Antiproliferative activity, antioxidant capacity and tannin content in plants of semi-arid northeastern Brazil

The objective of this study was to evaluate antiproliferative activity, antioxidant capacity and tannin content in plants from semi-arid northeastern Brazil (Caatinga). For this study, we selected 14 species and we assayed the methanol extracts for antiproliferative activity against the HEp-2 (laryngeal cancer) and NCI-H292 (lung cancer) cell lines using the (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazole) (MTT) method. In addition, the antioxidant activity was evaluated with the DPPH (2,2-diphenyl-2-picrylhydrazyl) assay, and the tannin content was determined by the radial diffusion method. Plants with better antioxidant activity (expressed in a dose able to decrease the initial DPPH concentration by 50%, or IC50) and with higher levels of tannins were: Poincianella pyramidalis (42.95±1.77 μg/mL IC50 and 8.17±0.64 tannin content), Jatropha mollissima (54.09±4.36μg/mL IC50 and 2.35±0.08 tannin content) and Anadenanthera colubrina (73.24±1.47 μg/mL IC50 and 4.41±0.47 tannin content). Plants with enhanced antiproliferative activity (% living cells) were Annona muricata (24.94±0.74 in NCI-H292), Lantana camara (25.8±0.19 in NCI-H292), Handroanthus impetiginosus (41.8±0.47 in NCI-H292) and Mentzelia aspera (45.61±1.94 in HEp-2). For species with better antioxidant and antiproliferative activities, we suggest future in vitro and in vivo comparative studies with other pharmacological models, and to start a process of purification and identification of the possible molecule(s) responsible for the observed pharmacological activity. We believe that the flora of Brazilian semi-arid areas can be a valuable source of plants rich in tannins, cytotoxic compounds and antioxidant agents.     

Characterization of dental composites by thermal analysis, infrared spectroscopy and scanning electron microscopy

Commercial light-cured dental composites were used in this study. Two laboratorial composites, Resilab (Wilcos/Brazil), Epricord (Kuraray/Japan) were compared under cured and uncured conditions. Thermal analysis, infrared spectroscopy and scanning electron microscopy were used to evaluate the dental composites. The mass change and heat flow signals (TG–DSC) were recorded simultaneously by using STA 409 PC Luxx (NETZSCH), in the 25–800 °C temperature range at a heating rate of 10 °C/min under nitrogen atmosphere (70 mL/min). Employing thermo-microbalance TG 209 C F1 Iris (NETZSCH) coupled to the BRUKER Optics FTIR TENSOR, the samples were analyzed by combined thermogravimetric and spectroscopic methods (TG–FTIR). The initial sample mass was about ~12 mg, the data collection have been done in the 35–800 °C temperature range at a heating rate of 20 K/min in nitrogen atmosphere (flow rate: 40 mL/min). Finally, superficial topographic was analyzed by scanning electron microscopy (SEM). Dental composite evaluation suggests a high thermal stability and inorganic content in RES D sample. Degrees of conversion (DC) values were almost the same and there was no direct relationship between DC and amount of particles and size. Similar compositions were found in all samples.     

Characterization of Cellulolytic Extract from <Emphasis Type="Italic">Pycnoporus sanguineus</Emphasis> PF-2 and Its Application in Biomass Saccharification

The aim of this work was to evaluate the biochemical features of the white-rot fungi Pycnoporus sanguineus cellulolytic complex and its utilization to sugarcane bagasse hydrolysis. When cultivated under submerged fermentation using corn cobs as carbon source, P. sanguineus produced high FPase, endoglucanase, β-glucosidase, xylanase, mannanase, α-galactosidase, α-arabinofuranosidase, and polygalacturonase activities. Cellulase activities were characterized in relation to pH and temperature. β-Glucosidase and FPase activities were higher at 55 °C, pH 4.5, and endoglucanase activity was higher at 60 °C, in a pH range of 3.5–4.0. All cellulase activities were highly stable at 40 and 50 °C through 48 h of pre-incubation. Crude enzymatic extract from P. sanguineus was applied in a saccharification experiment using acid-treated and alkali-treated sugarcane bagasse as substrate, and the hydrolysis yields were compared to that obtained by a commercial cellulase preparation. Reducing sugar yields of 60.4% and 64.0% were reached when alkali-treated bagasse was hydrolyzed by P. sanguineus extract and commercial cellulase, respectively. Considering the glucose production, it was observed that P. sanguineus extract and commercial cellulase ensured yields of 22.6% and 36.5%, respectively. The saccharification of acid-treated bagasse was lower than that of alkali-treated bagasse regardless of the cellulolytic extract. The present work showed that P. sanguineus has a great potential as an enzyme producer for biomass saccharification.     

