Thermal stability of UV-irradiated collagen in bovine lens capsules and in bovine cornea

The thermal stability of UVB irradiated collagen in bovine lens capsules and in bovine cornea has been investigated by differential scanning calorimetry (DSC). During UVB irradiation the lens capsules and cornea were immersed in water to keep the collagen in a fully hydrated condition at all times. UV irradiation induced changes in collagen which caused both stabilization and destabilization of the collagen structure. The helix-coil transition for non-irradiated collagen in cornea occurred near 66 degrees C, instead for the irradiated one for 3h it occurred at 69 degrees C. After irradiating for longer times (20-96h) the helix-coil transition peak occurred at much lower temperatures. The peak was very broad and suggested that collagen was reduced by UV to different polypeptides of different molecular weight and different lower thermal stabilities. The irradiation of lens capsules with UVB light in vitro resulted in changes in the thermal properties of type-IV collagen consistent with increased cross-linking. DSC of lens capsules showed two major peaks at melting temperatures at 54 degrees C Tm1 and 78 degrees C Tm2, which can be attributed to the denaturation of the triple helix and 7S domains, respectively. UVB irradiation of lens capsules in vitro for 6 h caused an increase in Tm1 from 54 to 57 degrees C. The higher temperature required to denature the type-IV collagen after irradiation in vitro suggested an increase of intermolecular cross-linking.     

Small Noncytotoxic Carbon Nano‐Onions: First Covalent Functionalization with Biomolecules

Small carbon nano‐onions (CNOs, 6–8 shells) were prepared in high yield and functionalized with carboxylic groups by chemical oxidation. After functionalization these nanostructures were soluble in aqueous solutions. 3‐(4,5‐dimethylthiazol‐2‐yl)‐5‐(3‐carboxymethoxyphenyl)‐2‐(4‐sulfophenyl)‐2 tetrazolium (MTS) tests showed excellent cytocompatibility of all CNOs analyzed at 30 and 300 μg mL^?1, so these carbon nanostructures can be safely used for biological applications. The first covalent functionalization of oxidized CNOs (ox‐CNOs) with biomolecules, by using biotin–avidin interactions is reported here. Multilayers were prepared on a gold surface by layer‐by‐layer assembly and the process was monitored by surface plasmon resonance (SPR) spectroscopy and atomic force microscopy (AFM). Covalent binding of molecules to the short amine‐terminated organosulfur monolayers was assessed by Fourier transform infrared spectroscopy using total attenuated reflactance mode (FT‐IR/HATR).     

Counting alternating knots by genus

It is shown that the number of alternating knots of given genus g>1 grows as a polynomial of degree 6g−4 in the crossing number. The leading coefficient of the polynomial, which depends on the parity of the crossing number, is related to planar trivalent graphs with a Bieulerian path. The rate of growth of the number of such graphs is estimated.     

Adsorption-induced deformation of microporous carbons: pore size distribution effect

We present a thermodynamic model of adsorption-induced deformation of microporous carbons. The model represents the carbon structure as a macroscopically isotropic disordered three-dimensional medium composed of stacks of slit-shaped pores of different sizes embedded in an incompressible amorphous matrix. Adsorption stress in pores is calculated by means of Monte Carlo simulations. The proposed model reproduces qualitatively the experimental nonmonotonic dilatometric deformation curve for argon adsorption on carbide-derived activated carbon at 243 K and pressure up to 1.2 MPa. The elastic deformation (contraction at low pressures and swelling at higher pressures) results from the adsorption stress that depends strongly on the pore size. The pore size distribution determines the shape of the deformation curve, whereas the bulk modulus controls the extent of the sample deformation.     

Immersed boundary method for unsteady kinetic model equations

Predicting unsteady flows and aerodynamic forces for large displacement motion of microstructures requires transient solution of Boltzmann equation with moving boundaries. For the inclusion of moving complex boundaries for these problems, three immersed boundary method flux formulations (interpolation, relaxation, and interrelaxation) are presented. These formulations are implemented in a 2‐D finite volume method solver for ellipsoidal‐statistical (ES)‐Bhatnagar‐Gross‐Krook (BGK) equations using unstructured meshes. For the verification, a transient analytical solution for free molecular 1‐D flow is derived, and results are compared with the immersed boundary (IB)‐ES‐BGK methods. In 2‐D, methods are verified with the conformal, non‐moving finite volume method, and it is shown that the interrelaxation flux formulation gives an error less than the interpolation and relaxation methods for a given mesh size. Furthermore, formulations applied to a thermally induced flow for a heated beam near a cold substrate show that interrelaxation formulation gives more accurate solution in terms of heat flux. As a 2‐D unsteady application, IB/ES‐BGK methods are used to determine flow properties and damping forces for impulsive motion of microbeam due to high inertial forces. IB/ES‐BGK methods are compared with Navier–Stokes solution at low Knudsen numbers, and it is shown that velocity slip in the transitional rarefied regime reduces the unsteady damping force. Copyright © 2015 John Wiley & Sons, Ltd.     

The review of versatile application of collagen

This review reports recent advances in the versatile application of collagen. Collagen materials have attracted great attention because they exhibit properties required in cosmetic preparations, in the biomedical field, and in the tanning industry leading to leather production. Herein, the structure and application of collagen are discussed in general, and detailed examples are also drawn from scientific literature and practical work. Copyright © 2016 John Wiley & Sons, Ltd.     

3-Methoxalylchromones--versatile reagents for the regioselective synthesis of functionalized 2,4'-dihydroxybenzophenones, potential UV-filters

The reaction of 1,3-bis-silyl enol ethers with 3-methoxalylchromones affords a great variety of functionalised 2,4'-dihydroxybenzophenones. These products are formed by a domino Michael/retro-Michael/Mukaiyama-aldol reaction. The synthesized compounds are promising candidates for the synthesis of the novel UV-A/B and UV-B filters.     

All-boron analogues of aromatic hydrocarbons: B17- and B18-

We have investigated the structural and electronic properties of the B(17)(-) and B(18)(-) clusters using photoelectron spectroscopy (PES) and ab initio calculations. The adiabatic electron detachment energies of B(17)(-) and B(18)(-) are measured to be 4.23 ± 0.02 and 3.53 ± 0.05 eV, respectively. Calculated electron detachment energies are compared with experimental data, confirming the presence of one planar C(2v) ((1)A(1)) isomer for B(17)(-) and two nearly isoenergetic quasi-planar C(3v) ((2)A(1)) and C(s) ((2)A') isomers for B(18)(-). The stability and planarity/quasi-planarity of B(17)(-) and B(18)(-) are ascribed to σ- and π-aromaticity. Chemical bonding analyses reveal that the nature of π-bonding in B(17)(-) and B(18)(-) is similar to that in the recently elucidated B(16)(2-) and B(19)(-) clusters, respectively. The planar B(17)(-) cluster can be considered as an all-boron analogue of naphthalene, whereas the π-bonding in the quasi-planar B(18)(-) is reminiscent of that in coronene.