Determination of cholecalciferol (vitamin D3) in selected foods by liquid chromatography: NMKL collaborative study

Results are presented from an NMKL (Nordic Committee on Food Analysis) collaborative study of a method for the determination of cholecalciferol (vitamin D3) in foods. The method is based on the addition of an internal standard (vitamin D2), followed by saponification and extraction with n-heptane. The fraction that contains vitamin D2/D3 is separated by preparative normal-phase liquid chromatography (LC), and the analytes are determined by reversed-phase LC with UV detection at 265 nm. The method was tested by 8 participating laboratories. In this study 6 different matrixes were analyzed for cholecalciferol content: milk, liquid infant formula (gruel), cooking oil, margarine, infant formula, and fish oil. The contents varied from 0.4 to 12 microg/100 g. Three matrixes (milk, gruel, and margarine) were fortified with vitamin D3. In the other matrixes, vitamin D3 was added at 3 different levels at the Swedish National Food Administration. The milk was analyzed as a blind duplicate, whereas the other matrixes were analyzed as split-level pairs. The recoveries from the samples with vitamin D3 added varied from 93 to 102%. The repeatability relative standard deviation (RSDr) values for accepted results varied between 2.2% (fish oil) and 7.4% (cooking oil), whereas the reproducibility relative standard deviation (RSD(R)) values varied between 6.8% (margarine) and 24% (cooking oil).     

Methods for research on immune complement activation on modified sensor surfaces

We have developed a methodological system consisting of a new surface sensitive quartz crystal microbalance with dissipation monitoring (QCM-D) sensor surfaces together with different surface modification methods for the investigation of surface associated complement activation in human sera. The QCM-D surface, 10 mm in diameter, was modified by spin-coating of poly(urethane urea) (PUUR) and polystyrene (PS). Some sensor surfaces were also sputtered with titanium (Ti) or modified by hydrophobic self-assembled monolayer (SAM) of an 18-carbon alkane thiol with a ---CH₃ end group. The amount of surface deposited complement protein was investigated by incubation of the modified sensor surfaces in human sera, followed by incubation with antibodies directed against complement factor 3c (C3c). The amounts of bound anti-C3c were then used as an arbitrary measure of surface induced complement activation. The order of complement activation of the different surfaces, as judged by three separate measurements per surface modification, was PUUR>PS=SAM>Ti. The Ti surface had a similar low degree of anti-C3c binding as the negative controls (heat inactivated sera). The novel QCM-D methodology was found to be very simple, accurate, sensitive and well suited as a screening method for complement activation and protein adsorption on different materials. We also compared the sensitivity of QCM-D method with surface plasmon resonance (SPR) for the quantification of protein adsorption and complement activation on gold sensor surfaces. The QCM-D method was equally sensitive as the SPR for the detection of protein adsorption from a solution independently if low flow rate (5 μl/min) was used. A slight increase in sensitivity was found at higher flow rate (30 μl/min). However, we found it difficult to use the SPR method on the Ti, PS and PUUR surfaces due to decreased light penetration of the modified SPR sensor chip.     

Complexometric titration of Aluminium

A procedure is given for the complexometric titration of aluminium. A known volume of a standard solution of EDTA is added to the sample solution, and the excess is back-titrated with a zinc sulphate solution, dithizone being used as indicator. The titration is performed at pH = 4.0 — 4.5 and 40 — 50% alcohol is added as solvent for the indicator.The theoretical basis of the method is developed, and the theoretical titration error with various amounts of aluminium and zinc is calculated.The results of some titrations are given.     

Perturbation bounds for theLDL H andLU decompositions

LetA andA+A be Hermitian positive definite matrices. Suppose thatA=LDL ^H and (A+A)=(L+L)(D+D)(L+L)^H are theLDL ^H decompositons ofA andA+A, respectively. In this paper upper bounds on |D| _F and |L| _F are presented. Moreover, perturbation bounds are given for theLU decomposition of a complexn ×n matrix.     

