Design and analysis of a BLPC vocoder-based adaptive feedback cancellation with probe noise

The band-limited linear predictive coding (BLPC) vocoder-based adaptive feedback cancellation (AFC) removes the high-frequency bias, while the low frequency bias persists between the desired input signal and the loudspeaker signal in the estimate of the feedback path. In this paper, we present a BLPC vocoder-based adaptive feedback canceller with probe noise with an objective of reducing the low-frequency bias in digital hearing-aids. A step-wise mathematical analysis of the proposed feedback canceller is presented employing the recursive least square and normalized least mean square adaptive algorithms. It is observed that the optimal solution of the feedback path is unbiased for an unshaped probe noise, but is biased for a shaped probe signal; the bias term does not consist of correlation between the desired input and the loudspeaker output. The identifiability conditions are analysed and it is shown that a delay, greater than or equal to the length of the adaptive filter, must be introduced in the forward path to achieve an unbiased feedback path estimate. Algorithm analysis and computer simulations presented in this paper justify the reason for selecting the proposed design over the existing BLPC vocoder-based feedback cancellation algorithm.     

Analysis and design of optically transparent antenna on photonic band gap structures

An optically transparent microstrip patch antenna is designed on photonic bandgap structures and its radiation characteristics are computed and analyzed in the visible spectrum region. The proposed antenna consists of indium tin oxide, a transparent conducting material used both as a radiating patch and a ground plane separated by the 5 μm thin glass substrate. The introduction of periodic cylindrical air cavity structures in the glass substrate leads to the formation of photonic band gap. The patch thickness is carefully selected based on the analysis of the optical transmission coefficient with respect to patch thickness. The effective dielectric constant of the photonic band gap loaded glass substrate is computed using the effective medium approach. The refractive index of the proposed antenna is presented and discussed. The radiation efficiency of the antenna is shown to improve significantly due to insertion of proposed photonic band gap structures. The proposed design has yielded a bandwidth of 2–2.3 THz for a return loss (S₁₁) of less than −15dB and achieved a peak gain of 4.97dB at 2.27 THz.     

Chemiluminescence from alkoxy-substituted acridinium dimethylphenyl ester labels

Chemiluminescent acridinium dimethylphenyl ester labels are used in automated immunoassays for clinical diagnostics. Light emission from these labels is triggered by alkaline peroxide in the presence of the cationic surfactant cetyltrimethylammonium chloride (CTAC). The surfactant plays a critical role in the chemiluminescence process of these labels by both accelerating their emission kinetics and increasing total light output enabling high throughout and improved assay sensitivity in automated immunoassays. Despite the surfactant's crucial role in the chemiluminescent reaction, no study has investigated how structural perturbations in the acridinium ring could impact the influence of the surfactant. We describe herein the synthesis and properties of three new alkoxy-substituted, acridinium dimethylphenyl esters where the nature of the alkoxy group in the acridinium ring was varied (hydrophobic or hydrophilic). Chemiluminescence measurements of these alkoxy-substituted labels indicate that hydrophilic functional groups in the acridinium ring, in particular sulfobetaine zwitterions, disrupt surfactant-mediated compression of emission times but not enhancement of light yield. These results support the hypothesis that surfactant-mediated effects require the binding of two different reaction intermediates to surfactant aggregates and, that surfactants influence light emission from acridinium esters by two separate mechanisms. Our studies also indicate that preservation of both surfactant effects on acridinium ester chemiluminescence and low non-specific binding of the label can be achieved with a relatively hydrophobic acridinium ring coupled to a hydrophilic phenolic ester leaving group.     

Efficacy of End-Only-Functionalized Oligo(arylene-ethynylene)s in Killing Bacterial Biofilms

Cationic end-only-functionalized oligo(arylene-ethynylene)s (EO-OPEs) have recently been found to be broad-spectrum and effective antimicrobial agents because of their unique structure and optical properties. In this study, we investigated their potential use for preventing and reducing Escherichia coli (E. coli) biofilms. The Calgary biofilm device (CBD) was used to form bacterial biofilms of E. coli; in these studies, the minimum inhibitory concentration (MIC) and the minimum biofilm eradication concentration (MBEC) were determined. E. coli biofilms uniformly grow on pegs of the CBD device lid. The MIC values determined for EO-OPEs are comparable to those found for standard antibiotics such as kanamycin (MIC = 11.2 μg/mL). About 10-30 times the concentration of EO-OPEs was required to eradicate E. coli biofilms and prevent regrowth in the dark. Near-UV irradiation of EO-OPEs enhanced their efficacy in killing biofilms.     

Ba(1-x)K(x)Mn2As2: an antiferromagnetic local-moment metal

The compound BaMn2As2 with the tetragonal ThCr2Si2 structure is a local-moment antiferromagnetic insulator with a Néel temperature T(N)=625 K and a large ordered moment μ=3.9μ(B)/Mn. We demonstrate that this compound can be driven metallic by partial substitution of Ba by K while retaining the same crystal and antiferromagnetic structures together with nearly the same high T(N) and large μ. Ba(1-x)K(x)Mn2As2 is thus the first metallic ThCr2Si2-type MAs-based system containing local 3d transition metal M magnetic moments, with consequences for the ongoing debate about the local-moment versus itinerant pictures of the FeAs-based superconductors and parent compounds. The Ba(1-x)K(x)Mn2As2 class of compounds also forms a bridge between the layered iron pnictides and cuprates and may be useful to test theories of high T(c) superconductivity.     

