Investigation and optimization of the recovery of coal fines using oil agglomeration process: Use of waste oils from different sectors

The high cost of the bridging liquid subdues the implementation and commercialization of oil agglomeration process. To overcome this problem, waste oils from different sectors were used in this present study. The performance of the process was assessed based on the responses like ash rejection and organic matter recovery. The aim of the present study was to investigate the usage of waste oils from different sectors and to optimize and analyze the behavioral pattern showcased by different variables (pulp density, oil dosage, agglomeration time and oil type) using response surface methodology (Box-Behnken design). Experimental investigation shows that the optimum pulp density, oil dosage, agglomeration time and oil type condition obtained as 3%, 15%, 15?min and waste engine oil, respectively. At optimum condition, the % ash rejection and % organic matter recovery obtained as 63.94% and 81.8%, respectively.     

Synergy between Brønsted acid sites and Lewis acid sites

Synergy between Br?nsted acid sites and Lewis acid sites in mesoporous Al-Zr-TUD-1 was demonstrated to exist in Br?nsted acid catalysed reactions, but not in Lewis acid catalysed reactions.     

pi-Conjugated macrocycles from thiophenes and benzenes

pi-Conjugated macrocycles consisting of thiophenes and benzenes exhibit benzenoid features for 4npi macrocycles, whereas (4n + 2)pi macrocycles are annulenoid due to rapid interconversion between quinoid and Kekule canonical forms in the benzene units.     

A diruthenium-substituted polyoxometalate as an electrocatalyst for oxygen generation

Transition metal heteropolyanions have been used to catalyze a variety of organic oxidations but have not previously been used for O2 generation, despite sharing some structural similarities with dioxoruthenium water-oxidation catalysts. In this study, we report that the di-Ru-substituted polyoxometalate (POM) [Ru2Zn2(H2O)2(ZnW9O34)2]14- can be used to catalyze the electrochemical generation of O2. By comparing the behavior of this compound to that observed using a mono-Ru-substituted POM catalyst, we show that adjacent Ru sites are necessary to observe O2 generation. These observations suggest a reaction pathway involving two Ru-bound oxygen species combining to form O2 and are consistent with the accepted mechanism of electrochemical oxygen evolution. Finally, analysis of the observed electrode kinetics yields a Tafel slope of roughly 120 mV, which is similar to values reported previously for perovskite anodes.     

NMR determination of smectic ordering of probe molecules

The NMR spectra of the three solutes ortho-, meta-, and para-dichlorobenzene in the nematic and smectic A phases of the liquid crystals 8CB and 8OCB are analyzed to yield two orientational order parameters for each solute. Extrapolation of the asymmetry in the energy parameters that describe the orientational ordering in the nematic phase are used to provide estimates of the strength of the nematic potential in the smectic A phase. The experimentally determined asymmetry of the orientational order parameters in the smectic A phase is then used in conjunction with Kobayashi-McMillan theory applied to solutes to give information about the smectic A layering and the nematic/smectic A coupling. In both smectic A solvents, the solute smectic coupling constant, tau, is negative (with the origin fixed at the center of the smectic layer) for all solutes. The signs and relative values of tau indicate that the ortho and para solutes favor the interlayer region while the meta solute is more evenly distributed throughout the layers.     

Effect of Cold Atmospheric Plasma Jet and Gamma Radiation Treatments on Gingivobuccal Squamous Cell Carcinoma and Breast Adenocarcinoma Cells

Surgery, chemotherapy and radiotherapy, the conventional treatment modalities of cancer though successful are limited by presence of residual tumor cells, toxic side-effects and treatment resistance, thus raising the need for investigating other novel approaches. Here, we have used a cold atmospheric plasma (CAP) jet and assessed the in vitro efficacy in gingivobuccal squamous cell carcinoma (GB-SCC) – ITOC-03, breast adenocarcinoma—MCF7 and HEK293 cells. Cells lines were subjected to varying doses of ionizing radiation (0, 2, 4, 6, 8 Gy) and CAP jet treatment (0, 60, 180, 240, 300 s). CAP jet treatment showed time dependent increase in H₂O₂ and NO₂^? concentration. Cell viability assay showed potent effect of CAP jet on all three cell lines in comparison to radiation treatment, while helium gas treatment showed minimal inhibitory effect. Irradiated, CAP jet and helium gas treated cells showed loss of nucleic acid features, 788 cm^?1 and 1340 cm^?1 in Raman spectra, indicating DNA damage. Principal Component Analysis (PCA) showed distinct classification of CAP-treated and control cells, while Principal Component – Linear Discriminant Analysis (PC-LDA) based classification of Raman spectra showed ITOC-03 and HEK293 cells to be sensitive to CAP jet and radiation treatment in comparison to MCF7 cells. Collectively, cell viability assay and Raman spectroscopy have shown potent effect of CAP jet in GB-SCC and breast adenocarcinoma cells.

