Continuous fermentation of d-xylose by immobilizedpichia stipitis comparison between cstr and cpfr

Applied Biochemistry and Biotechnology - The main purpose of this work was to compare the performance of two different kinds of reactors (CSTR and CPFR) in order to enhance the ethanol productivity...     

Sample preparation procedure for the determination of sulphur and trace metals in oil products by the ICP with a minitorch using emulsions

A quick sample preparation method was used for the determination of sulphur and trace metals in oil and oily products by the ICP with a minitorch. Stable aqueous emulsions of oils and oil products were made by using two kinds of emulsifiers (one with low sulphur content, the other sulfonated). Aqueous standard solutions can be used for the preparation of calibration solutions. The contents of S, Al, Cr, Cu, Fe, Mg, Ni and Pb in aqueous emulsions were determined and the results were in good agreement with the composition of oil standard solutions used for control analysis procedure.     

New access to H-phosphonates via metal-catalyzed phosphorus-oxygen bond formation

A novel approach to H-phosphonates from hypophosphorous acid using a transfer hydrogenation process was developed. This method is atom-economical, environmentally friendly, catalytic, and efficient, leading easily to H-phosphonate monoesters or ammonium salt in moderate to good yields.     

Access to Paullone Analogues by Intramolecular Heck Reaction

The syntheses of paullone ( 1a ) and three paullone derivatives, including a sulfur analogue ( 2a ), a tricyclic derivative ( 2b ), and a ring‐enlarged variant ( 2c ), are described, Pd‐catalyzed intramolecular Heck reaction being the key step. The kinase‐inhibitory properties of the novel paullone analogues were investigated.     

Ab initio potential energy surface and pressure broadening coefficients for the He-CH3F complex

Symmetry-adapted perturbation theory has been applied to compute the He-CH₃F potential with the CH₃F molecule assumed rigid. The potential has a global minimum of −48.9 cm⁻¹ at the center of mass separation of 7.2 bohr with the helium atom lying along the C-F bond on the hydrogen’s side. The computed points were fitted to an analytic energy surface with a correct asymptotic behaviour. This potential has been used to compute the pressure broadening (PB) coefficients for the (j, k) = (0, 0) → (1, 0) and (1, 0) → (2, 0) rotational transitions of CH₃F perturbed by helium for a wide range of temperatures. Close-coupling results are compared with the experimental data of Willey et al. [J. Chem. Phys. 97 (1992) 4723], Beaky et al. [J. Mol. Struct. 352/353 (1995) 245] and infinite order sudden results are compared with those of Grigoriev et al. [J. Mol. Struct. 186 (1997) 48] for the ν₆ band of CH₃F perturbed by helium at room temperature. To our knowledge, present work is the first attempt of making fully ab initio calculations of collisional cross-sections and pressure broadening coefficients for this simple symmetric top system at low and room temperature.     

The Random Average Process and Random Walk in a Space-Time Random Environment in One Dimension

We study space-time fluctuations around a characteristic line for a one-dimensional interacting system known as the random average process. The state of this system is a real-valued function on the integers. New values of the function are created by averaging previous values with random weights. The fluctuations analyzed occur on the scale n ^1/4, where n is the ratio of macroscopic and microscopic scales in the system. The limits of the fluctuations are described by a family of Gaussian processes. In cases of known product-form invariant distributions, this limit is a two-parameter process whose time marginals are fractional Brownian motions with Hurst parameter 1/4. Along the way we study the limits of quenched mean processes for a random walk in a space-time random environment. These limits also happen at scale n ^1/4 and are described by certain Gaussian processes that we identify. In particular, when we look at a backward quenched mean process, the limit process is the solution of a stochastic heat equation.     

