Na27Ru14O48: A new mixed-valence sodium ruthenate with magnetic heptameric plaquettes

Na₂₇Ru₁₄O₄₈ has been synthesized in air at 700 °C. The composition and crystal structure of the phase were determined by single crystal X-ray diffraction. The triclinic crystal structure contains isolated planar Ru₇O₂₄ plaquettes made from seven edge-sharing RuO₆ octahedra. The complex Na:Ru ratio is a result of tilting of the plaquettes to disrupt the packing of nominally hexagonal close packed planes made of Na ions and RuO₆ octrahedra. Resistivity measurements show that the material is semiconducting with an activation energy of 0.53 eV. The observed magnetic moment of 3.11 μ_B per Ru is lower than the expected spin only value, but is within the range seen in other compounds and is too large to indicate that the fundamental magnetic entities are the isolated Ru₇O₂₄ plaquettes. Small, reproducible deviations in the Curie-Weiss behavior occur below 200 K and the onset of a broad magnetic transition is seen between 40 and 32 K.     

Syntheses and thermal reactivities of tetradentate metalloenediynes of Cu(II) and Zn(II)

The syntheses and Bergman cyclization temperatures of disubstituted tetradentate enediyne ligands based on a dibenzylethylenediamine backbone are reported relative to the corresponding Cu(II) and Zn(II) analogues. For these compounds, the R-groups dimethylamine (dma), pyridine (py), quinoline (quin), and 3-oxypyridine (pyO) have been symmetrically and asymmetrically incorporated at the alkyne termini positions directly (0:0) or via a methylene spacer (1:0, 0:1, 1:1). Electron paramagnetic resonance (EPR) reveals that all Cu(II) complexes are monomeric with near axial symmetry and g-values (g(x) approximately 2.04, g(y) approximately 2.09 g(z) approximately 2.25) representative of tetragonal Cu(II) geometries. The hyperfine splitting parameter A(z) values are approximately 170 x 10(-)(4) cm(-)(1), which is consistent with distorted 4-coordinate, or weakly 6-coordinate, structures. In contrast, solution conductivity measurements show that Zn(II) complexes with rigid py or quin ligands (e.g., py-py 0:0, py-quin 0:0) behave as 1:4 electrolytes indicative of dimeric, bridging enediyne structures. Consequently, these Zn(II) complexes have very high Bergman cyclization temperatures (>290 degrees C), while their less rigid, 1:1 analogues (<185 degrees C) and monomeric Cu(II) counterparts (110-136 degrees C) have markedly lower cyclization temperatures. The results underscore the important consequences metal center structure plays in influencing Bergman cyclization temperatures of metalloenediynes.     

Determination of isoflavones in soy and selected foods containing soy by extraction, saponification, and liquid chromatography: collaborative study.

Isoflavones are biologically active compounds occurring naturally in a variety of plants, with relatively high levels found in soybeans. Twelve laboratories participated in a collaborative study to determine the aglycon isoflavone content of 8 test samples of soy and foods containing soy. The analytical method for the determination of isoflavones incorporates a mild saponification step that reduces the number of analytes measured and permits quantitation versus commercially available, stable reference standards. Test samples were extracted at 65 degrees C with methanol-water (80 + 20), saponified with dilute sodium hydroxide solution, and analyzed by reversed-phase liquid chromatography with UV detection at 260 nm. Isoflavone results were reported as microg/aglycon/g or microg aglycon equivalents/g. The 8 test samples included 2 blind duplicates and 4 single test samples with total isoflavone concentrations ranging from approximately 50 to 3000 microg/g. Test samples of soy ingredients and products made with soy were distributed to collaborators with appropriate reference standards. Collaborators were asked to analyze test samples in duplicate on 2 separate days. The data were analyzed for individual isoflavone components, subtotals of daidzin-daidzein, glycitin-glycitein, and genistin-genistein, and total isoflavones. The relative standard deviation (RSD) for repeatability was 1.8-7.1%, and the RSD for reproducibility was 3.2-16.1% for total isoflavone values of 47-3099 microg/g.     

