Total synthesis of (-)- and (+)-lentiginosine

Total synthesis of (-)-lentiginosine was achieved from D-mannitol using highly stereoselective reactions. Similarly, (+)-lentiginosine was synthesized from L-tartaric acid.     

General solution for Poisson-Boltzmann equation in semiinfinite planar symmetry

Self-assembled multilayer thin films have been prepared on Au substrate by alternate surface derivatization with L-cysteine hydrochloride and cupric perchlorate. The layer-by-layer structure at each step of multilayer formation was investigated by X-ray photoelectron spectroscopy. The measurements indicate that there are two structure modes in the multilayers. One is that Cu(2+) sandwiches between two amino acid groups. The other one is that Cu(+) is bonded through disulfide and thiolate. This process is also confirmed by cyclic voltammetry of Cu ion at different self-assembled multilayers. Steps further on will lead to repeated multilayer films.     

Role of Surface Molecular Architecture and Energetics of Hydrogen Bonding Sites in Adsorption of Polymers and Surfactants

Hydrogen bonding is generally thought to be an ubiquitous adsorption mechanism, which often foils selective adsorption schemes. Through investigation of hydrogen bonding energy and its dependence on surface molecular architecture, it may be possible to develop new methodologies to control the adsorption of surfactants and polymeric flocculants, depressants, and dispersants used in particulate processing industries. A model system using St?ber silica spheres and polyethylene oxide, a polymer known for its ability to form hydrogen bonds, was examined. The effect of two different surface treatments of the silica particles, calcination and rehydroxylation, upon the adsorption of two polymer molecular weights was studied. The adsorption behavior was then linked to the respective surface structures via characterization of the surfaces using FTIR, NMR, and Raman techniques. In this paper role of hydrogen bonding sites and surface architecture on adsorption is discussed. Copyright 2000 Academic Press.     

Phase transitions in chlorobenzene-cis-decalin mixtures

The dielectric constant ?' and loss tangent tan δ of chlorobenzene-cis-decalin mixtures have been measured in the temperature range 77 K to 330 K and frequency range 0.1 to 100 kHz. On cooling, ?' increases with decreasing temperature upto about 135 K, after which it drops rapidly with decreasing T followed by a slow decrease. This indicates that the liquid mixture goes to an amorphous phase which transforms to a glass phase of restricted dipole rotation below T_g; however, the peak in ?' is due to relaxation in the amorphous phase (α relaxation) and does not give an exact T_g. On heating, the behaviour of the cooling curve is retraced upto 160 K, after which ?' drops suddenly to a value lower than that at 77 K in the glass phase. This indicates the transition to a crystalline phase in which dipole rotational freedom is completely lost. The crystalline phase changes to a eutectic liquid phase of high ?' at a temperature (200 K) lower than the melting point of chlorobenzene and cis-decalin. Dielectric dispersion is observed only in the glass and amorphous phases. The dielectric relaxation time is independent of the concentration of chlorobenzene.     

Redox and oxo-abstraction Reactions of Silylamine with MoOCl4

Trimethylsilyldiethylamine Me₃SiNEt₂ and MoOCl₄ (1:1) undergo a free radical redox reaction in CH₂Cl₂ or Et₂O to form MoCl₃O(HNEt₂). Reduction occurs even in aprotic media like CCl₄ and CS₂ to give Mo^V complexes Mo₂Cl₆O₂(N₂Et₄) and Mo₂Cl₆O₂[(SCNEt₂)₂S₂], respectively. A 2:1 reaction in nonionizing protic solvents undergoes redox cum cleavage to provide MoCl₂O(NEt₂) (HNEt₂) but a reaction at reflux temperature in 1,2-dichloroethane leads to diethylammonium salt, [Et₂NH₂][MoCl₄O(HNEt₂)]. Higher molar reactions (3:1, 4:1) in CH₂Cl₂ or Et₂O are associated with redox reaction as well as oxygen atom abstraction to form de-oxo Mo^IV complex MoCl₃(NEt₂)(HNEt₂)₂, whereas, a 3:1 reaction in CS₂ forms Mo₂Cl₄O(S₂CNEt₂)₄. Compounds have been characterized by elemental analyses, redox titration, magnetic moment, conductance, infrared, electronic absorption and ¹H-NMR measurements.     