Lightly crosslinked,mesomorphic networks obtained through the reaction of dimeric,liquid‐crystalline epoxy–imine monomers and heptanedioic acid

We reacted various dimeric, liquid‐crystalline epoxy–imine monomers, differing in the length of the central aliphatic spacer or the dipolar moments, with heptanedioic acid. The resulting systems showed a liquid‐crystalline phase in some cases, depending on the dimer and on the reaction conditions. The systems were characterized with respect to their mesomorphic properties and then were submitted to dynamic mechanical thermal analysis in both fixed‐frequency and frequency‐sweep modes in the shear sandwich configuration. The arrangement in the liquid‐crystalline phase seemed to be mainly affected both by the polarization of the mesogen and by the reaction temperature, which favored the liquid‐crystalline arrangement when it was lying in the range of stability of the dimer mesophase. In agreement with other recent literature data, dynamic mechanical thermal analysis results suggested that the presence of the mesogen directly incorporated into the main chain increased the lifetimes of the elastic modes both in the isotropic phase and in the liquid‐crystalline phase with respect to side‐chain liquid‐crystalline elastomers and that the time–temperature superposition principle did not hold through the liquid‐crystalline‐to‐isotropic transition. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44:6270–6286, 2006     

Vinyl‐terminated side‐chain liquid‐crystalline polyethers containing mesogenic benzylideneaniline moieties

The synthesis of two vinyl‐terminated side‐chain liquid‐crystalline polyethers containing benzylideneaniline moieties as mesogenic cores was approached in two different ways: by chemically modifying poly(epichlorohydrin) with suitable mesogenic acids or by polymerizing analogous glycidyl ester or glycidyl ether derivatives. In all the conditions tested, the first approach led to materials in which the imine group was hydrolyzed. The second approach led to the desired polymers PG2a and PG2b , but only from the glycidyl ether derivatives and when the initiator was the system that combined polyiminophosphazene base t‐Bu‐P₄ and 3,5‐di‐t‐butylphenol. These polymers were chemically characterized by IR and ¹H and ¹³C NMR spectroscopies. The estimated degrees of polymerization ranged from 30 to 36. The liquid crystalline behavior of the synthesized polymers was studied by differential scanning calorimetry, polarized optical microscopy (POM) and X‐ray diffraction. Both polymers behave like liquid crystals and exhibited a single mesophase, which was recognized as a smectic C mesophase, probably with a bilayer arrangement, i.e., a smectic C₂ mesophase. The crosslinking of both polymers was performed with dicumyl peroxide as initiator, which led to liquid crystalline thermosets. POM and X‐ray diffraction confirmed that the mesophase organization mantained on the crosslinked materials. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1877–1889, 2006     

Synthesis of poly(vinyl chloride)‐b‐poly(n‐butyl acrylate)‐b‐poly(vinyl chloride) by the competitive single‐electron‐transfer/degenerative‐chain‐transfer‐mediated living radical polymerization in water

The synthesis of a block copolymer poly(vinyl chloride)‐b‐poly(n‐butyl acrylate)‐b‐poly(vinyl chloride) is reported. This new material was synthesized by single‐electron‐transfer/degenerative‐chain‐transfer‐mediated living radical polymerization (SET‐DTLRP) in two steps. First, a bifunctional macroinitiator of α,ω‐di(iodo)poly (butyl acrylate) [α,ω‐di(iodo)PBA] was synthesized by SET‐DTLRP in water at 25 °C. The macroinitiator was further reinitiated by SET‐DTLRP, leading to the formation of the desired product. This ABA block copolymer was synthesized with high initiator efficiency. The kinetics of the copolymerization reaction was studied for two PBA macroinitiators with number–average molecular weight of 10 k and 20 k. The relationship between the conversion and the number–average molecular weight was found to be linear. The dynamic mechanical thermal analysis suggests just one phase, indicating that copolymer behaves as a single material with no phase separation. This methodology provides the access to several block copolymers and other complex architectures that result from combinations of thermoplastics (PVC) and elastomers (PBA). From industrial standpoint, this process is attractive, because of easy experimental setup and the environmental friendly reaction medium. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3001–3008, 2006