Investigations of low- and high-spin states of <Superscript>132</Superscript>La

The fusion evaporation reaction ¹²²Sn(¹⁴N, 4n)¹³²La was used to populate the high-spin states of ¹³²La at the beam energy of 60 MeV. A new band consisting of mostly E2 transitions has been discovered. This band has the interesting links to the ground state 2^- and the isomeric state 6^-. A new transition of energy 351 keV connecting the low-spin states of the positive-parity band based on the πh _11/2 ⊗ νh _11/2 particle configuration, has been found. This has played a very important role in resolving the existing ambiguities and inconsistencies in the spin assignment of the band head. Received: 12 August 2002 / Accepted: 18 March 2003 / Published online: 7 May 2003     

The role of oxygen and hydrogen partial pressures on structural and optical properties of ITO films deposited by reactive rf-magnetron sputtering

Sn doped In₂O₃ films are deposited by rf-magnetron sputtering at 300 °C under Ar, Ar + O₂ and Ar + H₂ gas ambients. For the film prepared under argon ambient, electrical resistivity 6.5 × 10⁻⁴ Ω cm and 95% optical transmission in the visible region have been achieved optimizing the power and chamber pressure during the film deposition. X-ray diffraction spectra of the ITO film reveal (2 2 2) and (4 0 0) crystallographic planes of In₂O₃. With the introduction of 1.33% oxygen in argon, (2 2 2) peak of In₂O₃ decreases and resistivity increases for the deposited film. With further increase of oxygen in the sputtering gas mixture crystallinity in the film deteriorates and both the peaks disappeared. On the other hand, when 1.33% hydrogen is mixed with argon, the resistivity of the deposited film decreases to 5.5 × 10⁻⁴ Ω cm and the crystallinity remains almost unchanged. In case of reactive sputtering, the deposition rate is lower compared to that in case of non-reactive sputtering. HRTEM and first Fourier patterns show the highly crystalline structure of the samples deposited under Ar and Ar + H₂ ambients. Crystallinity of the film becomes lower with the introduction of oxygen in argon but refractive index increases from 1.86 to 1.9. The surface morphology of the ITO films have been studied by high resolution scanning electron microscopy.     

Transport and percolation in a low-density high-mobility two-dimensional hole system

We present a study of the temperature and density dependence of the resistivity of an extremely high quality two-dimensional hole system grown on the (100) surface of GaAs. For high densities in the metallic regime (p > or approximately4x10;{9} cm;{-2}), the nonmonotonic temperature dependence ( approximately 50-300 mK) of the resistivity is consistent with temperature dependent screening of residual impurities. At a fixed temperature of T=50 mK, the conductivity versus density data indicate an inhomogeneity driven percolation-type transition to an insulating state at a critical density of 3.8x10;{9} cm;{-2}.     

Kink instability of a highly deformable elastic cylinder

When a soft elastic cylinder is bent beyond a critical radius of curvature, a sharp fold in the form of a kink appears catastrophically at its compressed side while the tensile side remains smooth. The critical radius increases linearly with the diameter of the cylinder but remains independent of its material properties such as modulus; the maximum deflection at the location of the kink depends on both the material and geometric properties of the cylinder. The catastrophic dynamics of evolution of the kink depicts propagation of a shear wave from the location of the kink towards the edges signifying that kinking is an elastic response of the material which results in extreme localization of curvature. We have rationalized this phenomenon in the light of the classical Euler's buckling instability in slender elastic rods.     

Carrier transport in two-dimensional graphene layers

Carrier transport in gated 2D graphene monolayers is considered in the presence of scattering by random charged impurity centers with density n(i). Excellent quantitative agreement is obtained (for carrier density n>10(12) cm(-2)) with existing experimental data. The conductivity scales linearly with n/n(i) in the theory. We explain the experimentally observed asymmetry between electron and hole conductivities, and the high-density saturation of conductivity for the highest mobility samples. We argue that the experimentally observed saturation of conductivity at low density arises from the charged impurity induced inhomogeneity in the graphene carrier density which becomes severe for n less, similarn(i) approximately 10(12) cm(-2).     

SHI induced modification in CR-39 polycarbonate by positron annihilation lifetime studies

CR-39 is a polycarbonate widely used as SSNTD for recording nuclear charged particles and in other applications. Latent ion tracks produced in the polymers due to the damage produced by the passage of Swift Heavy Ions contain amorphous material with highest degree of disorder, changing the free volume properties which have strong correlation with the macroscopic properties of the material. Positron annihilation lifetime spectroscopy (PALS) provides direct information about the dimension, content and hole size distribution of free volume in polymers. The effect of irradiation of ⁴⁰Ar (14.9 MeV/n) ions on CR-39 polycarbonate by Positron Annihilation Lifetime Spectroscopy (PALS) is reported here. PALS provides a non-destructive and non-interfering probe, having high detection efficiency for free volume hole properties. From o-Ps lifetime mean free volume hole radius and average free volume of the micro-voids have been calculated. PAL measurement shows an increase in free volume on irradiation.     

Optical and electric properties of Nb-doped anatase TiO2 single crystal

Nb-doped anatase TiO₂ single crystal has been grown by chemical vapour transport method. Raman spectra shows that the obtained crystal with Nb of 0.08 wt% has typical anatase structure. An absorption band was observed at around 2.2 eV, which seems to be due to the d-d transition in the conduction band. The electron paramagnetic resonance and electric resistivity measurements show that the doped niobium makes quite shallow donor level whose orbital is d_xy-like centered at the titanium position of anatase.     

Investigations of magnetic and dielectric properties of cupric oxide nanoparticles

Cupric oxide nanoparticles of ∼8-10 nm width and 40-45 nm length self assembled as large particles ∼1-1.5 μm have been investigated, in the 10-325 K temperature range, using magnetic and dielectric measurements. In magnetic measurements a single broad peak at ∼230 K in a zero field cooled sample has been observed. Coercivity, in magnetization measurements at 10 K, suggests that the nanoparticles are core-shell type particles with an antiferromagnetic core and a ferromagnetic shell. Dielectric measurements, at various frequencies from 3.7 Hz to 949 kHz, exhibit a sharp peak at 284 K followed by weak anomalies around 213 and 230 K.     

Controlled Space Radiation concept for mesh-free semi-analytical technique to model wave fields in complex geometries

Numerical modelling of the ultrasonic wave propagation is important for Structural Heath Monitoring and System Prognosis problems. In order to develop intelligent and adaptive structures with embedded damage detector and classifier mechanisms, detailed understanding of scattered wave fields due to anomaly in the structure is inevitably required. A detailed understanding of the problem demands a good modelling of the wave propagation in the problem geometry in virtual form. Therefore, efficient analytical, semi-analytical or numerical modelling techniques are required. In recent years a semi-analytical mesh-free technique called Distributed Point Source Method (DPSM) is being used for modelling various ultrasonic, electrostatic and electromagnetic wave field problems. In the conventional DPSM approach point sources are placed along the transducer faces, problem boundaries and interfaces to model incident and scattered fields. Every point source emits energy in all directions uniformly. Source strengths of these 360° radiation sources are obtained by satisfying interface and boundary conditions of the problem. In conventional DPSM modelling approach it is assumed that the shadow zone does not require any special consideration. 360° Radiation point sources should be capable of properly modelling shadow zones because all boundary and interface conditions are satisfied. In this paper it is investigated how good this assumption is by introducing the ‘shadow zone’ concept at the point source level and comparing the results generated by the conventional DPSM and by this modified approach where the conventional 360° radiation point sources are replaced by the Controlled Space Radiation (CSR) sources.