An LCEC method for the analysis of synthetic amino acids in fruit juices

Summary A fast and simple HPLC-method for the determination of synthetic amino acids in adulterated orange juice has been developed. The amino acid enantiomers were derivatized with a chiral reagent and the derivatives separated on a 3 m particle size C₁₈ column. An electrochemical detector operating in the oxidative mode was used for detection. The potential at which the derivatives are oxidized was determined by cyclic voltammetry.By using selective (electrochemical) detection it is possible to reduce the sample clean-up to simple centrifugation and filtration steps.     

Determination of organophosphate esters in air samples by dynamic sonication-assisted solvent extraction coupled on-line with large-volume injection gas chromatography utilizing a programmed-temperature vaporizer

An on-line method for the determination of airborne organophosphate esters based on dynamic sonication-assisted solvent extraction and large-volume injection (LVI) gas chromatography with nitrogen-phosphorous detection is introduced. The LVI is performed with a programmed-temperature vaporizer. The entire extracted fraction of 800 microl (hexane-methyl-tert.-butyl ether, 7:3, v/v) is introduced directly into the GC system without any clean-up step following extraction. The extraction and analysis step were completed in less than 15 min. The limit of detection of the investigated organophosphate esters was established to be in the range of 5-32 pg/filter. The correlation coefficients (r2) were investigated in the linear range study of the entire system and established to be approximately 0.9900 for all the investigated organophosphates esters. Applications of the method was demonstrated with the extraction of air samples collected onto glass fiber filters from different indoor environments. Six organophosphate esters were found at the levels 0.4-138 ng/m3.     

Mass transfer limitation in thermogravimetry of biomass gasification

In order to determine the intrinsic reactivity behavior from thermogravimetry studies, the experimental conditions should be such that the reactions are not mass transfer limited. Biomass char usually has a higher reactivity than coal chars. Therefore, mass transfer limitations may be more problematic when studying biomass char reactivity. Chemical reaction kinetics and mass transfer processes present in thermogravimetry are used for modeling the overall reaction rate for spruce bark CO₂ gasification. Thermogravimetric experiments are carried out between 700 and 900 °C, and the CO₂ concentration is varied between 10 and 90 vol%. The intrinsic activation energy is found to be 120 kJ mol^?1. The transition temperature between regimes I and II is here defined when the fraction apparent to true activation energy equals 0.75. Higher external mass transfer (e.g., by decreasing the diffusion path through the crucible’s freeboard), decreasing the sample amounts, and higher CO₂ partial pressures for the Langmuir–Hinshelwood reaction type increase the transition temperature. The results show that the transition temperature between regimes I and II conditions is approx. 1,030 °C for 90 vol% CO₂.     

Solar Thermal Energy Storage in a Photochromic Macrocycle

The conversion and efficient storage of solar energy is recognized to hold significant potential with regard to future energy solutions. Molecular solar thermal batteries based on photochromic systems exemplify one possible technology able to harness and apply this potential. Herein is described the synthesis of a macrocycle based on a dimer of the dihydroazulene/vinylheptafulvene (DHA/VHF) photo/thermal couple. By taking advantage of conformational strain, this DHA–DHA macrocycle presents an improved ability to absorb and store incident light energy in chemical bonds (VHF–VHF). A stepwise energy release over two sequential ring‐closing reactions (VHF→DHA) combines the advantages of an initially fast discharge, hypothetically addressing immediate energy consumption needs, followed by a slow process for consistent, long‐term use. This exemplifies another step forward in the molecular engineering and design of functional organic materials towards solar thermal energy storage and release.     

Wheel/rail noise generation due to nonlinear effects and parametric excitation

Two models are developed, one in the time domain and another in the frequency domain, to explain when a wheel/rail noise generation model requires the inclusion of discrete supports, parametric excitation, and the nonlinear contact spring. Numerical simulations indicate the inclusion of discrete supports to describe low frequency response, and also at higher frequencies, especially where the rail is very smooth or has a corrugation/wavelength corresponding to the pinned-pinned frequency. With a corrugation, it may become essential to include the nonlinear contact spring, as contact loss occurs at high corrugation amplitudes. As nonlinearity causes force generation over a broad frequency range, some contributions excite wheel resonances, resulting in high radiation levels, that require the inclusion of wheel/rail nonlinear effects and parametric excitation for accurate prediction.     

Control of oral closure in lingual stop consonant production

Previous work has shown that the lips are moving at a high velocity when the oral closure occurs for bilabial stop consonants, resulting in tissue compression and mechanical interactions between the lips. The present experiment recorded tongue movements in four subjects during the production of velar and alveolar stop consonants to examine kinematic events before, during, and after the stop closure. The results show that, similar to the lips, the tongue is often moving at a high velocity at the onset of closure. The tongue movements were more complex, with both horizontal and vertical components. Movement velocity at closure and release were influenced by both the preceding and the following vowel. During the period of oral closure, the tongue moved through a trajectory of usually less than 1 cm; again, the magnitude of the movement was context dependent. Overall, the tongue moved in forward-backward curved paths. The results are compatible with the idea that the tongue is free to move during the closure as long as an airtight seal is maintained. A new interpretation of the curved movement paths of the tongue in speech is also proposed. This interpretation is based on the principle of cost minimization that has been successfully applied in the study of hand movements in reaching.     

Photo-induced ligand substitution at a remote site via electron transfer in a porphyrin-appended rhenium carbonyl supermolecule

The photochemical and electrochemical properties of a Zn-porphyrin appended rhenium(I) tricarbonyl bipyridine 3-Me-pyridine complex have been investigated; visible-light sensitisation of electron transfer results in ligand substitution at a site remote from the chromophore.     

Synthesis of a 56 component library of sugar beta-peptides

Many biological processes of vital importance are triggered by the molecular recognition of small carbohydrate units by proteins and receptors thus leading to the belief that carbohydrates could act as candidates for the design of new drugs. We have developed a new useful synthetic approach, which can be applied in a combinatorial manner, giving access to 1,1-di-substituted pyrans projecting amide side chains in both the alpha- and beta-directions. Thus, treatment of the readily accessible hemiketal (1) with TFA followed by trimethylsilyl trifluoromethanesulfonate (TMSOTf) in the presence of a nitrile gives dihydrooxazinones (2) via a new type of modified intramolecular Ritter reaction. The dihydrooxazinones (2) can either be isolated or used directly in reactions with a broad variety of amines. Final deprotection furnishes the 1,1-di-substituted sugar beta-peptides having the general structure (4).     

Bi-laplacian growth patterns in disordered media

Experiments in quasi-two-dimensional geometry (Hele-Shaw cells) in which a fluid is injected into a viscoelastic medium (foam, clay, or associating polymers) show patterns akin to fracture in brittle materials, very different from standard Laplacian growth patterns of viscous fingering. An analytic theory is lacking since a prerequisite to describing the fracture of elastic material is the solution of the bi-Laplace rather than the Laplace equation. In this Letter we close this gap, offering a theory of bi-Laplacian growth patterns based on the method of iterated conformal maps.