Effect of gravity on subject-specific human lung deformation

A biomechanical model of human lung is developed and used to investigate the effect of gravity on lung deformation. The lung is assumed to behave as a poro-elastic medium with spatially dependent elastic property. Finite element analysis is performed on a three-dimensional (3D) lung geometry reconstructed from a four-dimensional Computed Tomography (4DCT) scan dataset of human patient. The spatially dependent Young’s modulus (YM) values are estimated using inverse analysis from a linear elastic deformation model. The predicted deformation of selected landmarks is monitored with and without gravity, and compared with data obtained from 4DCT registration. The results show that gravity indeed significantly affects the magnitude and distribution of lung deformation with the maximum displacement enhanced by 54% in the direction of gravity, for the conditions investigated. In summary, the accuracy of predicted deformation is improved through incorporation of gravity in the biomechanical model of lung.     

Intensification of oxidation capacity using chloroalkanes as additives in hydrodynamic and acoustic cavitation reactors

The effect of the presence and absence of the chloroalkanes, dichloromethane (CH(2)Cl(2)), chloroform (CHCl(3)) and carbon tetrachloride (CCl(4)) on the extent of oxidation of aqueous I(-) to I(3)(-) has been investigated in (a) a liquid whistle reactor (LWR) generating hydrodynamic cavitation and (b) an ultrasonic probe, which produces acoustic cavitation. The aim has been to examine the intensification achieved in the extent of oxidation due to the generation of additional free radicals/oxidants in the reactor as a result of the presence of chloroalkanes. It has been observed that the extent of increase in the oxidation reaction is strongly dependent on the applied pressure in the case of the LWR. Also, higher volumes of the chloroalkanes favour the intensification and the order of effectiveness is CCl(4)>CHCl(3)>CH(2)Cl(2). However, the results with the ultrasonic probe suggest that an optimum concentration of CH(2)Cl(2) or CHCl(3) exists beyond which there is little increase in the extent of observed intensification. For CCl(4), however, no such optimum concentration was observed and the extent of increase in the rates of oxidation reaction rose with the amount of CCl(4) added. Stage wise addition of the chloroalkanes was found to give marginally better results in the case of the ultrasonic probe as compared to bulk addition at the start of the run. Although CCl(4) is the most effective, its toxicity and carcinogenicity may mean that CH(2)Cl(2) and CHCl(3) offer a safer viable alternative and the present work should be useful in establishing the amount of chloroalkanes required for obtaining a suitable degree of intensification.     

Rotating Detonation Combustor Research at the University of Cincinnati

Rotating detonation combustors (RDC) are at the forefront of pressure gain combustion (PGC) research. The simplicity in design and the ease of assembly makes it a promising technology that could be integrated into existing combustor architectures. This is, however, coupled with the considerable complexities of the detonation-based flow field, and the associated modes and coupling mechanisms. The current paper is an overview of the research done at the University of Cincinnati to address some of the challenges and questions pertaining to the physics of RDC operation. Issues such as combustor geometry, injection schemes and mixing, varied reactants behavior and modes of RDC operation are discussed. The effects of pressurization of the combustor, along with other detonation enhancement strategies are also deliberated upon. When appropriate, parallels are drawn to the phenomena of high frequency combustion instabilities to address the similarities in observations between the two fields.     

Radiochemical studies using 59Fe and 35S provide evidence for iron-regulated uptake of sulfur in wheat

Ecological half-lives of radiocesium were observed on Izu-Oshima Island, Japan, a place which experiences typhoons annually. The estimated ecological half-lives (uncertainty) based on the observations above an asphalt and a bare surface were 1.6 year (31.6%) and 1.9 year (14.4%), respectively; those of ¹³⁴Cs and ¹³⁷Cs in soil were 1.5 year (7.2%) and 4.0 year (5.9%), respectively. The radiation level was quickly returned to the original level compared to other locations that do not experience such typhoon activity.

