Numerical Estimation of the Degree of Reservoir Permeability Heterogeneity Using Pressure Drawdown Tests

This study aims to correlate the response of pressure transient test to permeability distribution type. For this purpose, correlated permeability distributions in x–y direction are generated using fractional Brownian motion (fBm) as it has been shown in literature that permeability in carbonate reservoirs exhibits an fBm type distribution horizontally. 2-D fBm permeability distributions created using mid point displacement method are employed as data to a black oil simulator. The intermittence exponent, H or fractal dimension of the distribution, D, as defined by D=2 – H, characterizes the distribution type. All permeability distributions are normalized to represent the same arithmetic mean (20, 100, and 500 mD) and uniform variance so that only their fractal dimension that underlies the smoothness of the distribution distinguishes them. Many different realizations of permeability distributions are generated based on the random number seeds used and pressure transient (drawdown) tests are simulated using a black oil simulator package (ECLIPSE 100). Pressure transient analysis is performed using PanSystem package. As a base case and for the comparison purpose, the same procedure is repeated for the totally homogeneous case (the same permeability for all grids) and a random (normally distributed) permeability distribution with the same mean and uniform variance. The effects of permeability distribution type on the pressure response are clarified. A strong impact of heterogeneity is observed as an increase in skin effect with increasing fractal dimension of permeability distribution. This additional (or pseudo) skin effect due to heterogeneity is correlated to the fractal dimension of the permeability distribution. As a further step, the procedure is repeated for different flow rates applied during the drawdown test. The correlation between the fractal dimension of permeability distribution and additional skin is improved by incorporating the rate into it. The methodology followed can be used in the assessment of reservoir heterogeneity quantitatively using pressure transient response.     

Effects of ultrasonic waves on the interfacial forces between oil and water

The effect of ultrasound on flow through a capillary using the pendant drop method was investigated. Water was injected into a 0.1 mm Hastelloy C-276 capillary tube submersed into several mineral oils with different viscosity, and kerosene. The average drop rate per minute was measured at several ultrasonic intensities. We observed that there exists a peak drop rate at a characteristic intensity, which strongly depends on oil viscosity and the interfacial tension between water and the oil. The semi-quantitative results reveal that the remarkable change in the interfacial forces between oil and water could be the explanation to the enhancement of oil recovery when the ultrasonic waves are applied.     

Diethylstilbestrol glucuronide (DESG): synthesis, labeling with radioiodine and in vivo/in vitro evaluations

Diethylstilbestrol (DES) is a synthetic non-steroidal estrogen, pharmacologic effects of which resemble natural estrons; today it is being used to treat some types of postmenopausal breast cancer and advanced prostate cancer. The aim of current study is conjugation of glucuronic acid (G) to DES and to evaluate radiopharmaceutical potential of this estrogen glucuronide derivative (DESG) which is specific to β glucuronidase enzyme consisting tumor cells. Taking into consideration the compatibility to the chemical structures of the synthesized product, ¹³¹I and ¹²⁵I were chosen as the appropriate radionuclides and DESG was labeled with these radionuclides utilizing iodogen method. The radiochemical yields of ^125/131I-DESG were over 90 % according to thin layer radio chromatography method. The biodistribution of ¹³¹I-DESG in healthy female Wistar Albino rats has been investigated and the range of the breast/blood and breast/muscle ratios were approximately 2 and 13 in 240 min for ER unsaturated studies. Effects of the radioiodinated DES and DESG on the cells were examined using MCF-7, A-549, Caco-2 cell lines. ¹²⁵I-DESG has higher incorporation percentages than ¹²⁵I-DES on MCF-7 cells. The radioiodinated DESG has the desired radiopharmaceutical properties which could be candidate radiopharmaceuticals for diagnosis and especially radionuclide therapy of breast tumors.     

Micellisation and gelation of diblock copolymers of ethylene oxide and propylene oxide in aqueous solution, the effect of P-block length