Apparent molar volume and apparent molar adiabatic compressibility of 2-hydroxy-5-methyl acetophenone in <Emphasis Type="Italic">N,N</Emphasis>-dimethylformamide at different temperatures

The speed of sound and density of 2-hydroxy-5-methyl acetophenone in dimethylformamide have been measured over the range of temperatures 25–40 °C. From the experimentally determined data, values of apparent molar volume (V _ϕ), adiabatic compressibility (β_s), apparent molar adiabatic compressibility (K _s,ϕ) and their limiting values have been computed. Values at infinite dilution provide information regarding solute–solvent interaction. The density and velocity increases with increase in concentration and decreases with increase in temperature. These results have been analyzed in terms of molecular interactions between acetophenone and dimethylformamide.     

Development and validation of a stability-indicating RP-UPLC method for the quantitative analysis of nabumetone in tablet dosage form

High efficiency and less run time are the basic requirements of high-speed chromatographic separations. To fulfill these requirements, a new separation technique, ultra-performance liquid chromatography (UPLC), has shown promising developments. A rapid, specific, sensitive, and precise reverse-phase UPLC method is developed for the determination of nabumetone in tablet dosage form. In this work, a new isocratic chromatographic method is developed. The newly developed method is applicable for assay determination of the active pharmaceutical ingredient. The chromatographic separation is achieved on a Waters Acquity BEH column (100 mm, i.d., 2.1 mm, 1.7 μm) within a short runtime of 2 min using a mobile phase of 5 mM ammonium acetate-acetonitrile (25:75, v/v), at a flow rate of 0.3 mL/min at an ambient temperature. Quantification is achieved with photodiode array detection at 230 nm, over the concentration range of 0.05-26 μg/mL. Forced degradation studies are also performed for nabumetone bulk drug samples to demonstrate the stability-indicating power of the UPLC method. Comparison of system performance with conventional high-performance liquid chromatography is made with respect to analysis time, efficiency, and sensitivity. The method is validated according to the ICH guidelines and is applied successfully for the determination of nabumetone in tablets.     

MODEL SIMULATION OF WATER-IN-OIL XANTHAN FERMENTATION

The W/O xanthan fermentation is simulated by integrating the microbial kinetic behaviors and the multiple-phase process characteristics. Model 1 assumes uniform redistribution of cells, substrates and product by frequent droplet breakup and coalescence. Model 2 simulates the system of viscous aqueous phase with minimal droplet breakup and component redistribution. The real fermentation should proceed within the bounds set by the two models. Effects of various parameters are evaluated. The aqueous-phase xanthan concentration (X_n) and volumetric productivity (Q_P) achieved at 200 h are used as the indicators. X_n and Q_P increase with nitrogen-source concentration (S_NO) initially but plateau (Model 1) or decrease slightly (Model 2) at high S_NO. X_n (at 200 h) decreases with increasing aqueous-phase volume fraction (f). Q_P, however, increases with f reflecting its basing on the total dispersion volume. Increasing agitation and aeration result in higher X_n and Q_P. The higher agitation enhances the G/O interfacial oxygen transfer and reduces the droplet size. Increasing aeration improves the G/O interfacial transfer but increases the droplet size. Its net positive effect implies a rate-limiting step at G/O interface. The W/O fermentation can produce far higher X_n (> 200 kg/m3) and Q_P( > 0.8 kg/m3-h) than the conventional fermentation (X_n ～ 50 kg/m3, Q_P ～ 0.5 kg/m3-h).     

Microstructural and mechanical analysis of Cu and Au interconnect on various bond pads

Effects of High Temperature Storage (HTS) and bonding toward microstructure change of intermetallic compound (IMC) at the wire bonding interface of 3 types of bond pad (Al, AlSiCu and NiPdAu) were presented in this paper. Optical and electron microscope analyses revealed that the IMC growth rate of samples under 175 and 200 °C HTS increased in the order of Al > AlSiCu > NiPdAu. Besides, higher HTS and bonding temperatures also promoted higher IMC thickness. The compositional study showed that higher HTS and bonding temperature developed rapid interdiffusion in bonding interface. In the mechanical ball shear test, a decrease of the shear force of Al and AlSiCu bond pads after 500 h HTS was believed due to poorly developed IMC at bonding interface. On the other hand, shear force degradation at 1000 h was due to excessive growth of IMC that in turn causes the formation of defects. For NiPdAu bond pad, increasing trend of shear force with HTS duration at 175 °C implied a good reliability of the Cu wire bonding. The rapid microscopic inspection on Cu wired Al bond pad under HTS 175 °C showed the IMC development from the periphery to the center of the ball bond. However, after 500 h voids started to develop until the crack was observed at 1000 h.     

Molecular forces and elastic constants of polyethylene single crystals

Polyethylene has an orthorhombic lattice for which nine elastic constants exist; they are obtained in terms of the intra- and intermolecular forces. Constants involved in the 6-12 Lennard-Jones potential approximating the London dispersion type of van der Waals' forces are obtained by computing the crystal potential energy and comparing it with the cohesive energy. First and second nearest-neighbor interactions are considered to establish relationship between the elastic constants and the interaction constants. The latter are obtained in terms of the C—C bond, stretching, bending, and repulsive force constants and the L-J potential constants. A limited type of central force assumption is applied. Values of Young and shear moduli are obtained along the three axes. The value along the chain compares with the experimentally determined and calculated values for oriented polyethylene. Young's modulus along the lateral direction is of the order of Young's modulus of bulk polyethylene, showing that intermo-lecular forces are the ones that determine the Young modulus of bulk polyethylene.