Monoterpenoids—V: (+)-Carvone from (+)-car-3-ene

A stereoselective conversion of the readily available (+)-car-3-ene into (+)-carvone by two different routes is described. This is the first report on synthesis of carvone from car-3-ene.     

Stability-Indicating HPLC Method for the Determination of Metadoxine as Bulk Drug and in Pharmaceutical Dosage Form

A sensitive and reproducible method is described for the quantitative determination of metadoxine in the presence of its degradation products. The method was based on high performance liquid chromatographic separation of the drug from its degradation products on the reversed phase, kromasil column [C₁₈ (5-micron, 25 cm × 4.6 mm, i.d.)] at ambient temperature using a mobile phase consisting of methanol and water (50: 50, v/v). Flow rate was 1.0 mL min^?1 with an average operating pressure of 180 kg cm^?2 and t _R was found to be 2.85 ± 0.05 min. Quantitation was achieved with UV detection at 286 nm based on peak area with linear calibration curves at concentration range 10–100 μg mL^?1. This method has been successively applied to pharmaceutical formulation. No chromatographic interference from the tablet excipients was found. The method was validated in terms of precision, robustness, recovery and limits of detection and quantitation. Drug was subjected to acid, alkali and neutral hydrolysis, oxidation, dry heat, wet heat treatment and photo and UV degradation. As the proposed method could effectively separate the drug from its degradation products, it can be employed as stability indicating one. Moreover, the proposed HPLC method was utilized to investigate the kinetics of the acidic, alkaline and oxidative degradation processes at different temperatures and their respective apparent pseudo first order rare constant, half-life and activation energy was calculated with the help of Arrhenius plot. In addition the pH-rate profile of degradation of metadoxine in constant ionic strength buffer solutions with in the pH range 2–11 was studied.     

Effects of structural imperfections on the dynamic mechanical response of main-chain smectic elastomers

We examine the influence of structural imperfections on mechanical damping in polydomain smectic main-chain liquid crystalline elastomers (MCLCE) subjected to small strain oscillatory shear. The mechanical loss factor tan δ = G″(ω)/G′(ω) exhibits a strong maximum (tan δ ≈ 1.0) near the smectic-isotropic (clearing) transition. “Optimal” elastomers that exhibit minimal equilibrium swelling in a good solvent are compared with highly swelling “imperfect elastomers” that contain higher concentrations of structural imperfections such as pendant chains. For the imperfect elastomers, tan δ is markedly enhanced in the isotropic state because of relaxation of pendant chains and other imperfections. However, within the smectic state, the magnitude of tan δ and its temperature dependence are similar for optimal and imperfect elastomers at ω = 1 Hz. The prominent loss peak near the clearing transition arises from segment-level relaxations that are insensitive to the details of chain connectivity. Smectic MCLCE can be tailored for applications as vibration-damping materials by manipulating the clearing transition temperature through the backbone structure or by deliberate introduction of structural imperfections such as pendant chains. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3267–3276, 2007     

Preparation of cobalt doped γ-Fe2O3 and Mn-Zn ferrites by the thermal decomposition of the hydrazine precursors

Fine particle cobalt doped-Fe₂O₃ and Mn-Zn ferrites have been prepared by the thermal decomposition of N₂H₅Co _x Fe_1–x (N₂H₃COO)₃.H₂O wherex=1–10 atom% and (N₂H₅)₃Mn_xZn_1–x Fe₂(N₂H₃COO)₉· 3H₂O wherex=0.2–0.8, respectively. Formation of these oxide materials has been confirmed by thermogravimetry and X-ray powder diffraction patterns. The fine particle nature of these oxide materials is evident from particle size analysis and surface area measurements.

---

Zusammenfassung Mit fein verteiltem Kobalt versetztes-Fe₂O₃ sowie Mn-Zn Ferrite wurden durch thermische Zersetzung von N₂H₅Co _x Fe_1–x (N₂H₃COO)₃·H₂O mit jc=1–10 Atomprozent bzw. (N₂H₅)₃Mn _x Zn_1–x Fe₂(N₂H₃COO)₉·3H₂O mitx=0,2–0,8 hergestellt. Die Bildung dieser Oxidstoffe wurde durch Thermogravimetrie und Pulverdiffraktionsmethoden bekräftigt. Die Feinkornstruktur dieser Oxidstoffe wird durch Korngrößenverteilungs- und Oberflächenmessungen augenscheinlich.

---

N₂H₅Co _x Fe_1–x (N₂H₃COO)₃·H₂O, x-1–10 %, (N₂H₅)₃Mn _x Zn_1–x Fe₂(N₂H₃COO)₉ · 3H₂O, x=0,2–0,8, , , -Fe₂O₃ Mn-Zn . . .

     

Tracer-diffusion of Zn2+ ions in cobalt sulphate

Tracer-diffusion of Zn²⁺ ions in the presence of CoSO₄ is studied at 25°C in 1% agar gel over a concentration range of 10^–5 to 0.25M using a zone-diffusion technique. The deviations observed between experimental and theoretical values of diffusion coefficients are explained by considering different types of interactions occurring in the ion-gel-water system. Further, study of the obstruction, effect in the diffusion of Zn²⁺ ions at different concentrations of CoSO₄ reveals that the -value decreases with increasing concentration of the electrolyte. This observation is accounted on the basis of competitive hydration between ions and agar molecules.     

