarly, the reaction of N-(2-mercaptobenzyl)-N,N-bis(2-pyridylmethyl)amine (L-SH) with MoO2(acac)2 leads to the formation of [MoO2(L-S)]+. The dioxo-molybdenum complex [MoO2(L-O)]+ reacts with phosphines in methanol to afford phosphine oxides and an air-sensitive molybdenum complex, tentatively identified as [Mo(IV)O(L-O)(OCH3)]. The latter complex is capable of reducing biological oxygen donors such as DMSO or nitrate, thereby mimicking the activity of DMSO reductase and nitrate reductase. Reaction of [MoO2(L-O)]PF6 with PPh3 in other solvents than methanol leads to the formation of the Mo(V) dimer [(L-O)OMo(micro-O)MoO(L-O)](PF6)2. The crystal structures of [MoO2(L-O)]PF6 and the micro-oxo bridged dimer are presented.     

Determination of cholecalciferol (vitamin D3) in selected foods by liquid chromatography: NMKL collaborative study

Results are presented from an NMKL (Nordic Committee on Food Analysis) collaborative study of a method for the determination of cholecalciferol (vitamin D3) in foods. The method is based on the addition of an internal standard (vitamin D2), followed by saponification and extraction with n-heptane. The fraction that contains vitamin D2/D3 is separated by preparative normal-phase liquid chromatography (LC), and the analytes are determined by reversed-phase LC with UV detection at 265 nm. The method was tested by 8 participating laboratories. In this study 6 different matrixes were analyzed for cholecalciferol content: milk, liquid infant formula (gruel), cooking oil, margarine, infant formula, and fish oil. The contents varied from 0.4 to 12 microg/100 g. Three matrixes (milk, gruel, and margarine) were fortified with vitamin D3. In the other matrixes, vitamin D3 was added at 3 different levels at the Swedish National Food Administration. The milk was analyzed as a blind duplicate, whereas the other matrixes were analyzed as split-level pairs. The recoveries from the samples with vitamin D3 added varied from 93 to 102%. The repeatability relative standard deviation (RSDr) values for accepted results varied between 2.2% (fish oil) and 7.4% (cooking oil), whereas the reproducibility relative standard deviation (RSD(R)) values varied between 6.8% (margarine) and 24% (cooking oil).     

Complexometric titration of Aluminium

A procedure is given for the complexometric titration of aluminium. A known volume of a standard solution of EDTA is added to the sample solution, and the excess is back-titrated with a zinc sulphate solution, dithizone being used as indicator. The titration is performed at pH = 4.0 — 4.5 and 40 — 50% alcohol is added as solvent for the indicator.The theoretical basis of the method is developed, and the theoretical titration error with various amounts of aluminium and zinc is calculated.The results of some titrations are given.     

Regiochemical Control and Suppression of Double Bond Isomerization in the Heck Arylation of 1-(Methoxycarbonyl)-2,5-dihydropyrrole

Arylation of 1-(methoxycarbonyl)-2,5-dihydropyrrole under standard Heck reaction conditions produces a mixture of compounds. The olefin undergoes two types of palladium-catalyzed reactions: (a) arylation to provide C-3 arylated derivatives and (b) competing double bond isomerization. Addition of silver carbonate and thallium acetate fully suppressed the isomerization, and good yields of C-3 substituted compounds were achieved after arylation with aryl halides. With regard to aryl triflates as arylating agents, addition of lithium chloride was necessary to promote the Heck reaction. This additive excluded the use of silver and thallium salts, but high regioselectivity and good yields could be obtained by employing tri-2-furylphosphine as ligand. Arylation was rendered both regioselective and enantioselective (58% ee) with 1-naphthyl triflate as substrate utilizing a (R)-BINAP/thallium acetate combination. The C-3 arylated enamides were converted further into the corresponding 3-arylpyrrolidines.     

Investigation of a cylindrical chemosorptive denuder for sampling and phase separation of toluene diisocyanate aerosols

A cylindrical chemosorptive denuder in series with a glass fibre filter has been evaluated for sampling toluene diisocyanate (TDI) aerosols. The sampler is designed for measuring personal exposure to diisocyanates. Several denuder coatings and derivatising reagents were investigated. Dimethylpolysiloxane (SE-30) and 5% phenyl dimethylpolysiloxane (SE-54) with either dibutylamine (DBA) or dipentylamine (DPeA) as derivatising reagents yielded the lowest vapour breakthrough (the amount (%) of the vapour that passes through the denuder), close to values predicted by theory. Immobilisation of the SE-30 denuder coating by in-situ cross-linking yielded comparable results. With an SE-30/DBA-coated denuder operating within an airflow range of 100–500 mL min^–1, the phase separation was shown to be consistent with theoretical predictions derived by use of the Gormley–Kennedy equation. This provides a means of calculating the vapour breakthrough and correcting experimentally obtained values with regard to vapour–particulate phase distribution, suggesting that the denuder can provide accurate phase-distribution measurements. The SE-30/DBA denuder can be used over a concentration range spanning nearly six orders of magnitude. Its capacity is sufficient to perform 15-min exposure measurements of a TDI aerosol with air concentrations as high as 1,700 g m^–3, 40 times higher than the Swedish occupational exposure limit (OEL). At the other end of the range, the estimated limit of detection (LOD) was less than 2 ng m^–3 for both the vapour and the aerosol phases when LC–ESI–MS–MS was used for chemical analysis.Electronic Supplementary Material Supplementary material for this article is available at     

Cycloaddition reactions of 2,3-didehydrothiophene generated by flow vacuum thermolysis of thiophene-2,3-dicarboxylic anhydride

Flow vacuum thermolysis (FVT) of thiophene-2,3-dicarboxylic anhydride ($\text{2}$) in the presence of 2,3-dimethylbutadiene ($\text{6}$) gives, in addition to 5,6-dimethylthianaphthene ($\text{9}$). small quantities of a dihydrodimethylthianaphthene ($\text{12}$) and another dimethylthianaphthene ($\text{13}$) which is probably also formed by dehydrogenation of $\text{12}$ with chloranil. The partial structures of these minor products are consistent with their being formed by a [2+2]-cycloaddition between $\text{6}$ and an intermediate aryne, 2,3-didehydrothiophene ($\text{1}$), followed by a rearrangement of the resulting adduct $\text{11}$ and dehydrogenation. FVT of $\text{2}$ in the presence of 2,5- ($\text{17b}$) or 3,4-dimethylthiophene ($\text{17c}$) also gave a mixture of the dimethylthianaphthenes ($\text{18}$$\text{22}$, $\text{23}$) which can be rationalized as arising by a [4+2]- and two [2+2]-cycloadditions of the aryne $\text{1}$ to the thiophenes $\text{17}$ with subsequent desulfurization. The lack of equilibration of the products $\text{18}$, $\text{22}$ and $\text{23}$, was demonstrated and their origin as a function of the structure and reactivity of the aryne $\text{1}$ discussed.