Stability‐indicating HPTLC method for quantitative estimation of silybin in bulk drug and pharmaceutical dosage form

In the present study a novel stability‐indicating high‐performance thin‐layer chromatography (HPTLC) method for quantitative determination of silybin in bulk drug and nanoemulsion formulation has been developed and validated on silica using solvent chloroform–acetone–formic acid (9 : 2 : 1 v/v/v) (R_f of silybin 0.46 ± 0.05) in the absorbance mode at 296 nm. The method showed a good linear relationship (r² ± 0.999) in the concentration range 25–1500 ng per spot. It was found to be linear, accurate, precise, specific, robust and stability‐indicating and can be applied for quality control and standardization of several multi‐component hepatoprotective formulations as well as for stability testing of different dosage forms. The method proposed was also used to investigate the kinetics of acidic and alkaline degradation processes by quantification of drug at different temperature to calculate the activation energy and half‐life for silymarin degradation. Copyright © 2009 John Wiley & Sons, Ltd     

Development of an HPTLC‐based diagnostic method for invasive aspergillosis

A rapid, sensitive and specific high‐performance thin‐layer chromatographic (HPTLC) method was developed and validated for determination of gliotoxin in Aspergillus infected immunocompromised patients with invasive aspergillosis (IA). Densitometric analysis of gliotoxin was carried out in the absorbance mode at 254 nm after single‐step extraction with chloroform. The method uses TLC aluminum plates pre‐coated with silica gel 60F‐254 as a stationary phase and toluene–isoamyl alcohol–methanol (10:0.5:0.5, v/v/v) as mobile phase, which gives compact spot of gliotoxin (R_f = 0.51). The calibration curve was linear (r² ≥ 0.994) between peak area and concentration in the tested range of 100–1000 ng spot^?1 with minimum detectable range 0.025 ng μ^?1 of serum sample. The mean ± SD value of slope and intercept of the standard chromatogram of gliotoxin were found to be 523.2 ± 1.555635 and 915.8 ± 30.68843, respectively. The developed method is simple, rapid, precise and less costly than earlier diagnostic methods, and different serum samples can be run on a single TLC plate for comparative analysis. The proposed method can be used to analyze gliotoxin in patient serum for easy, rapid and cost‐effective diagnosis of IA. Copyright © 2009 John Wiley & Sons, Ltd.     

Development and optimization of the SPE procedure for determination of pharmaceuticals in water samples by HPLC‐diode array detection

This paper focuses on the investigation of different types of SPE sorbents for the preconcentration of eight veterinary pharmaceuticals from water samples. The pharmaceuticals studied were sulfamethazine, sulfadiazine, sulfaguanidine, trimethoprim, oxytetracycline, enrofloxacin, norfloxacin and penicillin G/procaine. Five different SPE materials (Strata‐X, Strata‐X‐C, Strata SDB‐L, Strata C8 and Strata C18) from Phenomenex were compared with Oasis HLB with a view to obtaining the best cartridges for all pharmaceuticals investigated. Extraction efficiency was determined by HPLC with diode array detection (DAD). HPLC‐DAD separation and quantification of the selected pharmaceuticals were carried out under gradient elution by a binary mixture of 0.01 M oxalic acid and ACN based on cyano modified column (LiChrosphere 100 CN) from Merck. Strata‐X provided the best results in the preconcentration of 100 mL water samples, yielding average pharmaceutical recoveries of higher than 90%, except for sulfaguanidine (76.1%). The developed Strata‐X‐HLPC‐DAD method was validated and applied, for the efficient investigation of reverse osmosis/nanofiltration membranes and for the removal of these eight pharmaceuticals from the production wastewater samples. NF90 and XLE membranes were shown to be the best for the rejection of all investigated pharmaceuticals.     