Net information measures for modified Yukawa and Hulthén potentials

The dimensional analyses of the position and momentum variances‐based quantum mechanical Heisenberg uncertainty measure, as well as the entropic information measures given by the Shannon information entropy sum and the product of Fisher information measures are carried out for two widely used nonrelativistic isotropic exponential‐cosine screened Coulomb potentials generated by multiplying the superpositions of (i) Yukawa‐like, ?Z(e^?μr/r), and (ii) Hulthén‐like, ?Zμ(1/(e^μr ? 1)), potentials by cos(bμr) followed by addition of the term a/r², where a and b ≥ 0, μ are the screening parameters and Z, in case of atoms, denotes the nuclear charge. Under the spherical symmetry, all the information measures considered are shown to be independent of the scaling of the set [μ, Z] at a fixed value of μ/Z, a, and b and the other parameters defining the superpositions of the potentials. Numerical results are presented, which support the validity of the scaling properties. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Extraction of actinides by quaternary amines from hydrochloric acid medium

The extraction of Np(IV), Pu(IV) and U(VI) from aqueous hydrochloric acid into quaternary amines has been studied. The dependence of the distribution coefficient on amine concentration suggests that the actinide ions extracted are NpCl ₆ ²⁻ PuCl ₆ ²⁻ and UO₂Cl ₄ ²⁻ . This is further supported by the absorption spectra of the amine extracts of these actinide ions. Based on the extraction data obtained, a simple method for the separation of typical metal ions such as Cs, lanthanides and Zr from U(VI) and Pu(IV) is suggested.     

Extraction study of uranium(VI) and thorium(IV) salicylates with triphenylarsine oxide

Triphenylarsine oxide is proposed as an extractant for the solvent extraction of uranium and thorium salicylates. The optimum extraction conditions are established by studying the various parameters such as pH, sodium salicylate concentration, triphenylarsine oxide concentration, diluents and shaking time. The probable extracted species as ascertained by logD-logC plots are UO₂(Hsal)₂·2TPAsO and Th(Hsal)₄·2TPAsO. The method is simple, fast, precise and permits the determination of uranium and thorium in monazite sand samples.     

Anti-Inflammatory,Antidiabetic Properties and In Silico Modeling of Cucurbitane-Type Triterpene Glycosides from Fruits of an Indian Cultivar of Momordica charantia L.

Diabetes mellitus is a chronic disease and one of the fastest-growing health challenges of the last decades. Studies have shown that chronic low-grade inflammation and activation of the innate immune system are intimately involved in type 2 diabetes pathogenesis. Momordica charantia L. fruits are used in traditional medicine to manage diabetes. Herein, we report the purification of a new 23-O-β-d-allopyranosyl-5β,19-epoxycucurbitane-6,24-diene triterpene (charantoside XV, 6) along with 25ξ-isopropenylchole-5(6)-ene-3-O-β-d-glucopyranoside (1), karaviloside VI (2), karaviloside VIII (3), momordicoside L (4), momordicoside A (5) and kuguaglycoside C (7) from an Indian cultivar of Momordica charantia. At 50 µM compounds, 2–6 differentially affected the expression of pro-inflammatory markers IL-6, TNF-α, and iNOS, and mitochondrial marker COX-2. Compounds tested for the inhibition of α-amylase and α-glucosidase enzymes at 0.87 mM and 1.33 mM, respectively. Compounds showed similar α-amylase inhibitory activity than acarbose (0.13 mM) of control (68.0–76.6%). Karaviloside VIII (56.5%) was the most active compound in the α-glucosidase assay, followed by karaviloside VI (40.3%), while momordicoside L (23.7%), A (33.5%), and charantoside XV (23.9%) were the least active compounds. To better understand the mode of binding of cucurbitane-triterpenes to these enzymes, in silico docking of the isolated compounds was evaluated with α-amylase and α-glucosidase.     

Improved Mucoadhesion,Permeation and In Vitro Anticancer Potential of Synthesized Thiolated Acacia and Karaya Gum Combination: A Systematic Study

Thiolation of polymers is one of the most appropriate approaches to impart higher mechanical strength and mucoadhesion. Thiol modification of gum karaya and gum acacia was carried out by esterification with 80% thioglycolic acid. FTIR, DSC and XRD confirmed the completion of thiolation reaction. Anticancer potential of developed thiomer was studied on cervical cancer cell lines (HeLa) and more than 60% of human cervical cell lines (HeLa) were inhibited at concentration of 5 µg/100 µL. Immobilized thiol groups were found to be 0.8511 mmol/g as determined by Ellman’s method. Cytotoxicity studies on L929 fibroblast cell lines indicated thiomers were biocompatible. Bilayered tablets were prepared using Ivabradine hydrochloride as the model drug and synthesized thiolated gums as mucoadhesive polymer. Tablets prepared using thiolated polymers in combination showed more swelling, mucoadhesion and residence time as compared to unmodified gums. Thiol modification controlled the release of the drug for 24 h and enhanced permeation of the drug up to 3 fold through porcine buccal mucosa as compared to tablets with unmodified gums. Thiolated polymer showed increased mucoadhesion and permeation, anticancer potential, controlled release and thus can be utilized as a novel excipient in formulation development.