Enrichment of Quercetin from Winemaking Residual Diatomaceous Earth via a Tailor-Made Imprinted Adsorbent

Residual diatomaceous earth (RDE) from winemaking activities is a rich and currently underexploited source of phenolic compounds which ought to be recycled from the perspective of circular bioeconomy. In this work, we demonstrate the feasibility of molecularly imprinted polymers (MIPs) for the enrichment of quercetin, a flavonoid at a fairly high content in residual diatomaceous earth. These MIPs were synthesized through free radical polymerization. FTIR confirmed the integration of the functional monomers into the polymeric chains. Batch adsorption experiments were used to assess the retention and selectivity of those MIPs towards quercetin. Commercial resins were compared with the synthesized materials using the same procedures. These adsorption experiments allowed the selection of the best performing MIP for the valorization of RDE extract. This treatment consisted of saturating the selected MIP with the extract and then desorbing the retained compounds using solvents of selected compositions. The desorbed fractions were analyzed using liquid chromatography, and the results demonstrated an increase in quercetin’s fractional area from 5% in the RDE extract to more than 40% in some fractions, which is roughly an eightfold enrichment of quercetin. Moreover, other flavonoids of close chemical structure to quercetin have been rather retained and enriched by the MIP.     

Effect of Sonication on Microwave Inactivation Kinetics of Enterococcus faecalis in Dairy Effluent

The aim of this study is to inactivate Enterococcus faecalis ATCC 29212 present in dairy wastewater effluent using microwave (MW) waves and/or ultrasound waves (US). The ultrasonic bath treatment (35 kHz) had no significant effect on the reduction of the survival rate (predominant declumping effect). At 650 W of microwave treatment, the total destruction was completed at 75 s, while at 350 W a 3 log reduction was achieved. The Weibull model was fitted to the survival curves to describe the inactivation kinetics, and the effect of the combined microwave-ultrasound treatments was evaluated. The scaling parameter α that was estimated from the inactivation kinetics for the microwaves combined with the ultrasound waves in pre-treatment was found to be lower than the scaling parameters obtained in post-treatment, which were in turn lower than those estimated for microwaves or ultrasound waves alone. The use of the ultrasound waves in pre-treatment was more effective than in post-treatment; a total reduction was achieved using a combination of US (30 min) followed by MW (650 W) with α = 28.3 s, while 4.0 log was obtained by reversing all processes with α = 34.5 s. The results from the protein assays indicate that the bacterial wall was damaged and that holes were formed from which protein leakage occurred.     

Polyacrylonitrile-based gel polymer electrolyte filled with Prussian blue forhigh-performance lithium polymer batteries

Lithium polymer batteries(LPBs) rely on a high ion transport to gain improved cell performance.Thermostable and porous gel polymer electrolytes(GPEs) have attracted much attention due to their excellent properties in electrolyte wettability and ionic conductivity.In this work,iron-nickel-cobalt trimetal Prussian blue analogue(PBA) nanocubes are filled into the electro spun polyacrylonitrile(PAN)-based membranes to generate GPE composites with morphological superiority consisting of fine fibers and interconnected pores.The thus obtained PBA@PAN fibrous membrane showcases good thermal stability,high porosity and electrolyte uptake,as well as a peak io nic conductivity of 2.7 mS/cm with the addition of 10% PBA,Consequently,the assembled lithium iron phosphate(LiFePO_4) battery using PBA@PAN-10 as the GPE delivers a high capacity of 152.2 mAh/g at 0.2 C and an ultralow capacity decay of0.09% per cycle in a long-te rm cycle life of 350 cycles at 1 C,endorsing its promising applications in LPBs.     

An Interferometric Optical Technique for In-Situ Measurement of Fiber Diameter

The diameter distribution of fibers plays an important role in the performance of many fiberglass products. The fiberglass industry, however, currently lacks the advanced instrumentation necessary for performing on-line fiber diameter measurements. Enhanced measurement capabilities would provide manufacturers and researchers a tool to improve fiberizing methods, production efficiency, and overall fiberglass product performance. This paper describes the size measurement of moving glass fibers using the Phase Doppler Anemometry technique. Simulation results are presented and validated experimentally. Theoretical modeling uses the mathematical solution for a tilted circular cylinder interacting with focused Laser beams. Experimental laboratory studies have been also conducted to evaluate the factors not included in the theoretical models.     

A Device for Phase Shift Measurement in an Advanced Phase Doppler Velocimeter

Construction and performance of a printed circuit board is described that is built for phase measurement in a state-of-the-art phase Doppler system. Special requirements in treating phase Doppler signals are highlighted and shown to be met satisfactorily by an innovative electronic design that involves signal burst detection, multi-bit sampling, frequency-band narrowing, and phase signal validation based on integrated amplitude and waveform recognition. Performance of the device is measured in terms of phase accuracy for various signal-to-noise ratios, signal frequencies and operating temperatures. The present device is also compared with some alternative techniques for phase measurement.     

Existence and asymptotic behavior of solutions of semilinear Cauchy problems with non dense domain via extrapolation spaces

In this work we study the existence and the uniqueness of bounded and almost periodic, asymptotic almost periodic or Eberlein-weak periodic solutions to the Cauchy problems with non dense domain.     

In Vitro and In Silico Anti-Acetylcholinesterase Activity from Macaranga tanarius and Syzygium jambos

Macaranga tanarius (MT) and Syzygium jambos (SJ) are pharmacologically reported to have anti-oxidant, anti-inflammatory, and anti-diabetic effects, and can be neuroprotective agents. Our previous work revealed that MT and SJ exhibited 76.32% and 93.81% inhibition against acetylcholinesterase (AChE) at 50 μg/mL final concentration in their ethyl acetate and hexane fractions, respectively. This study was aimed to investigate the bioactive constituents of MT and SJ and their molecular mechanism toward AChE inhibition. Bioassay-guided isolation afforded prenylflavonoids 1–3 from MT and anacardic acid derivatives 4 and 5 from SJ that were confirmed by NMR and MS data. Compound 5 exerted the strongest anti-AChE potential (IC₅₀: 0.54 μM), followed by 1, 4, 3, and 2 (IC₅₀: 1.0, 2.4, 6.8, and 33 μM, respectively). In silico molecular docking revealed 5 formed stronger molecular interactions including three H-bonds than its derivative 4 based on the saturation of their alkyl chains. The addition of a five carbon-prenyl chain in 1 increased the number of binding interactions, justifying its greater activity than derivatives 2 and 3. This research reflects the first report of AChE inhibitors from these species, thereby adding pharmacological values to MT and SJ as potential remedies in neuroprotection.