     

Structural characterization of a lanthanum bistriflimide complex, La(N(SO2CF3)2)3(H2O)3, and an investigation of La, Sm, and Eu electrochemistry in a room-temperature ionic liquid, [Me3N(n)Bu][N(SO2CF3)2

The reduction of selected lanthanide cations to the zerovalent state in the room-temperature ionic liquid [Me3N(n)Bu][TFSI] is reported (where TFSI = bistriflimide, [N(SO2CF3)2]-). The lanthanide cations were introduced to the melt as the TFSI hydrate complexes [Ln(TFSI)3(H2O)3] (where Ln = La(III), Sm(III) or Eu(III)). The lanthanum compound [La(TFSI)3(H2O)3] has been crystallographically characterized, revealing the first structurally characterized f-element TFSI complex. The lanthanide in all three complexes was shown to be reducible to the metallic state in [Me3N(n)Bu][TFSI]. For both the Eu and Sm complexes, reduction to the metallic state was achieved via divalent species, and there was an additional observation of the electrodeposition of Eu metal.     

Photoinduced electron transfer between a donor and an acceptor separated by a capsular wall

The efficient photoinduced electron transfer from a stilbene derivative incarcerated within a negatively charged organic nanocapsule to positively charged acceptors (methyl viologen and a pyridinium salt) adsorbed outside and the back electron transfer were controlled by supramolecular effects.     

Stable and tunable phosphorescent neutral cyclometalated Au(III) diaryl complexes

A series of novel luminescent cyclometalated Au(III) neutral complexes of the type cis-[(N(∧)C)AuL] [N(∧)C = 2-phenylpyridine (ppy), L = 1,1'-biphenyl (1)] and cis-[(N(∧)C)AuL(2)] [N(∧)C = 2-phenylpyridine (ppy), L = C(6)H(5) (2), C(6)F(5) (3), C(6)H(4)-CF(3)-p (4), 2-C(4)H(3)S (5)]; [N(∧)C = 2-(2-thienyl)pyridine (thpy), L = C(6)H(5) (6), C(6)F(5) (7)]; [N(∧)C = 2-(5-methyl-2-thienyl)pyridine (5 m-thpy), L = C(6)F(5) (8)] were successfully synthesized. The X-ray crystal structures of all compounds except 3 have been determined. These complexes were found to show long-lived emission in solution at room temperature. The emission origins of the complexes have been tentatively assigned to be derived from triplet states predominantly bearing intraligand (IL) character with some perturbation from the metal center. Density functional theory (DFT) calculations were performed to evaluate the stability associated with the complexes and TD-DFT calculations to ascertain the nature of the excited state. Variation of the cyclometalated ligands in the complexes readily leads to the tuning of the nature of the lower energy emissive states.     

Microstructural and mechanical analysis of Cu and Au interconnect on various bond pads

Effects of High Temperature Storage (HTS) and bonding toward microstructure change of intermetallic compound (IMC) at the wire bonding interface of 3 types of bond pad (Al, AlSiCu and NiPdAu) were presented in this paper. Optical and electron microscope analyses revealed that the IMC growth rate of samples under 175 and 200 °C HTS increased in the order of Al > AlSiCu > NiPdAu. Besides, higher HTS and bonding temperatures also promoted higher IMC thickness. The compositional study showed that higher HTS and bonding temperature developed rapid interdiffusion in bonding interface. In the mechanical ball shear test, a decrease of the shear force of Al and AlSiCu bond pads after 500 h HTS was believed due to poorly developed IMC at bonding interface. On the other hand, shear force degradation at 1000 h was due to excessive growth of IMC that in turn causes the formation of defects. For NiPdAu bond pad, increasing trend of shear force with HTS duration at 175 °C implied a good reliability of the Cu wire bonding. The rapid microscopic inspection on Cu wired Al bond pad under HTS 175 °C showed the IMC development from the periphery to the center of the ball bond. However, after 500 h voids started to develop until the crack was observed at 1000 h.