Fluorescent tetraruthenated porphyrins embedded in monolithic SiO2 gels by the sol-gel process

In this work silica gels have been prepared by a sol-gel method using tetraethylorthosilicate as gel precursor. The tetraruthenated porphyrins H2(3-TRPyP), Co(3-TRPyP), and H2(4-TRPyP) were incorporated into the systems during gel formation without problems commonly found in the process, such as aggregation. Spectroscopic studies of the resulting silica gels revealed the presence of absorption bands in the range 200-400 nm associated with the transitions of the groups ruthenium-bipyridine, along with the Soret band at the same wavelengths observed in solution. The porphyrins were found to preserve fluorescence emission properties in the range 650-700 nm even after the aging period. Study of the thermal behavior and decomposition kinetics evidenced that the porphyrin H2(4-TRPyP) is the least stable of the group and that all compounds decompose according to first-order kinetics.     

A novel strategy to verification of adulteration in alcoholic beverages based on Schlieren effect measurements and chemometric techniques

A novel strategy to evaluation of adulteration in alcoholic beverages based on the measurement of the Schlieren effect using an automated FIA system with photometric detection is proposed. The assay is based on the Schlieren effect produced when beverage samples are injected in a single-line FIA system that uses water as carrier stream and a light-emitting diode-phototransistor photometer controlled by microcomputer as detector. The flow system presents limited mixing conditions which make possible to create gradients of refractive index (Schlieren effect) in the injected sample zone. These gradients are reproducible, characteristic of each alcoholic beverage and undergo specific modifications when adulterations with water or ethanol are imposed. Schlieren effect data of brandies, cachaças, rums, whiskies and vodkas were treated by SIMCA to elaborate class models applied in the evaluation of alcoholic beverages adulteration. Samples of the original matrix of each sort of beverages were adulterated in laboratory by adding water, methanol and ethanol in levels of 5% and 10% (v/v). These samples were used as test set to validate SIMCA class models. The verification of authenticity using Schlieren effect measurements presented good results making possible to identify 100% of the beverages samples adulterated in laboratory and 93% of the actual adulterated alcoholic beverages with confidence levels of 95%. As principal advantage, the automated system does not use reagents to carry out the analysis.     

Adsorption of anionic dyes on chitosan beads. 1. The influence of the chemical structures of dyes and temperature on the adsorption kinetics

In this work, chitosan beads were synthesized in acidic medium and cross-linked in 1% glutaraldehyde solution. The characterization of the materials using TG/DTG, XRD, and BET surface areas showed that the beads did not modify their characteristics after the cross-linking reaction. The cross-linked beads were utilized as adsorbents for the removal of the yellow-, blue-, and red-anionic reactive dyes from aqueous solutions at pH 2.0. Adsorption of the yellow-dye increased from 25 to 50 degrees C. However, adsorption of the blue-dye decreased from 25 to 50 degrees C. Interestingly, the adsorption of the red-dye decreased from 25 to 35 degrees C and increased from 45 to 50 degrees C. The kinetic data were evaluated using an Avrami kinetic model, where the parameter n was related to the determination of changes in the adsorption mechanisms. Adsorption data of the dyes in relation to the contact time, the chemical structures of the dyes, and temperature were presented and were discussed.     