Effect of reaction media on the growth and photoluminescence of colloidal CdSe nanocrystals

Using cadium oxide (CdO) as the Cd precursor and tri-n-octylphosphine selenide (TOPSe) as the Se source, TOP-capped and TOP/tri-n-octylphosphine oxide (TOPO)-capped CdSe nanocrystals were synthesized without the use of an acid. The synthetic approach involved the addition of a TOPSe/TOP solution into a CdO/TOP solution with or without TOPO at one temperature and subsequent growth at a lower temperature. The temporal evolution of the optical properties, namely, absorption and luminescence, of the growing nanocrystals was monitored in detail. A comprehensive examination on the control of the photoluminescence (PL) properties was performed by systematically varying the TOP/TOPO weight ratio of the reaction media. Surprisingly, a rational choice of 100% TOP or 80% TOP was found to produce "quality" nanocrystals when monitored under the present experimental conditions and growth-time scale. The term "quality" is mainly based on the sharp features and rich substructure exhibited in the absorption spectra of the growing nanocrystals, as well as the sharp features in the emission spectra with narrow full width at half-maximum (fwhm). There are two distinguishable stages of growth: an early stage (<5 min) and a later stage. TOP plays a major role in the control of a slow growth rate in the early stage, while TOPO controls slow growth in the later stage. The optical sensitivity of the growing nanocrystals when dispersed in nonpolar or polar solvents was studied, including two size-dependent parameters, namely, the solvent sensitivity (PL intensity) and nonresonant Stokes shift (NRSS). The insights gained from the present study enable a synthetic approach in which high-quality CdSe nanocrystals are achieved with high synthetic reproducibility.     

Polymer electrolytes based on room temperature ionic liquid: 2,3-dimethyl-1-octylimidazolium triflate

Room temperature ionic liquid (DMOImTf) based upon 2,3-dimethyl-1-octylimidazolium cation and trifluoromethanesulfonate or triflate (CF(3)SO(3))(-) anion has been synthesized and shows conductivity of 5.68 mS/cm and viscosity of 26.4 cP at 25 degrees C. Ion conducting polymer electrolytes based on polymers (poly(ethylene oxide) (PEO) and polyvinylidenefluoride-co-hexafluoropropylene (PVdF-HFP)) and ionic liquid (DMOImTf) were prepared in film form by the casting technique. The conductivity of polymer electrolytes containing 0.5 M LiCF(3)SO(3) in PEO:DMOImTf taken in equal weight ratio increases with the addition of propylene carbonate (PC) while its mechanical stability improved by dispersing nanosize fumed silica. However, polymer electrolytes containing PVdF-HFP and ionic liquid show a high value of conductivity (10(-4)-10(-3) S/cm) alongwith better mechanical stability.     

Influence of Urbach Energy,Temperature, and Longitudinal Position in the Active Layer on Carrier Diffusion Length in Perovskite Solar Cells

The diffusion length of charge carriers in the active layer of a perovskite solar cell (PSC) of the structure Glass/PEDOT: PSS/CH₃NH₃PbI₃/PC60BM/Al is modelled. It is found that the diffusion length depends on the position x in the active layer measured from the PEDOT: PSS interface, Urbach energy and temperature. By varying the voltage in the range from zero to , it is shown that the dependence of diffusion length on the position x in the active layer reduces at higher voltage. The combined influence of applied voltage and temperature on the diffusion length of charge carriers is investigated and it is found that in the low voltage range the diffusion length is temperature independent, but it becomes significantly temperature dependent at higher voltages. Also, it is found that the diffusion length decreases as the applied voltage increases and this reduction becomes much more significant at higher voltage and temperatures. The combined influence of applied voltage and Urbach energy on diffusion length of charge carriers reveals that the diffusion length decreases when both the applied voltage and Urbach energy increase. However, the reduction in the diffusion length due to the increase in Urbach energy becomes less significant at higher voltage.     

Selective Spectrophotometric Determination of Copper in Milk with Phenanthraquinone Monothiosemicarbazone

The red complex formed by copper (II) and phenanthraquinone monothiosemicarbazone has an absorption maximum at 530 nm with a molar absorptivity of 14000 cm^?1 mole^?1. The pH range for the determination is 1.1–6.6. Optimum range of concentration for accurate determination is 0.50–3.47 ppm of copper (II) in 50% methanol medium. The limits of interference due to foreign ions have been studied. The method has been successfully employed for the determination of copper in various samples of milk.