Terroir Effect on the Phenolic Composition and Chromatic Characteristics of Mencía/Jaen Monovarietal Wines: Bierzo D.O. (Spain) and Dão D.O. (Portugal)

‘Mencía’/‘Jaen’ it’s an important red grape variety, exclusive of the Iberian Peninsula, used in wine production namely in Bierzo D.O. and Dão D.O., respectively. This work evaluates the effect of the two different “terroirs” on the phenolic composition and chromatic characteristics of ‘Mencía’/‘Jaen’ monovarietal wines produced at an industrial scale in the same vintage. Using Principal Component Analysis (PCA), Partial Least Squares-Discrimination Analysis (PLS-DA), and Orthogonal PLS-DA (OPLS-DA) it was found that peonidin-3-coumaroylglucoside, petunidin-3-glucoside, malvidin-3-coumaroylglucoside, peonidin-3-glucoside, malvidin-3-acetylglucoside, malvidin-3-glucoside, and ferulic acid were the phenolic compounds with the highest differences between the two regions. PLS regression allowed to correlate the differences in lightness (L*) and redness (a*) of wines from ‘Jaen’ and ‘Mencía’ to differences in colored anthocyanins, polymeric pigments, total pigments, total anthocyanins, cyanidin-3-acetylglucoside, delphinidin-3-acetylglucoside, delphinidin-3-glucoside, peonidin-3-coumaroylglucoside, petunidin-3-glucoside and malvidin-3-glucoside in wines, and the colorless ferulic, caffeic, and coutaric acids, and ethyl caffeate. The wines a* values were more affected by colored anthocyanins, ferulic acid, total anthocyanins, delphinidin-3-acetylglucoside, delphinidin-3-glucoside and petunidin-3-acetylglucoside, and catechin. The positive influence of ferulic acid in the a* values and ferulic, caffeic, coutaric acids, and ethyl caffeate on the L* values can be due to the co-pigmentation phenomena. The higher dryness and lower temperatures during the September nights in this vintage might explain the differences observed in the anthocyanin content and chromatic characteristics of the wines.     

Chemo‐ and Magnetotaxis of Self‐Propelled Light‐Emitting Chemo‐electronic Swimmers

Miniaturized autonomous chemo‐electronic swimmers, based on the coupling of spontaneous oxidation and reduction reactions at the two poles of light‐emitting diodes (LEDs), are presented as chemotactic and magnetotactic devices. In homogeneous aqueous media, random motion caused by a bubble‐induced propulsion mechanism is observed. However, in an inhomogeneous environment, the self‐propelled devices exhibit positive chemotactic behavior, propelling themselves along a pH or ionic strength gradient (?pH and ?I, respectively) in order to reach a thermodynamically higher active state. In addition, the intrinsic permanent magnetic moment of the LED allows self‐orientation in the terrestrial magnetic field or following other external magnetic perturbations, which enables a directional motion control coupled with light emission. The interplay between chemotaxis and magnetotaxis allows fine‐tuning of the dynamic behavior of these swimmers.     

Remote Actuation of a Light-Emitting Device Based on Magnetic Stirring and Wireless Electrochemistry

We propose a straightforward access to a rotating light-emitting device powered by wireless electrochemistry. A magnetic stirrer is used to rotate a light-emitting diode (LED) due to the intrinsic magnetic properties of the tips that contain iron. At the same time, the LED is submitted to an electric field and acts as a bipolar electrode. The electrochemical processes that are coupled on both extremities of the LED drive an electron flow across the device, resulting in light emission. The variation of the LED alignment in time enables an alternating light emission that is directly controlled by the rotation rate. The stirring also enables a continuous mixing of the electrolyte that improves the stability of the output signal. Finally, the LED brightness can readily reveal a change of chemical composition in the electrolyte solution.     

Doping Polysulfone Membrane with Alpha‐Tocopherol and Alpha‐Lipoic Acid for Suppressing Oxidative Stress Induced by Hemodialysis Treatment

The reduction of free radicals by bioactive membranes used for hemodialysis treatment is an important topic due to the constant rise of oxidative stress‐associated cardiovascular mortality by hemodialysis patients. Therefore, it is urgent to find an effective solution that helps to solve this problem. Polysulfone membranes enriched with α‐lipoic acid, α‐tocopherol, and with both components are fabricated by spin coating. The antioxidant properties of these membranes are evaluated in vitro by determining the lipid‐peroxidation level and the total antioxidant status of the blood plasma. The biocompatibility is assessed by quantifying the protein adsorption, platelet adhesion, complement activation, and hemolytic effect. All types of membranes show in vitro antioxidant activity and a trend to reduce oxidative stress in vivo; the best results show membranes prepared with a combination of both compounds and prove to be nonhemolytic and hemocompatible. Moreover, the membrane specific separation ability for the main waste products is not affected by antioxidants incorporation.     

The Density Functional Theory Account of Interplaying Long-Range Exchange and Dispersion Effects in Supramolecular Assemblies of Aromatic Hydrocarbons with Spin

Aromatic hydrocarbons with fused benzene rings and regular triangular shapes, called n-triangulenes according to the number of rings on one edge, form groundstates with n-1 unpaired spins because of topological reasons. Here, we focus on methodological aspects emerging from the density functional theory (DFT) treatments of dimer models of the n = 2 triangulene (called also phenalenyl), observing that it poses interesting new problems to the issue of long-range corrections. Namely, the interaction comprises simultaneous spincoupling and van der Waals effects, i.e., a technical conjuncture not considered explicitly in the benchmarks calibrating long-range corrections for the DFT account of supramolecular systems. The academic side of considering dimer models for calculations and related analysis is well mirrored in experimental aspects, and synthetic literature revealed many compounds consisting of stacked phenalenyl cores, with intriguing properties, assignable to their long-range spin coupling. Thus, one may speculate that a thorough study assessing the performance of state-of-the-art DFT procedures has relevance for potential applications in spintronics based on organic compounds.     