     

Investigation and optimization of the recovery of coal fines using oil agglomeration process: Use of waste oils from different sectors

The high cost of the bridging liquid subdues the implementation and commercialization of oil agglomeration process. To overcome this problem, waste oils from different sectors were used in this present study. The performance of the process was assessed based on the responses like ash rejection and organic matter recovery. The aim of the present study was to investigate the usage of waste oils from different sectors and to optimize and analyze the behavioral pattern showcased by different variables (pulp density, oil dosage, agglomeration time and oil type) using response surface methodology (Box-Behnken design). Experimental investigation shows that the optimum pulp density, oil dosage, agglomeration time and oil type condition obtained as 3%, 15%, 15?min and waste engine oil, respectively. At optimum condition, the % ash rejection and % organic matter recovery obtained as 63.94% and 81.8%, respectively.     

A Self‐Digitization Dielectrophoretic (SD‐DEP) Chip for High‐Efficiency Single‐Cell Capture,On‐Demand Compartmentalization,and Downstream Nucleic Acid Analysis

The design and fabrication of a self‐digitization dielectrophoretic (SD‐DEP) chip with simple components for single‐cell manipulation and downstream nucleic acid analysis is presented. The device employed the traditional DEP and insulator DEP to create the local electric field that is tailored to approximately the size of single cells, enabling highly efficient single‐cell capture. The multistep procedures of cell manipulation, compartmentalization, lysis, and analysis were performed in the integrated microdevice, consuming minimal reagents, minimizing contamination, decreasing lysate dilution, and increasing assay sensitivity. The platform developed here could be a promising and powerful tool in single‐cell research for precise medicine.     

Effect of a premelted film on the dynamics of particle–solidification front interactions

Numerical simulations are performed to study the interaction of a solidification front with an embedded particle. A sharp-interface method is used to track both the phase boundary and the particle. The solidification front dynamics is fully coupled with particle motion. The main objective of the paper is to distinguish the role played by the premelted layer between the solidification front and the particle in determining conditions for particle engulfment. Results are obtained by assuming a premelted layer exists in the gap between the particle and the solidification front and compared to those assuming no premelted layer. In the absence of a premelted layer, arbitrary cut-off values for particle-front gap thickness need to be invoked in order to define the critical velocity for which the pushing–engulfment transition occurs. When a premelted layer is assumed to exist, the prediction of the critical velocity is determined solely from the dynamics of the coupled front–particle interaction. In addition, model predictions for the critical velocity based on a steady-state heat transfer analysis are shown to differ from that when the full dynamics of the phase boundary are taken into account.     

pi-Conjugated macrocycles from thiophenes and benzenes

pi-Conjugated macrocycles consisting of thiophenes and benzenes exhibit benzenoid features for 4npi macrocycles, whereas (4n + 2)pi macrocycles are annulenoid due to rapid interconversion between quinoid and Kekule canonical forms in the benzene units.     

Synergy between Brønsted acid sites and Lewis acid sites

Synergy between Br?nsted acid sites and Lewis acid sites in mesoporous Al-Zr-TUD-1 was demonstrated to exist in Br?nsted acid catalysed reactions, but not in Lewis acid catalysed reactions.     

Effect of swift heavy ions in Ni-Al nanocrystalline films studied by X-ray absorption spectroscopy

X-ray absorption spectroscopic measurements have been used to compare the electronic structures of swift heavy ions (100 MeV Si ions) irradiated and pristine Ni-Al nanocrystalline films. Results from X-ray diffraction (XRD), X-ray absorption near-edge structure (XANES) spectra at Al K-, and Ni L(2,3)-edges and extended X-ray absorption fine structure (EXAFS) at Ni K-edges are discussed. The observed XRD peaks indicate the improvement of crystalline nature and Al(111) clustering after the swift heavy ion interactions. While the XANES spectra at Ni L(2,3)-edges show decrease in the intensity of white line strength, the Al K-edge shows increase in intensity after irradiation. Above results imply that swift heavy ions induce low Z (i.e., Al) ion mass transport, changes in Al sp-Ni-d hybridization, and charge transfer. EXAFS results show that crystalline nature is improved after swift heavy irradiation which is consistent with XRD results.