Stable and tunable phosphorescent neutral cyclometalated Au(III) diaryl complexes

A series of novel luminescent cyclometalated Au(III) neutral complexes of the type cis-[(N(∧)C)AuL] [N(∧)C = 2-phenylpyridine (ppy), L = 1,1'-biphenyl (1)] and cis-[(N(∧)C)AuL(2)] [N(∧)C = 2-phenylpyridine (ppy), L = C(6)H(5) (2), C(6)F(5) (3), C(6)H(4)-CF(3)-p (4), 2-C(4)H(3)S (5)]; [N(∧)C = 2-(2-thienyl)pyridine (thpy), L = C(6)H(5) (6), C(6)F(5) (7)]; [N(∧)C = 2-(5-methyl-2-thienyl)pyridine (5 m-thpy), L = C(6)F(5) (8)] were successfully synthesized. The X-ray crystal structures of all compounds except 3 have been determined. These complexes were found to show long-lived emission in solution at room temperature. The emission origins of the complexes have been tentatively assigned to be derived from triplet states predominantly bearing intraligand (IL) character with some perturbation from the metal center. Density functional theory (DFT) calculations were performed to evaluate the stability associated with the complexes and TD-DFT calculations to ascertain the nature of the excited state. Variation of the cyclometalated ligands in the complexes readily leads to the tuning of the nature of the lower energy emissive states.     

Preparation and characterization of hydroxypropyl-β-cyclodextrin inclusion complex of eugenol: differential pulse voltammetry and (1)H-NMR

The objective of present investigation was to improve the solubility of Eugenol by preparing the inclusion complex of Eugenol with hydroxypropyl-β-cyclodextrin (Hp-β-CD) and characterize the prepared complex by using NMR and differential pulse voltammetry (DPV). Phase solubility curve was plotted using Hp-β-CD in ranging from 0-40 mM of Hp-β-CD and found to be linear. Therefore, inclusion complex was prepared in equimolar ratio of Eugenol and Hp-β-CD by lyophilization method. Fourier transform infrared spectroscopy (FT-IR), (1)H-NMR and DPV were performed for Eugenol, Hp-β-CD and prepared inclusion complex of Eugenol. 2D (two dimensional) NMR was also performed for prepared inclusion complex. The proton of phenol moiety of Eugenol experienced a pronounced chemical shift variation in (1)H-NMR. The positive sign of the variation for proton in (1)H-NMR indicated that the proton was located near to an oxygen atom in the Hp-β-CD cavity and its magnitude showed a strong interaction between -OH proton of Eugenol and Hp-β-CD. 2D NMR confirms the interaction between phenolic group and hydrogen atoms of Hp-β-CD. A well defined anodic peak current corresponding to oxidation of Eugenol in non-encapsulated and Hp-β-CD-Eugenol inclusion complex in phosphate buffer (pH 6.8) was obtained at about 0.35 V and 0.40 V, respectively. The positive shift in oxidation potential indicated the formation of complex via hydrophobic interactions. The oxidant power of Eugenol was retained in complex form as indicated by DPV results. Thus, its oxidation dependent pharmacological property such as antimicrobial activity is not affected after complexation with Hp-β-CD. Thus, (1)H-NMR, 2D-NMR and DPV techniques can be used as valuable tools to determine the mechanism of complexation and state of electrochemical active drug in inclusion complex.     

Anti-ulcer activity of Smithia conferta in various animal

Smithia conferta Sm. (Leguminasae), is a commonly used plant in Indian traditional medicine. In the current study anti-ulcer activity of its petroleum ether, alcohol and aqueous extracts of leaves were investigated using different animal models. All extracts were also subjected to phytochemical analysis and their toxic potential. Petroleum ether extract was found to contain steroids; alcohol extract revealed the presence of isoflavonoids, alkaloids and carbohydrates; while aqueous extract was found to contain amino acids, carbohydrates and flavonoids. S. conferta aqueous and alcoholic extracts were found to be non-toxic up to 5000 mg/kg dose level while petroleum ether extract was safe only up to a dose of 2000 mg/kg after single dose administration of the extracts.During confirmation of the claimed anti-ulcer activity, treatment with aqueous and alcoholic extracts showed significant reduction in ulcer index, free acidity as well as total acidity in pylorus ligated rats. However, petroleum ether extract showed relatively less profound reduction in all these indices. The anti-ulcer activity observed in aqueous extract treatment group was nearly equivalent to the standard group.     