Monthly Increase in Vitamin D Levels upon Supplementation with 2000 IU/Day in Healthy Volunteers: Result from “Integriamoci”, a Pilot Pharmacokinetic Study

Vitamin D (VD) is a calcium- and phosphate-controlling hormone used to treat bone disorders; yet, several other effects are progressively emerging. VD deficiency is highly prevalent worldwide, with suboptimal exposure to sunlight listed among the leading causes: oral supplementation with either cholecalciferol or calcitriol is used. However, there is a scarcity of clinical studies investigating how quickly VD concentrations can increase after supplementation. In this pilot study, the commercial supplement ImmuD3 (by Erboristeria Magentina^®) was chosen as the source of VD and 2000 IU/day was administered for one month to 21 healthy volunteers that had not taken any other VD supplements in the previous 30 days. Plasma VD levels were measured through liquid chromatography coupled to tandem mass spectrometry after 7, 14, and 28 days of supplementation. We found that 95% of the participants had insufficient VD levels at baseline (<30 ng/mL; median 23.72 ng/mL; IQR 18.10–26.15), but after 28 days of supplementation, this percentage dropped to 62% (median 28.35 ng/mL; IQR 25.78–35.20). The median increase in VD level was 3.09 ng/mL (IQR 1.60–5.68) after 7 days and 8.85 ng/mL (IQR 2.85–13.97F) after 28 days. This study suggests the need for continuing VD supplementation and for measuring target level attainment.     

Correction to: Interlaboratory Reproducibility of Contour Method Data Analysis and Residual Stress Calculation

Experimental Mechanics - The original version of this article has been corrected to include authors middle initials in the author list. The details given in this correction are correct.     

Impact of High-Pressure Homogenization on the Cell Integrity of Tetradesmus obliquus and Seed Germination

Microalgae have almost unlimited applications due to their versatility and robustness to grow in different environmental conditions, their biodiversity and variety of valuable bioactive compounds. Wastewater can be used as a low-cost and readily available medium for microalgae, while the latter removes the pollutants to produce clean water. Nevertheless, since the most valuable metabolites are mainly located inside the microalga cell, their release implies rupturing the cell wall. In this study, Tetradesmus obliquus grown in 5% piggery effluent was disrupted using high-pressure homogenization (HPH). Effects of HPH pressure (100, 300, and 600 bar) and cycles (1, 2 and 3) were tested on the membrane integrity and evaluated using flow cytometry and microscopy. In addition, wheat seed germination trials were carried out using the biomass at different conditions. Increased HPH pressure or number of cycles led to more cell disruption (75% at 600 bar and 3 cycles). However, the highest increase in wheat germination and growth (40–45%) was observed at the lowest pressure (100 bar), where only 46% of the microalga cells were permeabilised, but not disrupted. Non-treated T. obliquus cultures also revealed an enhancing effect on root and shoot length (up to 40%). The filtrate of the initial culture also promoted shoot development compared to water (21%), reinforcing the full use of all the process fractions. Thus, piggery wastewater can be used to produce microalgae biomass, and mild HPH conditions can promote cell permeabilization to release sufficient amounts of bioactive compounds with the ability to enhance plant germination and growth, converting an economic and environmental concern into environmentally sustainable applications.     

Development of a chemiluminescent ELISA and a colloidal gold-based LFIA for TNT detection

To identify the explosive used in a terrorist attack, or to obtain an early sign of environmental pollution it is important to use simple and rapid assays able to detect analytes at low levels, possibly on-site. This is particularly true for TNT (2,4,6-trinitrotoluene), one of the most employed explosives in the 20th century and at the same time, because of its toxicity, a well known pollutant. In this work we describe the development of an indirect competitive ELISA with chemiluminescent detection (CL-ELISA) and of a lateral-flow immunoassay (LFIA) based on colloidal gold nanoparticle labels. A commercially available monoclonal antibody was used and 13 specially synthesized conjugates were tested. We optimized the assay by determining the optimal concentration of monoclonal antibody and conjugates and the influence of various non-specific factors such as: tolerance to organic solvents at different concentrations, the washing and competitive step time, and the cross-reactivity with related compounds. The sensitivity and reproducibility of the CL-ELISA were good (LOD and IC₅₀ values in the ng mL⁻¹ range, and CV value about 7%). It has been applied to real samples of various materials involved in a controlled explosion of an “improvised explosive device”. Three extraction procedures were tested on these samples, all employing methanol as the solvent. The lateral flow immunoassay (LFIA), developed by using the same immunoreagents, reached a detection limit of 1 μg mL⁻¹ when tested on the same samples analysed by CL-ELISA.      

Mixing of electronic states in pentacene adsorption on copper

By combining experimental and theoretical approaches, we study the adsorption of pentacene on copper as a model for the coupling between aromatic molecules and metal surfaces. Our results for the interface electronic structure are not compatible with a purely physisorption picture, which is conventionally employed for such systems. Nay, we demonstrate electronic mixing between molecular orbitals and metal electronic states.