Anomalous Stereochemistry in the Wittig Reaction Induced by Nucleophilic Groups in the Phosphonium Ylide

Abstract

Reaction of ylides from 3–9 with benzaldehyde show that carboxylate and oxido functionalities proximate to the ylide center promote anomalously high E stereoselectivity in alkene formation. Through the use of α-deuterated ylides 12–14, an internal “trans-selective Wittig” mechanism was ruled out as a principal source of exaggerated E alkene production.     

Food structure: Roles of mechanical properties and oral processing in determining sensory texture of soft materials

There is a desire to alter food composition to make foods healthier and at the same time not diminish sensory quality. This requires an understanding of key elements of food structure associated with texture perception. Texture, in part, is perceived during oral processing of food. Knowledge of structure–oral processing–texture interrelations could be utilized to develop or prevent specified textural attributes. Overall, the investigation of structure–oral processing–texture interrelations is just starting as a research focus. Factors including non-universal and inconsistent sensory terminology, omission of consideration for structural changes incurred by oral processes, and the lack of cross-disciplinary investigations hamper progress in this field. Consideration of these factors in future investigations on sensory texture will increase the applicability of their findings and bring us closer to understanding the contribution of food structure to sensory texture.     

Synthesis,Characterization and Properties of a Novel Environmentally Friendly Mono Azo Disperse Dye and Its Application on Polyethylene Terephthalate (PET)

The aim of this research is to achieve the synthesis of a novel mono azo disperse dye containing both a β‐naphthyl acetate group and carboxylic acid ester group and application on PET fabric. In this study the dyeing properties have also been investigated. The synthesized dye was characterized using UV‐Vis, FTIR, ¹H NMR and ¹³C NMR spectroscopic techniques. To investigate alkali‐clearability, both alkali‐hydrolysis behavior and the effect of its fastness properties with regard to PET fabric were examined. This dye showed a reasonable level of hydrolysis under relatively mild alkaline conditions. The application of the dye to PET fabric showed good leveling and building up properties. Estimating fastness properties of the dyed fabric showed excellent wash, rubbing fastness, good light and sublimation fastness. The results furthermore displayed that the synthesized dye offers the option of alkali‐clearing process over that of a conventional reduction‐clearing process. Therefore, the value of Chemical Oxygen Demand (COD), Biological Oxygen Demand (BOD) and water pollution as well as the expenditure of production were decreased.     

A Simple Approach for Multi‐fidelity Experimentation Applied to Financial Engineering

In practical applications, information about the accuracy or ‘fidelity’ of alternative surrogate systems may be ambiguous and difficult to determine. To address this problem, we propose to treat surrogate system fidelity level as a categorical factor in optimal response surface design. To design the associated experiments, we apply the Expected Integrated Mean Squared Error optimal design criterion, which takes into account both variance and bias errors. The performance of the proposed design was compared using three test cases to four types of alternatives using the Empirical Integrated Squared Error. Because of its ability to foster relatively accurate predictions, the proposed design is recommended in fidelity experimental design, particularly when the experimenters lack sufficient information about the fidelity levels of surrogate systems. The method was applied to the case of intraday trading optimization in which data were collected from the Taiwan Futures Exchange. We also calculated the implied volatility from the Merton's Jump‐diffusion model via the fast Fourier transform algorithm with three different models of varying fidelity levels. Copyright © 2014 John Wiley & Sons, Ltd.     

Titanocene-catalyzed metallation of propargylic acetates in homopropargyl alcohol synthesis

The titanium-catalyzed metallation and subsequent carbonyl addition of propargylic acetates enable the direct formation of homopropargylic alcohols in good yields. The corresponding products were obtained as single regioisomers without the corresponding allene adducts observed.     

Integrating open‐source software applications to build molecular dynamics systems

Three open‐source applications, NanoEngineer‐1, packmol, and mis2lmp are integrated using an open‐source file format to quickly create molecular dynamics (MD) cells for simulation. The three software applications collectively make up the open‐source software (OSS) suite known as MD Studio (MDS). The software is validated through software engineering practices and is verified through simulation of the diglycidyl ether of bisphenol‐a and isophorone diamine (DGEBA/IPD) system. Multiple simulations are run using the MDS software to create MD cells, and the data generated are used to calculate density, bulk modulus, and glass transition temperature of the DGEBA/IPD system. Simulation results compare well with published experimental and numerical results. The MDS software prototype confirms that OSS applications can be analyzed against real‐world research requirements and integrated to create a new capability. © 2014 Wiley Periodicals, Inc.     