Gd(III) chelates as NMR probes of protein-protein interactions. Case study: rubredoxin and cytochrome c3

Two cyclen-derived Gd probes, [Gd-DOTAM](3+) and [Gd-DOTP](5-) (DOTAM = 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetamide; DOTP = 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetrakis(methylenephosphonate)), were assessed as paramagnetic relaxation enhancement (PRE)-inducing probes for characterization of protein-protein interactions. Two proteins, Desulfovibrio gigas rubredoxin and Desulfovibrio gigas cytochrome c(3), were used as model partners. In a (1)H NMR titration it was shown that [Gd-DOTP](5-) binds to cytochrome c(3) near heme IV, causing pronounced PREs, characterized by line width broadenings of the heme methyl resonances at ratios as low as 0.08. A K(d) of 23 ± 1 μM was calculated based on chemical shift perturbation of selected heme methyl resonances belonging to three different heme groups, caused by allosteric effects upon [Gd-DOTP](5-) binding to cytochrome c(3) at a molar ratio of 2. The other probe, [Gd-DOTAM](3+), caused PREs on a well-defined patch near the metal center of rubredoxin (especially the patch constituted by residues D19-G23 and W37-S45, which broaden beyond detection). This effect was partially reversed for some resonances (C6-Y11, in particular) when cytochrome c(3) was added to this system. Both probes were successful in causing reversible PREs at the partner binding site, thus showing to be good probes to identify partners' binding sites and since the interaction is reversible to structurally characterize protein complexes by better defining the complex interface.     

Raman spectroscopic investigation on the microenvironment of the liver tissues of Zebrafish (Danio rerio) due to titanium dioxide exposure

Nano titanium dioxide (nTiO₂), generally considered to be toxicologically inert, is manufactured in large quantities and extensively applied in consumer products. The small size and large surface area endow them with an active group or intrinsic toxicity. Advances in instrumentation are making Raman spectroscopy the tool of choice for an increasing number of (bio) chemical applications. One of the great advantages of this technique is its ability to provide information on the concentration, structure and interaction of biochemical molecules in their microenvironments within intact cells and tissues, non-destructively. Zebrafish (Danio rerio), one of the most important vertebrate model organisms used in developmental biology, are increasingly used in biomedical research, particularly as a model of human disease. In the present work, an attempt is made to study the effect of titanium dioxide, both nano and bulk, on the microenvironment of the liver tissues of Zebrafish using FT-Raman spectroscopy. The results of the present study suggest that TiO₂ exposure demonstrate a marked influence on the microenvironments of the liver tissues of Zebrafish. A shift to a higher wavenumber and an increase in the intensity of the band at ∼1087 cm⁻¹ in the TiO₂ exposed tissues suggest that some of the conformational changes resulting from the alkali recovery process takes place due to TiO₂ exposure. The decreased intensity ratio (I₃₂₂₀/I₃₄₀₀) observed in the titanium-exposed tissues suggests a decreased water domain size, which could be interpreted in terms of weaker hydrogen-bonded molecular species of water in the TiO₂ exposed tissues. The observed shift of COO⁻ bands to higher frequencies shows the disruption of salt bridges as a result of a change in the oppositely charged partners and due to the enhanced random coil conformation. The variation in the intensity ratio of the tyrosyl doublet (I₈₅₈/I₈₂₅) indicates variation in the hydrogen bonding of the phenolic hydroxyl group due to TiO₂ exposure. The results further suggest that the microenvironments are greatly altered due to titanium nano exposure when compared to titanium bulk. In conclusion, the results indicate that FT-Raman spectroscopy might be a useful tool for rapid assessment of nano particle biological interactions.     

Fluence Rate Determines PDT Efficiency in Breast Cancer Cells Displaying Different GSH Levels

Photodynamic therapy (PDT) appears as a promising alternative in the treatment of breast cancer since it can be highly effective in curing cancer while preserving normal tissue. However, predicting outcomes in PDT still constitutes a great challenge. One of the parameters that are usually empirically determined is the rate of photon flux delivered to the tissue (light fluence rate). In the present study, we intended to understand why monolayers of human cells derived from mammary adenocarcinomas (MDA-MB-231 and MCF-7) respond quite differently to fluence rates (cells were irradiated either for 6 or for 16 min) at a fixed light dose (4.5 J cm⁻²) delivered with an array of LEDs in a typical methylene blue PDT protocol. While death rates of MDA-MB-231 cells were insensitive to the fluence rate, MCF-7 cells showed a quite impressive (three times) decrease in cell death levels in the shorter irradiation protocol. Independent on cell type cell death was invariably correlated with the depletion of reduced glutathione intracellular levels and consequently with widespread redox misbalance. Our data show the potential to optimize fluence rates to provide exhaustion of the cell antioxidant responses in order to circumvent therapy resistance of breast tumors.