The aqueous solution properties of five diblock copolymers prepared by sequential anionic copolymerisation (i.e. E₁₀₂P₃₇, E₁₀₄P₅₂, E₉₂P₅₅, E₁₀₄P₆₀ and E₉₈P₇₃ where E denotes oxyethylene and P denotes oxypropylene) were studied across a wide range of concentration. The techniques used to study micellisation and micellar properties in dilute solution were static and dynamic light scattering, surface tension, and eluent gel-permeation chromatography. The gelation of concentrated solutions was also investigated. As expected, the critical micelle concentration (CMC) was lowered and the association number of the micelles was increased by an increase in P-block length. In contrast, the critical gel concentration was unchanged, consistent with the constant E-block length leading to micelles with essentially identical E-block fringes. Comparison of the CMCs of the diblock copolymers with those of triblock E_mP_nE_m copolymers with the same P-block length shows the diblock copolymers to micellise more efficiently. A similar comparison of the CMCs of the diblock copolymers with those of E_mB_n copolymer (B denotes oxybutylene) shows the hydrophobicity of a P unit to be one-sixth that of a B unit. The possibility is explored of correlating the limiting association number of a spherical micelle with the hydrophobe block length of its constituent copolymer. Of the five copolymers, only dilute solutions of E₉₈P₇₃ were predominantly micellar at both room temperature and body temperature, and this copolymer must be a prime candidate in any consideration of the potential application of E_mP_n copolymers in the solubilisation and controlled release of drugs.     

Technological and economical analysis of salient pole and permanent magnet synchronous machines designed for wind turbines

Chinese export restrictions already reduced the planning reliability for investments in permanent magnet wind turbines. Today the production of permanent magnets consumes the largest proportion of rare earth elements, with 40% of the rare earth-based magnets used for generators and other electrical machines. The cost and availability of NdFeB magnets will likely determine the production rate of permanent magnet generators. The high volatility of rare earth metals makes it very difficult to quote a price. Prices may also vary from supplier to supplier to an extent of up to 50% for the same size, shape and quantity with a minor difference in quality.     

Oxidative Stress Parameters of L929 Cells Cultured on Plasma-Modified PDLLA Scaffolds

Oxidative stress may produce high level of reactive oxygen species (ROS) following cell exposure to endogenous and exogenous factors. Recent experiments implicate oxidative stress as playing an essential role in cytotoxicity of many materials. The aim of this study was to measure intracellular malondialdehyde (MDA), advanced oxidation protein product (AOPP) levels, and superoxide dismutase (SOD) activities of L929 fibroblasts cultured on PDLLA, polyethylene glycol (PEG), or ethylenediamine (EDA) grafted PDLLA by plasma polymerization method. Cell proliferation on these scaffolds was studied by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide assay. The study showed that MDA, AOPP levels, and SOD activities in L929 fibroblast cells cultured on all scaffolds were significantly different compared to the control group and each other. The highest MDA (0.42 ± 0.76 nmol/mg protein), AOPP (14.99 ± 4.67 nmol/mg protein) levels, and SOD activities (7.49 ± 3.74 U/mg protein) were observed in cells cultured on non-modified scaffolds; meanwhile, the most cell proliferation was obtained in EDA-modified scaffolds (MDA 0.15 ± 0.14 nmol/mg protein, AOPP 13.12 ± 3.86 nmol/mg protein, SOD 4.82 ± 2.64 U/mg protein). According to our finding, EDA- or PEG-modified scaffolds are potentially useful as suitable biomaterials in tissue engineering.     

Thermal Properties and Crystallinity of Thermotropic Liquid Crystalline Copolyesters Prepared from Poly(ethylene terephtalate) (PET) and Rigid Aromatic Units

A series of copolyesters were synthesized by melt‐polycondensation reaction of poly(ethylene terephtalate) (PET) with various proportions of equimolar compositions of p‐acetoxybenzoic acid (p‐ABA), hydroquinone diacetate (HQDA) and terephtalic acid (TPA). Viscosity, liquid crystallinity, thermal properties, degree of crystallinity and thermal stabilitiy of these copolyesters were investigated by Ubbelohde viscometer, hot‐stage polarized light microscopy (PLM), differential scanning calorimetry (DSC), wide‐angle X‐ray diffraction (WAXD) and thermogravimetric analysis (TGA), respectively. On the basis of viscosity measurement, it was observed that intrinsic viscosity values of the copolyesters are increased regularly with increasing amounts of aromatic units (p‐ABA, HQDA and TPA) in the polymer chain. Thermotropic liquid crystalline behavior was observed in the copolyesters containing over 50 mol% of rigid p‐ABA/HQDA/TPA aromatic units. DSC analysis of the anisotropic copolyesters revealed broad and weak endotherms associated with the nematic phases, and the melting temperatures were found to be in the processable region. As the mol% of PET in the polymer chain increased, the specific enthalpies of fusion and the degree of crystallinity of the copolyesters were also increased regularly.     

Comments on ‘Adiabatic shock capturing in perfect gas hypersonic flows’

Some comments are provided on the shock‐capturing techniques and stabilization parameters used in a recent paper (B.S. Kirk, Int. J. Numer. Meth. Fluids 2009; DOI: 10.1002/fld.2195 ) in conjunction with the SUPG formulation of compressible flows. Copyright © 2010 John Wiley & Sons, Ltd.