Cost-effective interrogation of single nucleotide polymorphisms using the mismatch amplification mutation assay and capillary electrophoresis

The ability to characterize SNPs is an important aspect of many clinical diagnostic, genetic and evolutionary studies. Here, we designed a multiplexed SNP genotyping method to survey a large number of phylogenetically informative SNPs within the genome of the bacterium Bacillus anthracis. This novel method, CE universal tail mismatch amplification mutation assay (CUMA), allows for PCR multiplexing and automatic scoring of SNP genotypes, thus providing a rapid, economical and higher throughput alternative to more expensive SNP genotyping techniques. CUMA delivered accurate B. anthracis SNP genotyping results and, when multiplexed, saved reagent costs by more than 80% compared with TaqMan real-time PCR. When real-time PCR technology and instrumentation is unavailable or the reagents are cost-prohibitive, CUMA is a powerful alternative for SNP genotyping.     

Dimethylsilyl- and methylene-bridged aromatic groups : III. Electron spin resonance spectra of anion radicals

From the ESR spectra of anion radicals of bis(4-biphenylyl)dimethylsilane and 4,4′-bis(4-biphenylyldimethylsilyl)biphenyl, the delocalization of spin density is inferred. The bridging SiMe₂-groups separate practically independent π-systems. The rate of electron transfer between biphenyl sub-units is less than ～ 10⁶ sec^?1 at 223 K.     

Enantioselective Total Synthesis of Macfarlandin C,a Spongian Diterpenoid Harboring a Concave‐Substituted cis‐Dioxabicyclo[3.3.0]octanone Fragment

The enantioselective total synthesis of the rearranged spongian diterpenoid (?)‐macfarlandin C is reported. This is the first synthesis of a rearranged spongian diterpenoid in which the bulky hydrocarbon fragment is joined via a quaternary carbon to the highly hindered concave face of the cis‐2,8‐dioxabicyclo[3.3.0]octan‐3‐one moiety. The strategy involves a late‐stage fragment coupling between a tertiary carbon radical and an electrophilic butenolide resulting in the stereoselective formation of vicinal quaternary and tertiary stereocenters. A stereoselective Mukaiyama hydration that orients a pendant carboxymethyl side chain cis to the bulky octahydronapthalene substituent was pivotal in fashioning the challenging concave‐substituted cis‐dioxabicyclo[3.3.0]octanone fragment.     

A cadmium hydroxide complex of a N3S-donor ligand containing two hydrogen bond donors: synthesis, characterization, and CO2 reactivity

Treatment of the ebnpa (N-2-(ethylthio)ethyl-N,N-bis((6-neopentylamino-2-pyridyl)methyl)amine) ligand with a molar equivalent amount of Cd(ClO(4))(2).5H(2)O in CH(3)CN followed by the addition of [Me(4)N]OH.5H(2)O yielded the cadmium hydroxide complex [(ebnpaCd)(2)(mu-OH)(2)](ClO(4))(2) (1). Complex 1 has a binuclear cation in the solid-state with secondary hydrogen-bonding and CH/pi interactions involving the ebnpa ligand. In acetonitrile, 1 forms a binuclear/mononuclear equilibrium mixture. The formation of a mononuclear species has been confirmed by conductance measurements of 1 at low concentrations. Variable temperature studies of the binuclear/mononuclear equilibrium provided the standard enthalpy and entropy associated with the formation of the monomer as DeltaH degrees = +31(2) kJ mol(-1) and DeltaS degrees = +108(8) J mol(-1) K(-1), respectively. Enhanced secondary hydrogen-bonding interactions involving the terminal Cd-OH moiety may help to stabilize the mononuclear complex. Treatment of 1 with CO(2) in acetonitrile results in the formation of a binuclear cadmium carbonate complex, [(ebnpaCd)(2)(mu-CO(3))](ClO(4))(2) (2).     

Elastic constants of B-A1 composites by ultrasonic velocity measurements

The complete orthotropic elastic-stiffness matrix of unidirectional, Borsic-filament-reinforced aluminum composites was experimentally evaluated for three different volume fractions by ultrasonic velocity measurements on thin plates. Longitudinal- and shear-velocity measurements were made in appropriate symmetry directions by direct contact or liquid-immersion techniques. The elastic constants determined by this pulsed through-transmission method were in agreement with micromechanical theories based on the properties of the constituent materials. Agreement was also found between engineering constants determined by mechanical testing and those calculated from the ultrasonic data. Finally, measurement of the ultrasonic-wave velocity has also been shown to be a rapid nondestructive-test method for determining filament-volume fraction in a fabricated part.