Flexible,dicationic imidazolium salts for in situ application in palladium‐catalysed Mizoroki–Heck coupling of acrylates under aerobic conditions

The synthesis, characterization and in situ catalytic performance of new unsymmetric N,N′‐disubstituted imidazolium‐based dicationic salts in Mizoroki–Heck coupling of acrylates with aryl bromides under aerobic conditions are described. A series of flexible dicationic salts with varying steric and electronic properties were synthesized in good to excellent yields. All the salts were well characterized using spectroscopic techniques. X‐ray diffraction analysis of two salts with the same dicationic backbone and different counter anions shows that the ligand adopts two different conformations which are influenced by the nature of the anion. Thus, the ligand is capable of changing its conformation according to the change in environment due to its flexible nature. All the synthesized imidazolium salts were found to be active in in situ palladium‐catalysed Mizoroki–Heck coupling under aerobic conditions. Amongst the salts, the hydroxyl‐functionalized imidazolium salt, incorporating the features of both bidentate chelating O,O ligand and carbene, shows the maximum catalytic activity. A variety of aryl and heteroaryl methyl and ethyl cinnamates were synthesized using these imidazolium salts as preligands. In addition, NMR studies confirm in situ generation of normal N‐heterocyclic carbenes from the C‐2 position of imidazol‐2‐ylidene ring. The mercury poisoning test was also performed to ascertain the nature of catalytically active palladium species. Aerobic conditions, low catalytic loading (0.5 mol%), shorter reaction times, broad functional group tolerance and good to excellent isolated yields are some of the significant features of the novel catalytic systems described here. Copyright © 2016 John Wiley & Sons, Ltd.     

Nickel‐Catalyzed Esterification of Aliphatic Amides

Recent studies have demonstrated that amides can be used in nickel‐catalyzed reactions that lead to cleavage of the amide C?N bond, with formation of a C?C or C?heteroatom bond. However, the general scope of these methodologies has been restricted to amides where the carbonyl is directly attached to an arene or heteroarene. We now report the nickel‐catalyzed esterification of amides derived from aliphatic carboxylic acids. The transformation requires only a slight excess of the alcohol nucleophile and is tolerant of heterocycles, substrates with epimerizable stereocenters, and sterically congested coupling partners. Moreover, a series of amide competition experiments establish selectivity principles that will aid future synthetic design. These studies overcome a critical limitation of current Ni‐catalyzed amide couplings and are expected to further stimulate the use of amides as synthetic building blocks in C?N bond cleavage processes.     

Spectroscopic and thermal investigations of complexes of Cr<Superscript>III</Superscript>, Mn<Superscript>II</Superscript>, Zn<Superscript>II</Superscript> &; Cd<Superscript>II</Superscript> - carboxamide

Complexes of Cr^III, Mn^II, Zn^II & Cd^II with the polydentate carboxamide ligandN′, N′′-bis(3-carboxy-1-oxoprop-2-enyl) 2-Amino-N-arylbenzamidine (H₂L) have been synthesized and characterized by elemental analyses, spectroscopic studies (Vibrational, electronic, ESR and ¹H-NMR), magnetic susceptibility measurements, thermal studies and powder diffraction studies. The vibrational spectral data are in agreement with coordination of amide and carboxylate oxygen of the ligands with the metal ions. The electronic spectra indicates octahedral or tetrahedral geometry around the metal ions, has been supported by magnetic susceptibility measurements. The results of electron spin resonance & ¹H-NMR spectra have supported the results of other spectral techniques. Kinetic and thermodynamic parameters were computed from the thermal data using Coats and Redfern method, which confirm first order kinetics. Powder diffraction determines the cell parameters of the complexes.