Prompt fission induced by antiproton annihilation at rest on heavy nuclei

Antiproton induced fission probabilities of U²³⁸, Bi²⁰⁹, Pb²⁰⁸ and Au¹⁷⁷ are reported together with the mass distribution of the fission fragments in the U²³⁸ and Bi²⁰⁹ cases. The charged particles multiplicities observed in co-incidence with fission have, also, been measured for U and Bi and are presented.Dedicated to Peter Armbruster on the occasion of his 60th birthday in recognition of his important contribution to modern Nuclear Physics     

Chip-Firing Games on Directed Graphs

We consider the following (solitary) game: each node of a directed graph contains a pile of chips. A move consists of selecting a node with at least as many chips as its outdegree, and sending one chip along each outgoing edge to its neighbors. We extend to directed graphs several results on the undirected version obtained earlier by the authors, P. Shor, and G. Tardos, and we discuss some new topics such as periodicity, reachability, and probabilistic aspects.Among the new results specifically concerning digraphs, we relate the length of the shortest period of an infinite game to the length of the longest terminating game, and also to the access time of random walks on the same graph. These questions involve a study of the Laplace operator for directed graphs. We show that for many graphs, in particular for undirected graphs, the problem whether a given position of the chips can be reached from the initial position is polynomial time solvable.Finally, we show how the basic properties of the probabilistic abacus can be derived from our results.     

Regiochemical Control and Suppression of Double Bond Isomerization in the Heck Arylation of 1-(Methoxycarbonyl)-2,5-dihydropyrrole

Arylation of 1-(methoxycarbonyl)-2,5-dihydropyrrole under standard Heck reaction conditions produces a mixture of compounds. The olefin undergoes two types of palladium-catalyzed reactions: (a) arylation to provide C-3 arylated derivatives and (b) competing double bond isomerization. Addition of silver carbonate and thallium acetate fully suppressed the isomerization, and good yields of C-3 substituted compounds were achieved after arylation with aryl halides. With regard to aryl triflates as arylating agents, addition of lithium chloride was necessary to promote the Heck reaction. This additive excluded the use of silver and thallium salts, but high regioselectivity and good yields could be obtained by employing tri-2-furylphosphine as ligand. Arylation was rendered both regioselective and enantioselective (58% ee) with 1-naphthyl triflate as substrate utilizing a (R)-BINAP/thallium acetate combination. The C-3 arylated enamides were converted further into the corresponding 3-arylpyrrolidines.     

Investigation of a cylindrical chemosorptive denuder for sampling and phase separation of toluene diisocyanate aerosols

A cylindrical chemosorptive denuder in series with a glass fibre filter has been evaluated for sampling toluene diisocyanate (TDI) aerosols. The sampler is designed for measuring personal exposure to diisocyanates. Several denuder coatings and derivatising reagents were investigated. Dimethylpolysiloxane (SE-30) and 5% phenyl dimethylpolysiloxane (SE-54) with either dibutylamine (DBA) or dipentylamine (DPeA) as derivatising reagents yielded the lowest vapour breakthrough (the amount (%) of the vapour that passes through the denuder), close to values predicted by theory. Immobilisation of the SE-30 denuder coating by in-situ cross-linking yielded comparable results. With an SE-30/DBA-coated denuder operating within an airflow range of 100–500 mL min^–1, the phase separation was shown to be consistent with theoretical predictions derived by use of the Gormley–Kennedy equation. This provides a means of calculating the vapour breakthrough and correcting experimentally obtained values with regard to vapour–particulate phase distribution, suggesting that the denuder can provide accurate phase-distribution measurements. The SE-30/DBA denuder can be used over a concentration range spanning nearly six orders of magnitude. Its capacity is sufficient to perform 15-min exposure measurements of a TDI aerosol with air concentrations as high as 1,700 g m^–3, 40 times higher than the Swedish occupational exposure limit (OEL). At the other end of the range, the estimated limit of detection (LOD) was less than 2 ng m^–3 for both the vapour and the aerosol phases when LC–ESI–MS–MS was used for chemical analysis.Electronic Supplementary Material Supplementary material for this article is available at     

A neutron powder diffraction study of the κ phase in the FeWC system

The crystal structure of the κ-carbide in the FeWC system has been refined from neutron powder diffraction data using the Rietveld profile analysis method. κ-(FeWC) is isostructural with κ-(CoWC); space group $\text{P6}{}_3\text{mmc}$; unit cell dimensions a = 7.7982(2)Å, c = 7.8298(4) Å. The structure refinement indicates $\text{Fe}\text{W}$ substitution at two of the tungsten sites, and 46% vacancies at one of the carbon sites. The composition corresponds to the formula Fe_3+xW_10?xC_4?y, with x = 0.57(3) and y = 0.46(1).