Fast Li-Ion Conduction in Spinel-Structured Solids

Spinel-structured solids were studied to understand if fast Li⁺ ion conduction can be achieved with Li occupying multiple crystallographic sites of the structure to form a “Li-stuffed” spinel, and if the concept is applicable to prepare a high mixed electronic-ionic conductive, electrochemically active solid solution of the Li⁺ stuffed spinel with spinel-structured Li-ion battery electrodes. This could enable a single-phase fully solid electrode eliminating multi-phase interface incompatibility and impedance commonly observed in multi-phase solid electrolyte–cathode composites. Materials of composition Li_1.25M(III)_0.25TiO₄, M(III) = Cr or Al were prepared through solid-state methods. The room-temperature bulk Li⁺-ion conductivity is 1.63 × 10⁻⁴ S cm⁻¹ for the composition Li_1.25Cr_0.25Ti_1.5O₄. Addition of Li₃BO₃ (LBO) increases ionic and electronic conductivity reaching a bulk Li⁺ ion conductivity averaging 6.8 × 10⁻⁴ S cm⁻¹, a total Li-ion conductivity averaging 4.2 × 10⁻⁴ S cm⁻¹, and electronic conductivity averaging 3.8 × 10⁻⁴ S cm⁻¹ for the composition Li_1.25Cr_0.25Ti_1.5O₄ with 1 wt. % LBO. An electrochemically active solid solution of Li_1.25Cr_0.25Mn_1.5O₄ and LiNi_0.5Mn_1.5O₄ was prepared. This work proves that Li-stuffed spinels can achieve fast Li-ion conduction and that the concept is potentially useful to enable a single-phase fully solid electrode without interphase impedance.     

Changes in metal specificity due to iron ligand substitutions in reaction centers fromRhodobacter sphaeroides

Bacterial reaction centers have a single nonheme iron that is located between two bound quinones, Q_A and Q_B, which are the primary and secondary electron acceptors during photosynthesis, respectively. InRhodobacter sphaeroides, the iron is coordinated by four nitrogen atoms, contributed by histidines at L190, L230, M219, and M266, and two oxygen atoms, contributed by Glu at M234. The roles of these ligands in determining the metal-binding specificity and electron transfer properties of the quinones were investigated by mutagenesis. Each of the four His ligands was changed to Glu, Gln, and Cys, whereas Glu was changed to His, Gln, Cys, and Asp. All mutants supported photosynthetic growth except for those with substitutions of Glu or Cys at L190 or M219. The metal specificity of isolated mutant RCs was determined by measurements using atomic absorption and 35 GHz electron paramagnetic resonance spectroscopy. The M234 mutants had a lesser iron specificity than the wild type with a mole fraction of 0.7 to 0.8 iron but retained a total metal content of 1.0. All His mutants had an even lower iron content with mole fractions of 0.04 to 0.16. The His to Cys at M266 mutant had a significantly greater amount of bound zinc that was further enhanced when the strain was grown in zinc-supplemented media. The charge recombination rates from Q _B ^?. , which ranged from 0.5 to 1 s^?1 in the mutants, were comparable to the 1 s^?1 value for the wild type. Charge recombination from Q _A ^?. showed complex kinetics, with rates of 15 to 30 s^?1 for the L190, L230, and M234 mutants and 200 s^?1 for the M266 mutants compared with 8 s^?1 for the wild type. The faster rates in the mutants most likely reflected a smaller free energy difference between Q _A ^?. and Φ _A ^? , a nearby bacteriopheophytin, with the smaller energy difference facilitating indirect recombination. All of the mutants transferred electrons to the secondary quinone, with rates (1200 to 4700 s^?1) comparable to that of the native (3700 s^?1). The data demonstrate that neither the ligands nor the bound metal play a critical role in the electron transfer processes at the acceptor side.     

Local strain and defects in silicon wafers due to nanoindentation revealed by full‐field X‐ray microdiffraction imaging

Quantitative characterization of local strain in silicon wafers is critical in view of issues such as wafer handling during manufacturing and strain engineering. In this work, full‐field X‐ray microdiffraction imaging using synchrotron radiation is employed to investigate the long‐range distribution of strain fields in silicon wafers induced by indents under different conditions in order to simulate wafer fabrication damage. The technique provides a detailed quantitative mapping of strain and defect characterization at the micrometer spatial resolution and holds some advantages over conventional methods.     

Simultaneous Detection of Single Attoliter Droplet Collisions by Electrochemical and Electrogenerated Chemiluminescent Responses

We provide evidence of single attoliter oil droplet collisions at the surface of an ultra‐microelectrode (UME) by the observation of simultaneous electrochemical current transients (i–t curves) and electrogenerated chemiluminescent (ECL) transients in an oil/water emulsion. An emulsion system based on droplets of toluene and tri‐n‐propylamine (2:1 v/v) emulsified with an ionic liquid and suspended in an aqueous continuous phase was formed by ultrasonification. When an ECL luminophore, such as rubrene, is added to the emulsion droplet, stochastic events can be tracked by observing both the current blips from oxidation at the electrode surface and the ECL blips from the follow‐up ECL reaction, which produces light. This report provides a means of studying fundamental aspects of electrochemistry using the attoliter oil droplet and offers complementary analytical techniques for analyzing discrete collision events, size distribution of emulsion systems, and individual droplet electroactivity.